How to install a frameless glass door lock Frameless glass door lock installation method

How to install a frameless glass door lock.

1. Use the U-shaped bracket to install the magnetic lock on the frameless glass door

Glass doors without a frame need to have accessories to assist in installation. The installation method is basically the same as the surface installation method of the ordinary door, except that the third step is different when installing the iron plate, the U-shaped groove together with the rubber cushion and the stainless steel gasket (placed on the side of the lock screw) is set on the glass door, and the headless hexagon socket screw is locked on the glass door, and then the relay iron plate is fixed on the U-shaped groove. For different glass door thicknesses and different types of electromagnetic locks.

2. Use the AB frame to install, first fix the AB frame on the glass door with special glass glue (or double-sided tape), and then fix the relay iron plate on the bracket.

Frameless glass door installation points:

1. Pay-off positioning: At the beginning of the installation of the frameless glass door, it is necessary to unify the pay-off positioning of the fixed glass partition and the movable glass door leaf, and the position of the door frame should be determined, and the ground elevation and the top elevation of the door frame should be accurately measured.

2. Install the top limiting groove of the frameless glass door frame: two metal decorative plate edges are drawn from the center line of the spring, and then the installation of the top limiting groove of the door frame is carried out according to the edge.

3. Install the wooden bottom bracket of the metal veneer of the frameless glass door: nail the square wood on the original embedded wooden brick, or nail the square wood through the expansion bolts, fix the square wood on the ground, and then glue the metal veneer to the wooden square with universal glue.

4. Install the rigid door frame: nail the square wood of the door frame according to the center line of the spring, and then use plywood to determine the size and position of the door frame column.

5. Installation of the glass door leaf of the frameless glass door: use the glass suction cup device (or glass suction cup machine) to suck the thick glass tightly, and then hold the suction cup handle through 2 or 3 people to lift the thick glass plate and erect it and move it to the installation site to prepare for the position.

6. Glass fixation: nail two flat square strips of wood inside and outside on the bottom bracket to sandwich the thick glass in the middle, but leave a gap of about 4mm from the thick glass plate, and then paint the all-purpose glue on the flat square wood strip to glue the facing metal plate on the square wood and two flat square wood strips.

7. Injection of glass glue sealing: Inject glass glue into the gaps on both sides of the top root groove and the two sides of the bottom bracket glass notch, as well as the gap between the thick glass and the door frame column.

8. Docking between the glass of the frameless glass door: the thick glass plate of the fixed part, due to the excessive width and size, must be assembled with two or more pieces, and the two pieces are aligned and spliced to form a seam, and the distance between the butt joints should be left 2 3mm.

Introduction: Because of the good lighting and decoration of frameless glass doors, they are more and more favored by some owners. So how to install a frameless glass door? Let's go with me!

Frameless glass door installation – adjustment

The width of the limiting groove at the top of the installation glass partition wall and door should be greater than the thickness of the glass 2 4mm, and the depth of the groove should be between 20 and 30mm, so as to facilitate glue injection. The installation method can lead to two metal decorative plate edge lines from the center line of the spring, and then carry out the installation of the limit groove at the top of the door frame according to the edge line. The wooden backing plate inside the notch is adjusted to the depth of the groove.

Adjust by increasing or decreasing the number of pads.

Frameless Glass Door Installation – Install the vertical door frame

Nailing the square wood of the door frame according to the center line of the spring, and then using plywood to determine the fixation of the external size and position of the door frame post (note that the size of the decorative surface should be subtracted). Finally, the metal decorative surface is wrapped, and the seam of the decorative surface should be placed in the middle of the two sides of the installation glass. The seam position must be accurate and vertical.

Frameless Glass Door Installation – Glass Installation

Use a glass suction cup device (or glass suction cup machine) to suck the thick glass tightly, and then hold the suction cup handle through 2 or 3 people to lift the thick glass plate and erect it to the installation site and prepare it to be in place. In-place method: the upper part of the glass should be inserted into the limiting groove at the top of the door frame, and then the lower part of the glass is placed on the bottom support to align the center line, and the installation position of the door frame on both sides is good, so that the two sides of the thick glass just seal the metal veneer of the door frame seam, and the finish seam is required to be invisible inside and outside.

Frameless glass door installation – glass fixation

Nail two flat square strips of wood inside and outside on the bottom bracket to sandwich the thick glass in the middle, but leave a gap of about 4mm from the thick glass plate, and then apply all-purpose glue on the flat square wood strip to glue the facing metal plate to the square wood and two flat square wood strips.

We should know the general installation steps when installing frameless glass doors, and then follow the steps step by step. First of all, we determine the positioning line according to the design drawing to determine the position of the door frame, and then draw out two edges according to the center line to install the top groove of the door frame.

After installing the top groove to the floor bracket where the metal finish is installed, the next step is to fix the aluminum alloy square tube to the predetermined wooden bricks. After fixing, it's time to install the glass, it's not one person to install the glass, it takes at least 2 people to install it. In this case, the lower part of the glass is placed in the center of the bottom bracket and then the joint joints are integrated.

This is followed by the injection of glass glue into the relevant gaps. After installation, check it, and then use a rag to remove the glass glue from the glass.

Install the door leaf with ground springs, upper pivot seats, upper and lower door clamps, and ground locks.

There are several ways to fix the part:

1. Below the ground elevation and the upper part of the glass, use U-shaped steel as the base, inlay the cushion block and thick double-sided tape, after the glass installation is completed, the floor tile tile is closed, and the frame material is not visible;

2. The fixed part is fixed with stainless steel angle, and the metal angle is directly fixed to the concrete structure with an expansion pipe;

How to install a magnetic lock on a frameless glass door:

1. Use baiubk bracket to install.

Glass doors that don't have a wrapping frame require accessories to assist in the DAO installation. The installation method is basically the same as the surface installation method of the ordinary door, except that it is different when the iron plate is installed in the third step, as shown in Figure 9. Put the U-shaped groove together with the rubber cushion and stainless steel gasket (placed on the side of the lock screw) on the glass door, lock it on the glass door with headless hexagon socket screws, and then fix the relay iron plate on the U-shaped groove.

For different glass door thicknesses and different types of solenoid locks, we offer different types of mounting accessories: UBK brackets.

2. Use AB bracket to install.

Fix the AB frame on the glass door with glass glue (or double-sided tape), and then fix the iron plate to the bracket.

I see what kind of lock it is, and I install it by drilling holes with rhinestones in the glass door according to the lock position.