-
Hello bro. There are two ways, one is to get a little money by yourself, and the speed is relatively fast.
One is, you can repair it yourself, but it is not safe, you can remove the shell and dry it with a wind blow, or put it in the sun to expose it, in fact, it is very effective, and the mobile phone keyboard will be restored after a few days, but not all keys will be good so quickly, and individual keys will be good later.
My phone was repaired with the second one, because it was Nokia so I was relieved, and it was okay to dry it.
If the quality of your mobile phone is not good and you are in a hurry to use the advice to go to the repair shop to help you repair it, in fact, they also use this method, but others have tools and understand, they repair faster than themselves, and insurance, because it is not suitable for a long time, it is recommended to let them repair it.
-
The most taboo thing about electronic products falling into the water is to turn on them immediately, and they will be short-circuited when they are turned on. If you wait until your phone is completely dried before turning it on, there is no problem at all. Now it's only time to fix it.
-
Your phone hasn't dried up yet, don't turn it on!! It's easy to short circuit, and the current sound of the earpiece is water ingress, which was like this last time. You wait until it's completely dry and then try it, mine will slowly get better, but if it doesn't work, it's a short circuit, send it for repair.
-
The boss fell into the water and should be picked up and shut down immediately. . . How can you turn it on, power it up, power it up, it will short circuit, and if you do it, it will burn out parts.
-
1. Remove the mobile phone from the water as soon as possible, and turn it off immediately.
This is very important, whether the screen is black or not, please quickly shut down to prevent the motherboard from being burned out by short circuit, if you press and hold the power button to turn off, please press and hold the power button and the home button until the system shuts down.
2. Take out the SIM card, remove the mobile phone case and other objects, and use a tissue or cloth to remove the water outside the fuselage and in the crevices.
Wipe the SIM card as soon as possible after it is removed. Note that the headphones and power connector can be plugged in and blotted dry with a small cotton swab or paper towel strip.
3. Wrap the body with a towel or paper towel with good water absorption to absorb the water.
Don't use the method of throwing. Shaking will cause the water that has already entered the fuselage to spread, and it will come into contact with elements that cannot touch the water, causing even worse results.
4. If it is mild water ingress, you can wrap the fuselage with a paper towel and put it in a small bag of desiccant (often attached to food) at the same time as the bag, or you can put it full of rice. bag, try to drain the air and seal. Then put the whole set in a slightly heated place, such as a computer heat.
1. If the screen turns black and you can't press the power button to turn it on, once the device is working, it is easy to short circuit and cause damage to the motherboard.
2. Do not use the hot air of the hair dryer to blow or expose to the sun, which will cause the circuit board to deform.
3. Do not turn on the test frequently within 24 hours after falling into the water, and place it in a cool place for half a day to install the battery for testing.
4. If the above steps do not solve the problem, do not easily try to disassemble the machine, please consult an authorized repairer for processing.
-
With smartphones changing your life and everything in your life seems to be filled with smartphones, accidents are inevitable when you use them in daily use. I believe that many users have the experience of dropping their iPhone into the toilet, sink or even putting it in the washing machine with their clothes and pants, so what should I do if my iPhone falls into the water?
Precautions after iPhone falls into the water:
1. Remove the phone from the water as soon as possible, and immediately remove the battery and SIM card to prevent short circuit and loss of contacts.
2. If the iPhone falls into drinkable fresh water, the problem is not very big, if it is salt water such as seawater, it will be very troublesome to clean up once it forms a "salt crust" in the internal components of the mobile phone, if you are an unfortunate member, then you can rinse the phone with fresh water, of course, after removing the battery and SIM card.
3. Wipe the inside of the phone with a clean cloth or paper towel, do not move and shake the phone too much, and avoid water scurrying inside the phone.
4. Wrap your iPhone with a clean cloth or paper towel to create a small vacuum effect and suck out excess moisture, preferably in a place where the heating is circulating.
5. The water-filled iphone can be put into the rice tank for 24 hours, the rice has good water absorption, which can save the damp mobile phone, of course, it needs to be turned off and put in.
6. Try to turn on the phone after 24 hours of entering the water, if the battery cannot be charged, then you must change the battery.
7. There is a small white dot near the battery compartment, if it has turned red, then the maintenance personnel know that it is not the equipment'Quality problems, all the next repairs have to pay for themselves.
iPhone fell into the water four steps to rescue the method:
Step 1: Remove your phone from the water and remove the battery as quickly as possible.
Step 2: Take out the SIM card of your iPhone, wipe it with a paper towel and place it in a ventilated place to dry.
Step 3: If you are familiar with the internal structure, you can disassemble the internal accessories to dry, the effect is better.
Step 4: Under normal circumstances, the above three steps can be basically done without soaking in water for too long, if it cannot be turned on normally, it may be that the motherboard is broken and needs to be dealt with at the maintenance station.
Four taboos in the iphone falling into the water:
The first taboo: use the hot air of a hair dryer or expose it to the sun, which will cause the circuit board to deform.
The second taboo: can not press the power button to shut down, once press the shutdown button the device will work, it is easy to short circuit, resulting in damage to the motherboard.
The third taboo: do not frequently turn on the test within 24 hours of falling into the water, and wait at least 1 day before installing the battery for testing.
The fourth taboo: Do not press any keys before the device dries to prevent short circuit and damage to the motherboard.
-
1. First of all, you should turn off the phone directly (other mobile phones can remove the battery, just take the battery to prevent short circuit; At the same time, it is also necessary to take out the SIM card to avoid losing the contact information. The longer it stays in liquids, the more damage your phone will suffer for life.
2. See if the "water damage sensor" is discolored. The "water damage test strip" is a white dot near the battery box, and if it has turned red, the customer service staff knows that it is not a problem with the quality of the device, but that you have used it improperly and caused the damage due to water ingress. So don't expect repairs and insurance, and pay for your own phone repairs.
3. Pray that the phone will not fall into salt water, but drinkable fresh water. Because salt water can form a "salt crust" in the delicate internal components of the phone. So if the phone unfortunately falls into the seawater, you need to gently rinse it with fresh water – after removing the battery and SIM card, of course, and before the drying process begins.
4. Wipe each part of the phone with a cloth or paper towel, and do not move or shake the phone too much, so as to avoid water swimming everywhere inside the phone.
5. Try to wrap your phone in a cloth or tissue for a few minutes to create a small "vacuum effect" and absorb too much water. If possible, put the phone in a place with warm air circulation for a few hours.
6. Finally, put the mobile phone in a jar or bag full of rice for at least 24 hours, during which time it cannot be turned on. Rice absorbs water very well and can help you save your phone from moisture.
After hours, you can try turning on your phone, hoping that there are no remaining corrosion or short circuit problems. If the charger works, but the battery doesn't, you have to replace the parts.
-
1. Quickly scoop up your phone.
In this case, don't panic, you have to quickly get the iphone6 out of the water, many netizens have done the iphone waterproof test before, and the test results show that the iphone6 is no problem to use normally within ten seconds after falling into the water, so at this time, you must not panic, you must quickly pick it up.
2. Shut down. After scooping it up, it should be shut down quicklyOperation method:
Press and hold the [Power Button];
If you can't turn off by pressing and holding the [Power Button], you can press and hold the [Home Button] and [Power Button] at the same time to force the shutdown;
3. Remove the phone case.
It is estimated that all of you have a protective case such as a mobile phone case on your iphone6, so you must take off the phone case after shutting it down, this is to prevent the water in the phone case from seeping into the iphone6 and then damaging the motherboard;
4. Wipe the outside of the iphone6 body.
After taking off the phone case, use a dry towel or other paper towel to dry the water on the exterior of the iphone6 body;
5. Take out the SIM card.
After completing the above steps, quickly remove the SIM card and place it in a dry and ventilated place;
6. Blot up the water in the small pores of the iPhone6 body.
After completing the above operations, remember to blot up the stagnant water in the small hole in the outer gap of the iPhone 6 body;
7. Overall drying.
After the above operation, put the phone into a bag full of rice, try to empty the air as much as possible, and then seal it, as shown in the picture below: then you can put the whole bag next to the computer you are using, and it is good to heat it slightly, or other places that are slightly hot.
-
What should I do if my phone falls into the water?
-
It is recommended that you turn your best power off first!
Apple's mobile phone board can't be removed! If you don't turn it off, put it in the rice bag, are you an Apple phone or a power-on state! After shutting down, put it in a rice bag and absorb whoever is dry! It is recommended that you leave it for two days!
-
What should I do if my phone falls into the water?
-
If your iPhone falls into the water, you must not turn it on again. It's best to be able to send him directly to Apple's nearest after-sales service point for inspection. Of course, you can also choose to use a hair dryer to dry it.
Or just put your love crazy in your own rice pile for an evening. See again the next day.
-
Send it to the mobile phone store immediately and ask a professional master to check it.
-
Quickly take out the mobile phone, first turn off the mobile phone, take off the mobile phone case, take out the SIM card and the bracket to dry, wipe the whole body of the mobile phone with a dry cloth with strong water absorption (the volume button is also required), use a cotton swab to absorb the moisture of each interface and wipe it dry, and then put the mobile phone in a dry and warm place to air dry naturally (at least 48 hours).
-
Do not turn on the machine, blow dry and send it to the after-sales service.
-
Turn it off directly, then let it dry, and then turn it on again.
Hello, method 1: If you accidentally get water into the case, you can use a granular substance called silicone to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will all disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch. >>>More
If you are using a Huawei phone, we recommend that you do the following: >>>More
Connect the data cable to the computer, open itune, and then press the home button + power button together, after restarting, itune will find a device that needs to be restored, click restore to flash the firmware again.
1 Water ingress and crashing are the two major taboos in the use of mobile phones, and water ingress of mobile phones is particularly serious. According to an engineer from Guoxin, after the mobile phone gets into the water, the first thing to do is to turn off the power, of course, not to press the shutdown button, but to remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and then send it for repair as soon as possible. >>>More
Hello: According to your description, because seawater will erode electronic components, in order to avoid secondary damage to your mobile phone, it is recommended to remove the battery, SIM card, SD card, contact Samsung service center for testing, service center specific address and contact**Please refer to the following link: (It is recommended that you contact the service center before going).