How do I distribute the speed of my computer evenly across the routers? Those who understand come in

It is recommended to use a router that can allocate network speed, and set it to start the IP bandwidth control mode in the router to allocate the network speed, so that everyone will not be affected, and other methods are more troublesome; Now routers with IP bandwidth control are also cheaper, and you can buy them for one or two hundred.

If you must use the existing network, and then through the existing router to access the Internet and control the network speed, to achieve the effect you said, there is also a way, that is, to use a computer as a server, this computer needs to install two network cards, and then install the corresponding network management software in the computer (there are related software and operation tutorials on the Internet), this server is directly connected to a network card interface model, another network card interface is connected to the router LAN port, and the router is set to turn off the DCHP function, This can be achieved by dialing the model Internet through this computer that is the server.

First of all, enter the router, the default username and password are admin, you had better change it, otherwise you use the router to limit the speed of others, and others will change it back for you as soon as they enter the router.

Just look at what model your router is, go to the Internet to check whether the router can limit the speed Now some routes have this function, and some don't.

If you can limit the speed, it's easy to do Find the broadband management item, enter the value here in the IP area, and it also depends on the model of your route).1—

It's best to set a small point in the back uplink, and the downlink (that is, the ** speed) is the network speed that you can divide them equally, see how many megabytes of network speed you have, divide it by the number of machines you have, and add a little more network speed, so that the network speed will not be wasted.

In addition, if you can't set the speed of the route, there are also P2P network enforcement officers, but it is recommended that you do not go down, not only does it occupy the network speed, but also if others use anti-P2P things, it is useless for you to limit it, and if you don't get it right, you will have to drop the connection, so changing a good route or negotiating with your colleagues is the best way.

Hello, I don't know if your router comes with broadband speed limiting. If there is a method, it is as follows:

1. Open the IE browser and enter the IP address of the router, generally if you don't know your routing IP address, start --run --enter cmd, and enter ipconfig in the dos window

You can find your own routing IP address

2. Find IP Broadband Control or Broadband Rate Limit in the left sidebar, and check IP Broadband Control.

This is only possible on routers with this feature (e.g. dlink l, etc.).

Here's how to do it:

1. Log in to the router management page. Enter Enter in the address bar of the browser to display the login page, and enter the default username admin and password admin to log in.

2. After logging in, click "Manual Settings" or "Advanced Settings" to enter the management page.

3. Click "Advanced" - Flow Control Settings, and the following interface will appear on the right:

4. After filling in, click "Save Settings", the router will prompt "Start Now", "Start Later", and click "Start Now".

Check whether your route has the bandwidth rate limiting feature.

1.Yes, not every router can assign speed to every computer. The routers used in Internet cafes are all high-speed intelligent management routers, and the performance of our ordinary SOHU small routers is too different from the management functions provided by Wang Chong, and it is also dozens of times worse.

2.Ordinary home routers also have the function of distributing network speed, such as TP-link, Tengda's, this is not good to say one by one, but the ability of these routers to allocate bandwidth is very weak, or rather, just to give you a bandwidth, can not be bandwidth to achieve the maximum utilization efficiency.

3.Ordinary switches cannot allocate network speed, which is determined by the characteristics of the switch, and the switch only provides the best function of data. Unless it is a layer 3 switch, but that kind of equipment, the minimum is more than 3000, I think the individual family is still unable to bear it.

If you don't understand anything, you can still ask.