What are the tips for choosing villa decoration tiles? What tile to choose?

The operating environment in the kitchen is a high temperature environment, and the color of the tile should be mainly light and cool colors, such as white, light green, light gray and other colors. Such colors will make people feel the breath and coolness of spring in high temperature conditions, and light tones can make people feel that the space is expanding and extending, avoiding the dull and oppressive feeling of dark tones in a small space. I recommend the golden rudder tile, the cost performance is better.

1.When choosing a tile, be sure to pay attention to its wear resistance and slip resistance. I believe that many of your friends have heard of the rule of "one look, two listens, three tests, and four quantities" for ceramic tile purchase, so we have to look at whether the appearance of the tile is flat and whether the color of the tile is uniform; At the same time, use a hard object to tap the tile, the crisper the sound of the tile, the better; There is also a drop of water on the back of the tile, the slower the water absorption, the better; When purchasing, we can also use a ruler to measure tiles, and the more accurate the better.

If the above method is not feasible, then see if there is a large color difference, unevenness, and damaged edges of the tile, which is a more useful identification method.

2.The tiles for villa decoration are not as large as possible The size of the tiles selected for different family spaces is also particular. The space area is large enough, and the use of large area tiles looks more imposing and the effect is better.

However, the space is small and it is necessary to choose large tiles, which not only may not look good in the space, but also may cause a large waste.

3.Glazed brickGlazed brick is a more common type of brick in decoration, which is widely used in wall and ground decoration due to its rich color pattern and strong anti-fouling ability. Glazed bricks are bricks whose surface has been glazed, and glazed bricks and matte glazed bricks are divided according to different luster.

According to the different raw materials, it is divided into: ceramic glazed bricks, which are made of clay, have high water absorption, relatively low general strength, and are mainly characterized by red back; Porcelain glazed tiles, made of porcelain clay, have low water absorption, generally relatively high strength, and are mainly characterized by an off-white back.

4.The surface of the whole brick is not glazed, and the material and color of the front and back are the same. Full-body brick is a kind of wear-resistant brick, although there are now varieties such as seepage bricks, but relatively speaking, its color is not as good as glazed bricks.

As the current interior design is more and more inclined to plain design, all-over bricks are becoming more and more fashionable, and are widely used on the floor of decoration projects such as halls, aisles and outdoor walkways; Generally less will be used for wall coverings. Most of the anti-slip bricks belong to the whole body brick.

Hello, now the more used tiles on the market are mainly divided into: polished tiles, non-slip tiles, antique tiles, microcrystalline stone.

The difference between the brands of ceramic tiles is different, and the quality of the relationship is good or bad. If there is no problem with the cost, you can consider importing ceramic tiles, and Italian and Spanish tiles are the best among imported tiles. Italian tiles are mainly antique, and the suitable decoration style is limited, while Spanish tiles are mainly fashionable and luxurious;

Of course, if you use what kind of tiles, it mainly depends on the style you like and the consistency of the overall house design will be better!

When choosing floor tiles, it is important to consider the following aspects: First, it depends on the brand. Only well-known brands of floor tiles, the quality of their building materials can meet the national standards, and the content of harmful substances can be within a safe range.

Second, it depends on its anti-pollution ability, if the family is very busy and can only clean once in two or three days, then choose the one with better anti-pollution ability. Third, if there are elderly people and children at home, you must do a slip resistance test when purchasing. Specifically, the selection of floor tiles can start from the following aspects:

1.To see if the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.

2.It is necessary to observe whether the particles of the cross-section of the tile are fine. The cross-section here does not refer to the cutting surface around the tile, but to the fracture of the tile fragment.

Generally speaking, the fracture is fine, hard and brittle, and the color is the same. Because the ceramic tiles with fine particles have strong waterproof ability, while the tiles with large particles are easy to soak in moisture, which affects the quality.

3.Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze, the better the quality.

4.To listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.

5.Test the waters. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, see if the marks left by the water on the front are obvious. The density of tiles that infiltrate slowly after the water disperses is large, and the marks left by the water are not obvious, so they are regarded as the top grade.

6.Warp. Take two bricks back to back and face to face to see if they can be in close contact, and there is no phenomenon that the gap is too large to judge whether there is warping.

7.Infiltration. Find ink to apply to the surface for 1 hour and then scrub to see if there are traces, no traces are good bricks, and those that have infiltration are resolutely not selected.