Problems with Telecom Cat HG526 V2

You open the web page.

Log in with the account password, user name: telecomadmin password: ne7ja%5m (note: the password may be different depending on the model) to open the network - broadband settings.

Establish a new connection, carry the service Internet (enabled), the mode route (PPPoe), use NAT, enter your account and password to access the Internet, and confirm.

Hope it helps you and have a great day!

1.If your broadband can be used normally, it is recommended that you do not change the parameters of the Internet device at will, and do not try to hack the device.

2.If you want to use WiFi, you can call the customer service staff to arrange for the staff to set up the routing function for you.

3.You can also buy a wireless router to install and use, and the wireless effect is better.

4.In the current situation, please call customer service and arrange for the staff to handle it for you.

I've also encountered this situation.,The best thing to do is to revert to the original hg526 configuration file.,I'm looking for a backup to restore it.。

If you have a manual, let's do it yourself.

Enter the telecom login interface to indicate that the setting address of the router conflicts with the telecom modem used at home, and the setting interface of the telecom modem is preferred.

Solution: 1. Don't pick up the cat when setting up the router, and then pick up the cat after setting it up.

Plug in the wireless router, don't pick up the cat first, connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (on the label behind the router), and enter the settings page to set it.

2. Change the IP address of the LAN port of the router.

You can change the IP address of the router LAN port to change it so that when you set up the router, you will not enter the Telecom modem settings page.

Error 651 recommends that you handle it as follows.

Problem: The remote computer is not answering.

Solution: First of all, please check whether the modem signal light is normal: 1) When the modem signal light is normal, turn off the modem for 5 minutes and then restart it again; If restarting the modem does not work, we recommend that you uninstall the NIC driver and reinstall the keykey and dial-up software.

2) When the modem signal light is abnormal, power off the modem first, and check whether the network cable between the modem to the computer network card and the modem to the splitter is connected. 3) If the dialing error 651 still prompts after the above processing, please call the Anhui Telecom customer service hail line 10000+4+1.

At present, you can buy **iphone mobile phone, iphone5s in the telecom online business hall

iPhone 5S (16G) Touch ID Fingerprint Source Mask Brother Sensor New A7 chip with 64-bit architecture Better iSight camera and ultra-fast Wi-Fi Released Get 5 big gifts.

Hope mine can get yours.