Why do some cars press the unlock button and the lights turn on?

Press the unlock button and the lights come on because the car's lights are set to automatic.

At this time, the lights are automatically light-controlled, with a built-in light-controlled switch, which automatically senses the on/off of the lights through the light-controlled switch.

When the light is low enough, just press the unlock button, and the lights will automatically turn on; When the light is strong enough, the lights turn off automatically.

Hello, the general vehicle after pressing the unlock button, the lights will spontaneously combust and turn on, this is the car, there is a kind of automatic light system, for example, the switch on our headlights is open, there is off, and there is an Alto piece, if you adjust to the Otto piece, then, when you unlock the car to open the coffin, the lights will naturally light up in the shade, and there is a kind of light, that is, the running lights, when you untie the coffin, the running lights will also be on, thank you, I hope to help you.

It's user-friendly, for example, when it's dark, or they have daytime running lights, and then the lights come on, and then you can see the road clearly.

The reason why some cars turn on the lights as soon as they unlock them is that the lights of the car are adjusted to automatic transmission, and the lights are automatically light-controlled, with built-in light control switches, which automatically induce the lights to turn on and off through the light control switches. When the light is low enough, just press the unlock button and the lights will automatically turn on, and when the light is strong enough, the lights will automatically turn off. The automatic headlights are installed for the convenience of the user, and the headlights are equipped with a light sensitivity control system, which is called automatic headlights, which is more practical when passing through tunnels.

There is a photoresistor in the headlight power supply line, when the external light is dark to a certain extent, it will be automatically turned on, and the light will be disconnected when it reaches a certain brightness, and the light system will be automatically turned on through the photosensor, and the lights will be lit because the lights of the car are adjusted to the automatic gear, at this time, the lights are automatically light-controlled, with a built-in light-controlled switch, and the lights are automatically sensed through the light-controlled switch. When the light is low enough, just press the unlock button, and the lights will automatically turn on; When the light is strong enough, the lights turn off automatically.

Why do some cars press the unlock button and the lights turn on? Uh, I feel like this is how this is set when their car is set up, so when you press the unlock button, the car will light up.

This is a normal phenomenon, pressing it is to energize the whole car, so it will light up.

If you can adjust it, you can go to the 4s point and adjust it with the car computer.

1. The setting method of auto-lighting of the car unlocking light is:

1. Adjust the light control to automatic gear;

2. Start the car remotely, press the unlock button, and the interior lights will automatically light up.

Second, the role of the car lamp is:

1. Turn on the turn signal to remind the tailgating vehicle to reduce the rear-end accident;

2. See the road conditions clearly and improve driving safety;

3. Tell the vehicle behind that it is braking and pay attention to slow down;

4. In emergencies such as temporary parking and bad weather with low visibility, turn on the double flash, which can inform the passing vehicles.

Maintenance method of car lamp headlights:

1. Check the lampshade frequently to avoid water droplets;

2. Replace the headlights regularly;

3. Adjust the height of the headlights;

4. High-quality bulbs should be used for headlamp replacement;

5. The headlights should be protected from being hit by foreign objects.

Door-controlled reading lights. If the door is not closed, the moon light will always be on.

2. Reading lights that are not controlled by the door.

Reading lights that are not controlled by the doors will generally have a separate switch. There are generally two buttons displayed on the switch, turn the switch to "on", and the reading light in the car will always be on no matter what state the car is in.

3. If there is a light timer installed in the car, the reading light in the car will automatically turn off after fifteen seconds of continuous on. If there is no light-mounted timer in the car.

The interior lighting of the car is a long fire line, so if your switch is in the ON gear, it will always be on, and there are three gears for the indoor ceiling light, the ceiling, etc., which is like this: one is neutral is to turn off the light; One is when the door is opened, and the light is turned off when the door is closed; The last one is the reading light, which is on as long as it is turned on. These functions have nothing to do with what you use to lock the cab, whether it is on or not is related to the position of the headliner light.

Although many models are now keyless entry, there are still drivers who will give the key to their partner, let him go farther, and then pull the door himself to see if it is locked. Checking locks is a good habit, but it doesn't have to be that troublesome. Many cars will have a prompt when they are locked, such as flashing the lights twice, the car"Tick tick"Two rings, and the door sounds"Click"sound, the rearview mirror folds in, etc.

Each car behaves differently after being locked, and you can judge from these aspects, so you don't have to pull the door repeatedly every time.

The hood didn't close properly. Or the doors are not closed.

The fact that the car is locked and the lights are still on is the reason why the car is equipped with a headlight delay shutdown function. The headlight delay shut-off function is very convenient for situations where there are no street lights.

Open the door next to the driver of the car and press the brake pedal of the car with your foot to prepare to start the engine. Then press the car's one-button start button, if the car's dashboard lights are all on, it means that the car's engine starts. Then press and hold the top of the toggle lever on the right side of the steering wheel of the car for more than 5 seconds to complete the match.

Precautions for the use of car lights.

Signal lights: include turn signals (double flashing) and brake lights. Proper use of signal lights is important for safe driving.

Turn signal: This light is turned on when the vehicle is turning, and it flashes intermittently to alert vehicles and pedestrians in front of and behind, left and right.

Nocturnal lights: commonly known as "headlights". The headlights are the "heart" of the whole car.

The rational use of headlights should be so that they become low beams when meeting cars, and turn back to high beams in time after meeting cars, so as to have a distant line of sight and make up for the unclear vision caused by meeting cars. When passing through intersections and overtaking, you should be prompted by changing the high and low beams.

If you are driving in the car and close the door, the center console light is still on, it may be because: 1 the door is not closed properly 2 you are driving the light.

If you are outside the car, it means that you turn off the car and lock the door, it is because: all cars turn off the door after the light is basically delayed, it is slowly turned off. It may be that in addition to the problem, it is recommended that the landlord go to the 4S store to do a detailed inspection.

It's better that way.

You won't turn off your lights until you get out of the main driver's seat.

In the past, older models, it is true that after the vehicle is turned off, it will only cut off the power supply of the equipment in the car, and will not automatically cut off the power supply of the lights, so as long as the owner does not turn it off, the lights will always be on, consuming the power of the battery. Often after a night, the battery power is all consumed by the car lights, and the indoor lights used in passenger cars are generally installed indoors. It is best to illuminate the entire interior evenly.

In addition, the light switch (SW) should be operated in both the front and rear seats. SW generally has three positions: on, off, and linkage with the door. In order to reduce the thickness of the lamp, 5 10W tubular bulbs are generally used.

Because the premise is that you have the key, almost all car owners will not go to manually turn off the central control themselves before pulling the key.

CD** or radio.

There is also air conditioning, but the headlights are different, first of all, it depends on where your headlight gear is, if it is a wide indicator light file, then it will be miserable, he will always be on, if there is a problem with the relay in the center console or there is a problem with the line, resulting in power supply after the flameout, the display will always be on. Generally, to judge whether the center console relay is faulty, you can buy a new relay to replace, if after the replacement, the center console returns to normal, it means that it is a problem with the center console relay.

If the car turns off at night, the car lights are still on, you can manually turn off the automatic lights, by turning the light switch to the closed position in the direction of off, and then turn more to turn off the automatic lights; The first is the normal Accompany Me Home function after the engine is turned off, and then turn off the lights for a while.

If the lights are still on, there may be a problem with the wiring, so it is recommended to go to a repair shop or a 4S shop to check. Flush the battery and you'll know. There are no electrical devices in the car, if there are a lot of them, there is a possibility that the battery will lose power.

The mileage is too short, or the air conditioner is often turned on, the headlights are often turned on, the electrical equipment is turned off before parking, and the accelerator is turned off after a few hits, and the first one is the throttle.

lights, it is possible that the throttle is dirty.

Nowadays, there are many new cars that will still keep the lights for a period of time after turning off and locking the car, and car enthusiasts call this function "accompany me home", which is the standard configuration of many new cars. This standard configuration usually takes no more than five minutes. It is also normal for the button light to be on all the time, which is a night parking light, which is used to indicate pedestrians or vehicles behind in an environment where there are no street lights.

It's because you haven't turned off the lights, so this happens, and you have to check if the lights in the car are off before you turn it off.

It may be because your car line is short-circuited and the line is aging, so this situation will occur.

Summary. Dear, hello, the unlocking light is not on, one is that the battery voltage is low, and the other is that the headlight is not in the automatic position. 1.

If the battery voltage is low to a certain extent, the headlights will not light up. 2.If the gear of the automatic headlight is not in the automatic position, it will not light up when it is unlocked.

Dear, hello, the unlocking light does not light up the finger, one is that the battery voltage is low, and the other is that the headlight is not in the automatic position. 1.If the battery voltage is low to a certain extent, it will cause the headlights to not light up.

2.If the gear of the automatic headlight is not set in the automatic position, it will not light up when unlocked.

Lock the car and unlock, press the remote control turn signal does not light up to indicate that the central lock does not work, generally the problem of opening the old and failing by the door; If the central lock can be locked but the light is not on, and the turn signal is on normally, it is a problem with the anti-theft computer shirt.

Summary. Hello, glad to answer for you. What happens when the lock button light is always on is as follows:

This is a normal phenomenon, because the car has an automatic lock, that is, the door will be automatically locked during the driving process, and the light on the lock button will always be on after locking.

Hello, Hehong is happy to answer for you. Lock the car and press the comma finger button light to shine as follows: this is a normal phenomenon, because the car has an automatic lock, that is to say, the door will be automatically locked during the driving process, and the light on the lock button will always be on after locking, this is no problem, and it can be used normally.

The car anti-theft Kaihao indicator flashes, which means that the vehicle anti-theft system is activated and is in working condition. Generally speaking, after pressing the lock button of the smart key, the car's anti-theft system will be activated, and then the anti-theft light will flash. Many wheel owners think that the anti-theft lights keep flashing because the car is not locked properly, or they are worried that this will consume the power on the car.

The car is not in a driving state, after locking the car, the yellow light of the other doors will be extinguished for a while, and the lock button light of the main driver will be on for a long time.

This is because your vehicle is equipped with the Auto light to go home with the Home function activated: turn off the morning or fire switch, operate the headlight flasher to light the headlights, and illuminate the user for a period of time. If the off-home function is not activated, you need to go to the maintenance facility as soon as possible to check and confirm the rough ants.

Summary. Hello, glad to answer for you.

The reason why the lock light is not on but the unlock is on:

The bonnet, doors, and trunk are not properly closed;

Open the engine compartment cover to check whether the rubber pier near the upper edge of the headlights on both sides is still there, and there is a sensor under the rubber pier, and the rubber pier must be pressed on the sensor to use normally.

The lock light is not on, but the unlock is on.

Hello, glad to answer for you.

The reason why the lock light is not on but the unlock is on:

The bonnet, doors, and trunk are not properly closed;

Open the engine compartment cover to check whether the rubber pier near the upper edge of the headlights on both sides is still there, and there is a sensor below the rubber pier.

Try it and see if it's because of these two reasons.

Summary. The button light is always on, which means that the system has not entered the state of turning off after locking the car. It is necessary to check the circuit controlled by the remote control receiving module, including the body control module, to see if there is any problem, and it is necessary to focus on these two aspects.

The button light keeps on after the car is turned off and locked, what is the problem?

Hello, I'm helping you sort out the answers to your questions, please wait a while The button light is always on, which means that the system has not entered the state of turning off after locking the car. It is necessary to check the circuit controlled by the remote control receiving module, including the body control module, to see if there is any problem, and it is necessary to focus on these two aspects.

What is the reason why the OFF button keeps on after the flame is turned off and the door is locked?

This is problematic, it is necessary to check the control module of this remote control, including this body control module, to see if there is a fault or a line, to see if there is a problem.