How to walk the wires for the decoration of the new house, and how to walk the wires for home decora

If you simply use electricity, you can use this tube. The usage is as follows: pull the wire, and then let a person look at the other side, if the wire moves, it means that this one is through, you can tie the wire and the wire and then pull the wire at the other end to lead the wire out.

General lighting: square single-strand copper core wire, ordinary socket: square single-strand copper core wire, if there are high-power electrical appliances, you can use 4 square single-strand copper core wire.

If the socket and lamps are added, they need to be slotted, piped, and laid separately (for the wire specifications, they are consistent with the above).

1. The wire should go as high as possible to achieve "horizontal and vertical". The wires in the house should not be very low, but should be placed as high as possible, such as the highest corner, etc., so that the wires do not have to come into view. In addition, the wires should not be ripped out of order, but should be in a straight line, as far as possible to be "horizontal and vertical", so that it looks modern and neat and fashionable, and will not be offensive.

2. The color of the wall should be consistent with the color of the wires as much as possible. When routing wires, most people will choose the type with a few wires inside the white color wrapping, which will not give people a messy feeling, like an ornament. This kind of line is perfect if it is paired with white or creamy wall paint, it will not feel strange with little visual impact, but it can be integrated and look comfortable.

3. The wire is fixed firmly to avoid loosening and dragging. When wiring, you may wish to use cement nails and wires to fix special nails to ensure that the wires are stable and will not loosen, sag or even fall off. It is important to note that the distance between each nail should be consistent and not too dense, and it can be decided autonomously according to one's visual perception.

4. Use some creative tricks in a timely and appropriate amount. It can be found that creativity comes from people's lives, when there are places that have to use dense or relatively low lines, you can change the lines into various patterns such as patterns and animal types as needed, so as to increase the observability and add a lot of style.

5. Avoid using mobile plug strips at the end of the wire. This is very important, many people in order to save trouble, some electrical plugs are not long enough, in order to take into account a number of electrical appliances often the terminal is not fixed, but with a movable socket, which will greatly reduce the overall aesthetics, but also unsafe, it is recommended that the terminal should be set up as a standard fixed socket or socket.

How to walk the home improvement wire:

1. Positioning: First of all, we must locate the circuit according to your use of electricity, for example, where to switch, where to reduce, where to reduce, where to light, etc., the electrician will locate according to your requirements.

2. Slotting: After the positioning is completed, the electrician will open the wiring groove according to the positioning and circuit direction, and the wiring groove should be horizontal and vertical. However, the standard practice is not allowed to open the horizontal groove, because it will affect the bearing capacity of the wall.

Three: wiring: wiring generally adopts the way of buried wire pipe. There are two kinds of wire pipes: cold-bent pipe and PVC pipe, cold-bent pipe can be bent without breaking, which is the best choice for wiring, because its corner is curved, and the line can be replaced at any time without opening the wall.

Fourth, the elbow: the cold bending pipe should use a bending tool, and the arc should be 10 times the diameter of the line pipe, so that the threading or removal can be smooth.

Principles to be followed in wiring:

1) The distance between strong and weak electricity should be 30---50 cm, they can only be distant neighbors, not close relatives, I don't know when, they will visit the door, disturb your TV and**.

2) Strong and weak electricity cannot be worn in the same tube.

3) The total cross-sectional area of the wire in the pipe should be less than 40% of the cross-sectional area of the protective pipe, such as 20 pipes with up to 4 square wires, 4): the whole pipe should be used as much as possible for long-distance line pipes, 5): if the line pipe needs to be connected, joints should be used, and joints and pipes should be glued well.

6): If there is a line pipe on the ground, it should be protected immediately to prevent stepping on cracks and affecting future maintenance.

7): When the wiring length is more than 15 meters or there are 3 bends in the middle, a junction box should be installed in the middle, because when disassembling and assembling the wire, it is too long or bent more, and the wire cannot pass from the conduit.

8.Under normal circumstances, the installation of air conditioning sockets should be more than 2 meters above the ground, and the wires and lines should be more than 40 cm away from the gas pipeline.

9): Under normal circumstances, the installation of air conditioning sockets should be more than 2 meters above the ground, and in general, the installation of air conditioning sockets should be more than 2 meters above the ground.

10): Under the premise of no special requirements, the socket installation should be 30 cm above the ground.

11): The switch and socket face the panel, and the switch and socket should face the panel on the left side of the neutral line and the right side of the live wire, and the right side of the center line should be the live wire.

12): In home decoration, wires can only be connected side by side, which is definitely not as simple as we usually connect casually.

13): The joint adopts the press wiring method, which must be strong and firm.

14): The connected wire should be wrapped with insulating tape immediately.

15): If the color of the live wire, the neutral line, and the ground wire is determined, then at any time, the color can not be mixed, or there will be a good look.

16) Lighting, sockets, air conditioners, water heaters and other circuits in different areas of the home should be grouped separately, once which part needs to be cut off for maintenance, it will not affect the normal use of other electrical appliances.

17): After the circuit is done, be sure to ask the construction party to make a circuit layout diagram for you, once you have to overhaul or repair the wall or nail on the wall in the future to prevent the wires from being damaged.

Wire is a necessary material in every family, and the laying of wires is also a concealed project.

The first operation: grooving.

The elastic line is slotted, and the horizontal and vertical are emphasized. The depth of the groove is generally times that of the embedded conduit.

In this link, it is important to pay attention to the wire box and switch position

1. The position of the wire box (socket) is generally 300mm from the ground, and the height of the socket is at the same level;

2. The height of the switch position is 1300mm.

The second process: wire box (bottom box) embedding.

After the slotting is done, the master has to do the wire box pre-embedded.

There are four points to focus on in this process:

1. Levelness: the wire box should be neat and uniform, and keep it level;

2. Flatness: the wire box and the wall should be kept flat;

3. Spacing: A certain distance should be maintained between the wire box and the wire box, and the wire box with strong electric weakness should be 150mm;

4. Lock: There should be a lock connection between the wire box and the wire pipe to play a fixed role.

The third process: the laying of the conduit.

There are several points that we can pay attention to in the laying of conduits:

1. Joints should be used for the connection between the line pipe and the line pipe;

2. When necessary, it needs to be fixed with copper wire;

3. The curvature is smooth and there is no folding angle.

Often many friends do not follow this order, after slotting directly to lay the wire pipe, in fact, this is not standardized, there are a lot of electricians in order to deal with you say what is the wire box (bottom box) behind the installation is the same, in fact, there is no way to ensure that the height of the wire box (bottom box) is on a horizontal line, after the installation of the wire box (bottom box) on the lock buckle is no way to go in, even if it goes up is a fake lock, can not play the role of the lock, just a decoration.

**Lines, network cables, cable TV lines and audio cables are called weak wires, and the laying of strong and weak currents needs to pay attention to the following four points:

1. The strong and weak electricity is laid in parallel 200mm, otherwise there will be interference, and there will be snowflakes on the TV, and there will be noise;

2. If the strong and weak electricity is cross-laid, anti-interference measures must be taken (separated by tin-platinum, which is also for anti-interference);

3. Prohibition and management (this must be strictly prohibited);

4. The distance between the strong and weak points of the socket is 150mm;

5. Each functional electricity needs a separate circuit, and more than 6 channels are used in general households;

Special line for air conditioning (there are several air conditioners in several ways).

1 way of kitchen wire (it is recommended to open one more way if there is a refrigerator).

Bathroom wire 1 (there is a bath bomb need to open another road).

1 line for general lighting.

1 way of wire for ordinary sockets.

Alternate all the way. 6. Wire color separation, 3 wires in the same line of pipe 7) Separate circuits for different functions, and the exposed wire is not less than 150mm.

Home improvement power cord is generally a room (air conditioning one road, socket light line one road), two roads, you have a few rooms on a few routes, these lines are to the distribution box directly over, bathroom and kitchen also need two routes. The vertical air conditioner uses 4 square lines, and the rest has square lines and square lines for lamp lines.

Generally do protection go underground.

1. The current structure houses are mostly reinforced concrete, and the line pipe used in modern times is not the previous metal line pipe, the load-bearing force is limited, and the slotting on the wall is easy to damage the steel structure and cause cracking.

2. In addition, the slotting of reinforced concrete walls is laborious and laborious. Nowadays, the process is generally on the ground, and many of them are directly installed with open pipes and then covered (such as laying cement and laying floors).

3. According to the current quality requirements, the distance of the line is as short as possible and easy to twitch, so that it can be overhauled and replaced in the future. And walking on the wall must go around in circles. The fee line is also stuck.

Yuezhen wire manufacturers answer.

1. The distance between the strong and weak points of the socket is 150mm;

2. Prohibition and management (this must be strictly prohibited);

3. If the strong and weak current is cross-laid, anti-interference measures must be taken (separated by tin-platinum, which is also for anti-interference);

4. The strong and weak electricity is laid in parallel 200mm, otherwise there will be interference, resulting in snowflakes and noises on the TV;

5. Each functional electricity needs a separate circuit, and more than 6 channels are used in general households;

Observe the copper core of the wire, the gloss is good, the yellow is reddish is high-quality copper, and the yellow white and shiny is brass, low-quality copper. Hydropower engineering is a very important part of home renovation. The necessary factor for the quality assurance of hydropower projects is that the quality of materials must be passed.

Generally speaking, if the semi-package is repaired, the wires, waterproofing and other materials are purchased by the foreman or the decoration company, but as the owner, at least you must know how to judge the quality of the materials. In addition to wires, decoration and electricity-related need to purchase air switches, circuit breakers, strong current boxes, switch sockets, ceiling lights, etc. Under the same brand model, the soft wire is twice that of the hard wire....

In the process of everyone's decoration, often Bi Hui fiber will scratch his head, I don't know how to go with the house decoration wires, and I don't know where to start, the following is the detailed house decoration wires how to go.

1.The corridor must have two routes:

Lighting wires of wires. Maintain 1-2 power terminal interfaces. How to make the wiring decoration of the house can choose the light according to the area and length of the corridor.

2.The wiring of the room should generally be 8 routes:

Lighting cable (copper wire square mm) (copper wire square mm), air conditioning wire (copper wire 4 square mm), cable: how to go about the house decoration wire specific solutions: TV (feeder), ** wire (cable sheath 4 wires), computer cable (double branch of 5 types of wire), line inside or ring (cover wire optional 4 wires, core components 2), alarm line (refers to smoke, infrared alarm wire, 8-wire cable cover).

3.There are three routes that must be taken by a restaurant in a wired restaurant:

How to go with the house decoration wires: power lines, lighting lines, air conditioning lines. The power cord is reserved for 2-3 wiring ports. The lighting consists of warm light, and air conditioning must be reserved for the interface.

4.The room generally takes 7 routes:

Power cord, lighting cable, air conditioning cable, TV, ** cable, network cable, alarm cable.

How to go for house decoration wires, how to wire home decoration, the terminals of each line in the bedroom are retained: the power lines are kept on the bedside table, and the 5-hole terminal blocks are used with switches, which can reduce the problem of not turning on the bedside lamp, and should also keep the **wire mouth, if it is a double-ended cabinet and the power cord and ** wire must be yellow card warning in both bedside tables.

5.Circuit Design Restaurant:Includes power cord, lighting cord, cord air conditioner and TV.

Power cords must have a maximum of 2 or 3 power cords. How to go with the house decoration wires, how to make the house decoration wires, it is best to illuminate with a warm light source and choose the switch inside the door. The air conditioner also needs to be connected according to professional requirements.

In addition, it is better to eat TV in a restaurant and watch the news while eating.

6.Circuit design bath: Bath wiring should be 5:

I'm sure everyone has understood the steps of how to go with house renovation wires, which can greatly reduce the short circuit of household wires. However, it is necessary to remind everyone that this method works well when the left end of the thread is long enough. Not applicable if it is too short.

You can get it for free

In our interior decoration, hydropower renovation is a very important part, if the hydropower renovation is not done well, it will have a certain impact on our normal life in the future, so how to go home improvement wires, the following article will introduce it to you.

At present, the home improvement wires are all from the ground, and they are all horizontal and vertical, and diagonal lines are not allowed. Because the distance between the wires and the ground is relatively short, and the maintenance of the circuit is relatively convenient, the wires can be pulled out directly. At the same time, the width of the home improvement wire in the groove should be based on the width of the wire pipe, and the thickness should be left about 1cm gap after the wire pipe is put in, so as to ensure the safety of the wire and the stability of the difference.

Advantages of wires going to the ground.

1. The wire goes to the ground, and the wiring is relatively convenient, and it is easy to realize the active wire.

2. The wire walking on the ground will not cause too much damage to the indoor wall, which can reduce the possibility of cracking the wall to a certain extent.

3. The wire walking on the ground will not affect the installation of other items on the wall.

The disadvantages of wires going to the ground.

1. After the wiring is completed, the later decoration construction needs to pay attention to the protection of the line to avoid problems caused by construction.

2. When the wire crosses the ground, the thickness of the ground may be increased.

3. When the wire goes to the ground, if it is not an active wire, there is a problem with the circuit and it needs to be repaired, it is easy to cause damage to the ground, and it is relatively troublesome to repair.

What are the precautions for home improvement wiring.

1. Before wiring, it is necessary to determine the amount of wires and port specifications according to the total amount of household appliances and the subsequent addition of household appliances, such as refrigerators, microwave ovens, air conditioners and other high-power electrical appliances It is best to use a separate line.

2. When we wiring the bathroom, kitchen and other spaces, it is best to wire the roof along the wall, because the functionality of the kitchen and bathroom space is relatively strong, and the ground waterproof requirements are high.

The above is the relevant introduction to how to go with home improvement wires, I hope to provide you with some help in the layout of indoor wires, I hope you can have a safe and beautiful indoor space.