What should I pay attention to in a home inspection? Who knows?

When we talk about home inspection, it is a means to identify the condition of the house on the day in the process of real estate transactions. Housing inspection is also a technical work, you need to pay attention to the contract verification area, check the water to see the leakage, the wall should not drip without cracks, the doors and windows are flexible to listen to the sound insulation and pull off the electric switch to see the branch, etc.

1. Check the area of the contract to verify whether the actual facilities are consistent with the brand and quantity of the facilities and equipment indicated in the sales contract, and whether there are any omissions; Confirm whether the drawings attached to the sales contract are consistent with reality, whether the structure is the same as the original design drawings, whether the area of the house has been actually measured by the real estate department, and whether there is any difference between the area signed with the contract. 2 Use a tape measure to measure the height of the layer, bring your own 5 meters tape measure. Use a 5-meter tape measure to measure the floor height of the building to see if it matches the contract.

3 Check the drain to see the leakage and plugging It is necessary to check whether the bathroom floor is leaking and whether there is water. It is recommended to fill a plastic bag with sand and put it on the floor drain, and then store some water in the bathroom, shallow (about 2 cm high), and after 24 hours, go to the corresponding lower bathroom to see if there is any leakage on the top. If it is carried out at the same time as the upper floor residents, it can also be tested for leaks on the roof of their own bathrooms.

Check whether there is water on the bathroom floor, use a plastic basin to store some water in the bathroom, and then release the water to see if there is water accumulation on the ground.

4 No dripping water and no cracks on the wall Carefully check the flatness of the wall, see if there is water seepage and cracks on the wall, especially check whether there are water traces on some walls, such as the top surface, exterior wall and other places, if so, be sure to find out the cause as soon as possible. 5 Doors and windows are flexible to listen to sound insulation Try whether the doors and windows are opened flexibly, visually check whether the doors and door frames, windows and window frames are parallel to each other, close the doors and windows to listen to the sound insulation effect, and also understand their sealing degree. 6 Pull off the switch to see the branch After pulling off the switch, see whether the power is completely cut off indoors, and check whether each switch fully controls each branch line.

It is best to use a multimeter to measure whether the strong and weak currents are unblocked.

It can be seen that the house inspection is also very important, and we must pay attention to the above matters in the process of the house inspection to ensure that nothing goes wrong.

The house inspection work is the first thing to do after getting the house, there are many things that need to be paid attention to and checked, and all aspects must be checked, so the owner needs to have enough patience and care to find the problems. Let's take a closer look at this issue. What should I pay attention to when inspecting the top of the wall:

1. Wall cracks and hollow drums must not be ignored when inspecting the house and inspecting the wall cracks and hollow drums, and the cracks on the wall can be found by looking at the eyes, and the hollow drums need to be checked with the help of a detection hammer. 2. Check the verticality and flatness of the wall, in addition to checking its flatness, it is also necessary to check whether the wall is vertical and whether there is an inclination problem. In addition to visual inspection, the flatness and verticality of the wall can also be checked by tools such as rulers and corner rulers.

3. When the wall is square or not, pay attention to whether the wall is square, the two adjacent walls should be at an angle of 90 °, and you can use the angle ruler when measuring, and see whether the two opposite walls are parallel, which is an effective way to check whether the wall is square. 4. Whether the yin and yang angles are straight on the wall Yin and Yang angles (the corners of the wall are yang and yin) need to be carefully checked to see if they are straight 5. Whether there are water marks or fogging phenomena should pay special attention to check the wall of the bathroom to see if there are water traces and fogging, if this happens, it may be because the waterproof is not done well, and the other is to see whether the waterproofing on the downstairs is done well, and to avoid water leakage. What should I pay attention to in the living room and dining room when receiving the house inspection:

1. Check whether there are problems such as hollowing, cracking, sanding, exposed tendons, rust spitting, and water seepage on the top of the wall. 2. Check whether the opening, depth and net height of the living room exceed the allowable range, generally within 2 cm; There is a beam part, there is no size head error on the beam, and there is no size head error on the window sill surface and the door and window frame wall on both sides, and the general range is within 5 mm. 3. Check whether the position of the air conditioning hole in the living room is reasonable, whether there is any backflow of water, and whether the position of the outdoor unit is reasonable.

4. Pay attention to check the insulation of the exterior wall, and also see if there is water seepage. What should be paid attention to when checking the balcony and terrace during the house inspection: when checking the balcony and terrace during the house inspection, it is necessary to ensure that the height of the guardrail meets the requirements of the specification, generally the requirements below the 7th floor are meters, and the meters above the 7th floor are meters; Pay attention to check the ground condition to see if there is hollowing, cracking, water seepage, etc.; If there is a chimney on the terrace, pay attention to whether its height is higher than the extension of the interior doors and windows; Finally, it is necessary to check whether there are facilities that are easy to climb and climb over with the adjacent door or public passage, and to eliminate such potential safety hazards.

After buying a house, there will be a link of house inspection before receiving the house, and the house inspection will be carried out only after there is no problem, and the house inspection is not just about taking a look, it also needs some special tools to assist the house inspection, so what are the needs of the house inspection, and what are the precautions for the house inspection.

1. What are needed for a home inspection?

1. Vertical detection ruler.

Its main function is to detect the verticality, levelness and flatness of the walls, tiles and other places of the house, and it is an essential tool for home inspection.

2. Multi-functional internal and external detection ruler.

It is mainly used to detect the deviation of the inner and outer right angles on the object, as well as the verticality and levelness of ordinary planes. It is also one of the must-have tools for home inspections.

3. Multi-function vertical corrector.

It is a multi-functional vertical aligner used to measure the degree of verticality, and when using the aligner, the aligner should be fixed and then put down.

4. Vernier calipers.

This is a measuring tool used to measure the length of the room, as well as the inner and outer diameters and ascending. It is one of the essential tools for home inspection.

5. a feeler gauge. Its main function is to inspect various gaps in the room, insert the feeler gauge into the detected gap when using, pull the feeler gauge back and forth, and the detected number is the measured gap value.

6. Diagonal detection ruler.

It is used to detect the contrast deviation of the length of two diagonal lines of a square object.

7. Check the electrical socket.

The electrical socket is a necessary tool for house inspection, there are three indicator lights on it, if the two indicators on the right are lit at the same time, it means that there is no problem with the circuit of our house, if all three indicators are not lit, it means that there is a problem with the circuit in our room.

2. What are the precautions for home inspection?

1. Whether the top and bottom of the door have been painted, and whether the surrounding area is sealed with the door frame.

2. The window should be opened and closed flexibly, and there should be an anti-blocking cap on the outer window frame.

3. Both kitchens and bathrooms should be tiled to the top, and the ventilation holes should be located under the ceiling. The socket near the Tongna Xiaofeng hole must be a waterproof socket.

4. Test whether the switch of the faucet is flexible and effective, whether the water is smooth, and whether the drainage speed is fast enough. During the house inspection, we can wipe the upper and lower pipes with toilet paper to see if there is any leakage at the bottom when the water is discharged.

5. During the house inspection, you can also put the smoking object under the flue mouth to see if the smoke rises to the flue mouth and immediately turn and suck it away. Then put the smoking object near the alarm device to see if the device responds quickly.

6. Take a point to test whether the roof is inclined and whether the wall is flat and smooth. Knocking on floor and wall tiles with a small hammer and a hollow sound indicates that the tiles are not paved. A hollow drum rate of more than 5% is unqualified.

7. Check whether the latex paint is evenly painted under the illumination of the light.

8. The material of the water pipe directly affects the life of the waterway system and the water safety of the owner. It should be checked whether the use of qualified materials is made of oak.

The above is what is needed for home inspection, what are the precautions for home inspection, I hope it can help you understand what relevant knowledge is needed for home inspection, more decoration knowledge, decoration company evaluation, decoration cases, please continue to pay attention.

1. The ceiling is not neat. The ceiling of some real estate projects will be wavy, the ceiling and window sill lines, and the door frame lines will also be non-parallel, and the bay windows will not be neat. In the later decoration process, it can be corrected by itself.

2. The wall is not vertical. Some real estate projects will have problems such as crooked corners, crooked wall lines, uneven walls, and inclined bay windows. If these problems are serious, the owner should negotiate with the developer on how to compensate.

3. The entrance door is seriously scratched. When inspecting the house, the owner should also pay attention to whether there are scratches, holes, sloppy plastering and other problems in the entrance door, resulting in some real estate will have some problems of insensitive door locks. The owner should deal with these small problems in a timely manner during the house inspection to prevent inconvenience to life in the later stage.

4. When inspecting the house, you should check whether the windows of your house can be fully opened, not all new houses, everything is new.

5. Check whether the balcony railing can rust and whether it will cause safety problems.

6. On the bathroom water pipe, most of the time is due to water leakage, so the developer redid the floor slab.

7. Behind the door of your house, can the doorbell video screen fit?

8. Even if it is a public area, it is closely related to life. For example, if the common part next to the elevator is not done well, it may also bring hidden dangers to family life. If you live in a high-rise and the protective railing is not high, and there is no protective net, you should be early 9, and the door frames, windows, and window sills of some real estate will show worn, rusty, and unfit problems.

10. The flue of some houses will show cracks.

11. If the steel bars of the house are exposed, don't think that this is a normal phenomenon.

1. What information do you need to bring to the room?

Please bring the purchase contract, delivery notice, my ID card (it is best to ask the sales lady or property management, after all, the rules of each real estate are different, save one more trip), pay attention to the house to see if there is damage, water leakage (if the upstairs has been renovated) and other problems that can be found by the naked eye, if you feel OK after acceptance, the property management will ask you to sign, and then hand over the door key, quality assurance certificate, instruction manual and other relevant information. Of course, if you have to go through other procedures after inspecting the house, it is recommended that you bring the contract, receipts (or invoices), and documents related to the purchase of the house with you, so as to save you the need to run again.

2. What preparations should be made for the home inspection.

After receiving the notice of home inspection, we need to do some preparations for the home inspection:

You should carefully study the purchase contract to understand the rights and obligations regarding the repossession of the house, understand what the developer should provide, and what the owner has the right to ask the developer to provide;

It is best to choose an experienced friend or a professional home inspector to accompany you.

In the process of receiving, the most important thing is to find a professional person to conduct a house inspection, in the process of house inspection, we should pay special attention to the walls, water, electricity, gas, doors, windows and balconies, waterways and contracts.

1 Check the flatness of the wall and see if there are cracks.

Water seepage is a serious matter, check the top surface, exterior wall and gable of the kitchen and bathroom, and find out the cause as soon as possible if there is water seepage or cracks.

2. The water, electricity and gas should be checked when the house is closed.

Whether the water, electricity and gas can be used normally is the key point of inspection, try to make the water flow as large as possible when the faucet, and try the water pressure or the drainage speed. When inspecting the line, remember to check that each opening is fully controlled.

3. The house inspection should check whether the doors, windows, and balconies are cracked.

The new house has been placed for a long time, and there is a lot of dust backlog, and the dust should be removed first when checking the doors and windows, and attention should be paid to checking the flexibility of the doors and windows.

4. The house should be checked for the smoothness of the waterway.

Whether the waterway is smooth is related to the basic life of the home, and the place where the basin, bathtub, and sink drain pipe should be filled with water during the inspection, and the floor drain is the same, and it can be confirmed from the sound to the surface without standing water.

5. The house should be inspected and checked for acceptance of the facilities in the contract, and carefully checked against the facilities that should be in the contract, and whether the various brands and quantities are consistent.

If all the above points are okay in the new house acceptance precautions, then you can go to the house, and if there is a problem with the house inspection, you can communicate with the developer at any time to solve it.

What should I pay attention to in the home inspection? Teach you the steps to receive the house, don't be fooled after reading! Life Tips, Life Tips, Life Tips, Life Tips.

1. All kinds of housing collection materials should be complete. It must be seen whether the developer has the following documents: first, the "Construction Project Completion Record Form"; the second is the quality assurance certificate and instruction manual of the house; The third is the report on the measured data and shared area of the housing area issued by the state-recognized professional surveying and mapping unit.

2. Jointly accept the new house with the developer. The handover work mainly includes whether the structural design of the delivered house is consistent with the original drawing, whether the quality of the house and the doors and windows are the same as the contract, whether the supporting facilities such as water and electricity are in place according to the contract, and whether the other projects agreed in the purchase contract meet the requirements.