Do you want to change the timing belt for the 13 Honda CRV2 4

Generally, 8-100,000 kilometers need to replace the timing belt.

The timing belt is an important part of the engine's valve system, passing through with the crankshaft.

and match a certain gear ratio.

to ensure the accuracy of intake and exhaust time. The belt is used instead of gears because the belt is quiet, has little variation and is easy to compensate. Obviously, the life of the belt is definitely shorter than that of metal gears, so it is necessary to replace the belt regularly.

Timing belts are generally considered to be replaced at 80,000 km. Even if you have a timing belt in your car, you can't replace it if it breaks. Therefore, when the total distance traveled reaches 80,000, it is recommended to consider replacing it.

Hello, no need to change it. Honda uses chains, and when it is 300,000 kilometers, the chain is replaced. 4S shop professional technician, 10 minutes to solve. 】

Hello, 13 Honda to replace the timing belt, it is recommended that you replace it for 60,000 kilometers to avoid aging and breakage. I hope it can help you and I wish you a pleasant ride. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

I'm glad to answer for you: The vehicle needs to replace the timing belt, which will be aged and worn, and it will lead to a relatively large failure of the engine, I hope mine can satisfy you, in order to encourage, I wish you happiness!

Hello Your car does not have a timing belt The timing is chain-driven, so you don't need to change I hope it can help you Hope I wish you a happy car [Car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello. The Honda CRV engine uses a timing chain, not a timing belt. Hope it can help you [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello. The old CRV is a belt, and the models produced in recent years, including your 13 CRV belts, are chained, as long as the oil is changed frequently to ensure that the lubrication is in place to reduce wear, it does not need to be replaced. But 200,000 need to be checked whether the tightening strength is enough, whether the wear is serious, not serious, can continue to be used, and if it is serious, the noise will become louder.

The specific operation steps of the 03 Honda timing chain alignment are as follows:

1. Put the intake camshaft.

The round hole is aligned with the mark of the cylinder block. Ming's.

2. The round hole of the exhaust camshaft should also be aligned with the mark.

3. The marks of the two timing teeth in front of the camshaft should be parallel.

4. The cylinder shaft mark of the exhaust reputation should be marked with the chain.

5. The intake camshaft mark should also be distorted and aligned.

6. Finally, the mark on the crankshaft is aligned.

The engine timing of the 16 Honda Sail is a timing chain drive, which is the chain that is not easily damaged, but it is recommended to replace it when it is loose after 130,000 kilometers. In the case of looseness, it means that the chain is stretched or there is a problem with the tensioner. This engine is particularly durable, does not burn oil, and is mainly serviced regularly.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello. I am your exclusive technician, attentive, careful, attentive to answer your questions, I hope this service can help you. The engine timing of the 16 Honda Sail is a timing chain drive, which is not easily damaged by the chain service strip, but it is recommended that it need to be replaced when it is loose after 130,000 kilometers of inspection.

In the case of looseness, it means that the chain is stretched or there is a problem with the tensioner. This engine is particularly durable, does not burn oil, and is mainly serviced regularly. I hope this service can help you, if the socks are helpful to you, look forward to your praise and attention.

The car master is here to help.

Thanks thanks, thanks. If you feel that it is helpful to you, please give a like after the question is over, and the platform will give you a coupon that you can use next time.

The specific operation steps of the 03 Honda timing chain alignment are as follows:

1. Align the round hole of the intake camshaft with the mark of the cylinder block.

2. The round hole of the exhaust camshaft should also be aligned with the mark.

3. The marks of the two timing teeth in front of the camshaft should be parallel.

4. The exhaust camshaft mark should be marked with the chain mark.

5. The intake camshaft mark should also be aligned.

6. Finally, the mark on the crankshaft is aligned.

First of all, the old cam, there are two about five holes on the signal board behind the cam, respectively, with two iron gangs of the same thickness to penetrate into the inside, while turning the cam you can see through the hole that there are the same holes, both are worn to see that the cam is basically aligned according to the chain part in the horizontal place with two horizontal posts. The mark on the curve below is obvious, remember to look at the color of the chain.

Note: There are marks inside, it should be the correction fluid, two close points to the corresponding point of the camshaft, another point in the crankshaft position, and the following eccentric shaft if there is a dismantling should also be right, two points of the dot of the eccentric shaft, one point of the crankshaft wheel.

The hair macro is good with the motive is a few chain socks at the right time. Blindfolded fingers.

The method of engine timing belt of Honda CRV car is as follows: the intake and exhaust camshaft is turned to a horizontal position, and the crankshaft pulley is fixed to the front cover to complete the engine timing of Honda CRV car.

The Honda CRV automobile engine timing belt system can better ensure the normal operation of the automobile engine and avoid excessive noise generated by the automobile timing system, which affects the riding experience of the car. However, the timing belt is made of Xuzen rubber, so the owner needs to carry out regular inspection and maintenance of the timing belt system of the Congsun engine in time.

As the engine operating time increases, the rubber timing belt of the car will wear out or deteriorate. Timing chains made of stronger, stronger steel can solve this problem, as the chain metal is stronger than rubber.

The 2014 Honda CR-V is a timing chain.

The function of the timing chain is mainly to drive the valve mechanism of the engine, so that the engine intake and exhaust valves open or close at the appropriate time, so the timing chain can ensure the normal suction and exhaust of the engine cylinder.

The reliability of the timing chain is very high, the timing chain is generally within 150,000 kilometers of silver banquet use is normal, theoretically speaking, the timing chain can be maintenance-free for life, in the actual use, the timing chain will also produce a certain amount of wear, especially when the silver car is full of load for a long time, the wear will also be aggravated, according to the use conditions and environment, regularly check the chaos, replace it if necessary.