What happens to the 6s automatic shutdown What to do if the 6s has 30 batteries and automatically sh

1. When the iphone6 battery is exhausted, it is generally around 2%, if we are still using some high-power applications at this time, such as taking pictures and playing games, it will automatically shut down.

2. Since there is no power and it will automatically shut down, the solution is very simple, that is, let the iPhone connect to the charger, charge it and turn it on.

3. Misoperation of the keys There are physical buttons on the iPhone, and the home button and the power button are the ones that we usually use the most. If these two buttons are used separately, they have their own independent functions. If these two buttons are combined, the function of forcibly shutting down the iPhone will be achieved.

Once you press the Home & Power buttons at the same time and hold them for a few seconds, your iPhone will be forced to shut down and cut off power. If the shutdown is caused by misoperation, we only need to press the power button again to turn it on.

4. Unexpected situations In addition to the above-mentioned situations that will cause the iPhone to shut down, the next biggest possibility is that the iPhone6 mobile phone is liquid. If the iPhone is flooded, resulting in a short circuit in the internal circuit, there will also be an automatic shutdown, if you belong to this kind of situation, then the best way is to send the iPhone to your local Apple authorized after-sales repair station, let them do a specific test, and then give a solution.

Take your phone to the hand warmer and play with it

Thirty percent of the mobile phone is turned off, there are the following reasons and methods.

1. If there is no power, turn it off directly, connect to the original standard charger and charge it for more than half an hour.

2. It is not a problem with the battery, the temperature of the lithium-ion battery itself will stop working when the temperature is lower than 8 degrees Celsius in winter, to protect and prevent the precipitation of lithium-ion electrons, and this will not happen when the temperature is high in summer, so don't think that there is a problem with the mobile phone, try to charge it in a place where the temperature is suitable.

3. The battery level of the mobile phone is not accurate, it is recommended to replace it with a new battery to try.

4. If there is a problem with the motherboard of the mobile phone, it is recommended to go to the outlet to the engineer for inspection and maintenance.

30% of the battery will automatically shut down, at this time a few percent is just virtual power, which is the battery power loss caused by insufficient battery life.

This happens because the user performs the following wrong action:

1.Users often operate their phones while they are charging;

2.Use a non-original data cable for charging;

3.Charge only when the power is empty for a long time;

4.Charge with a power bank frequently.

According to the above reasons, the user should eliminate them one by one and solve them one by one, so as not to cause fatal damage to the battery again.

Reason: 1. Mobile phone battery.

Pool virtual electricity; 2. The reason for the cold weather;

3. The network signal is unstable, and the mobile phone automatically answers to increase the power to connect to the network signal;

4. There is rogue background software that has been running and consuming power;

5. The current mobile phone version consumes too much power.

How to maintain the battery:

1. Do not expose the mobile phone to the scorching heat or cold for charging;

2. Try not to use the mobile phone when the mobile phone is charging, and it should be best that every application on the mobile phone is closed when the mobile phone is recycled;

3. Don't cut off the power supply of the charger immediately after charging, it is best to give the battery a period of time to replenish the battery, and the battery can be used only after it is fully charged;

4. When the mobile phone is played to the point of being hot, remember not to use the mobile phone again, otherwise the mobile phone battery will exceed its own load and speed up the service life of the battery.

The mobile phone will be turned off at 30/100, and there are the following reasons and methods bai1 has no power, directly turn off the du machine, and connect to the original standard charging.

Zhi device charges for half an hour to dao on. 2. If there is a conflict between the third-party software and the system, restore the systemSome users resolved the issue by selecting Settings > General > Reset> ResetAllSettings.

The user will need to re-enter the password, change the wallpaper, and reset the touchid, but the user's data will not be deleted. 3. The battery level of the mobile phone is not accurate, it is recommended to replace it with a new battery to try. 4. If there is a problem with the motherboard of the mobile phone, it is recommended to go to the outlet to the engineer for inspection and maintenance.

The phone is turned off when it has 20% of the battery, which is because the phone's battery is virtual.

1.Virtual power means that the battery has always been in a semi-active state that is semi-charged, a simple understanding of the battery's display power display is very high, the actual is relatively low, not the real power of the battery, the battery is charged for a short time and there is a lot of or full power, but it is quickly used up.

2.For such a battery, it must be trickled up when in use, and you can wait for more than half an hour to pull it out after it is fully charged, if it still doesn't work, replace the mobile phone battery.

The battery is not durable, or there is a problem with the software, it is recommended to go to the after-sales service for maintenance.

1. With the growth of use time, even the loss of lithium battery will gradually increase, and this loss is irreversible, and the result is that the battery is more and more uncharged or full and the use time is shortened;

2. If it is a new machine, it is the system reason, not the hardware problem.

Go to the Apple store to flash the machine;

Connect to a computer to update the latest system;

Wait for Apple to fix the system bugs.

Note] Flash, operate with caution, and back up important data.

Reasons such as du

Under; Cold weather affects lithium

The battery level is DAO, and the indoor temperature is high, and the power of the mobile phone will be restored. The software system answers questions, causing a display block.

There is a bug in the iPhone itself.

There is a problem with the battery, the battery is used for too long or often out of a humid environment, causing some damage to the battery.

There is a problem with the mobile phone line, which causes the mobile phone to be in poor contact and automatically shut down.

Solution; In the case that the temperature affects the lithium battery, it can be solved by waiting for the mobile phone to warm up in a high-temperature environment.

2.Bring the charger to find the power source to charge.

3.If there is a system problem with the mobile phone itself, there is a vulnerability, shut down, and upgrade the system.

4.If there is a problem with the phone's own wiring or battery, mind taking it to after-sales service.

The possible causes are as follows:

1.This condition may be caused by a large temperature difference between indoor and outdoor;

2.If this is always the case, there must be a problem with the battery, and the electrochemical reaction inside is unstable, so it is recommended to replace the battery;

The reasons for this problem could be:

2.Charge with a non-original data cable;

3.Charge only when the long-term power is empty;

4.Charge with a power bank frequently.

Caused by cold weather, now 6s 6sp can go to customer service to change the electromagnetic for free! ~

If the weather is cold, you can consider replacing the battery.