How to calculate the paint used for the paint of the iron gate What kind of paint is used for the pa

Calculated by area. I hope my answer can help you.

<> "Paint with Iron. Because iron paint usually refers to the anti-rust paint and fluorocarbon paint sprayed on the surface of iron, it is divided into two ways: spray and direct brushing, and the paint can be brushed directly with a brush, but the spray is different, there are three kinds of spraying, electrostatic spraying and magnetic spraying. The surface of iron is coated with anti-rust paint and is not easy to fall off.

For people who like to install wrought iron gates, they are very concerned about the paint on the gate, but for people who have not been in contact with it, there are many questions about it, what kind of paint is used for the iron gate painting?

1. What kind of paint is used for the spray painting of the iron gate

<> "Paint with Iron. Because iron paint usually refers to the anti-rust paint and fluorocarbon paint sprayed on the surface of iron, it is divided into two ways: spray and direct brushing, and the paint can be brushed directly with a brush, but the spray is different, there are three kinds of spraying, electrostatic spraying and magnetic spraying. The surface of iron is coated with anti-rust paint and is not easy to fall off.

Second, what should be paid attention to in the painting of wrought iron gates

1. Paints cannot be mixed

The painting project of the wrought iron gate can not mix and prepare different kinds of chemical characteristic paints, and it is better to use some same diluent.

2. The viscosity is suitable

The paint on the wrought iron gate must be stirred evenly and adjusted to the appropriate viscosity before use.

3. The mixing ratio should be strict

The use of multi-component paints should be evenly mixed according to the proportion specified in the instruction manual before use.

4. The paint should be filtered

If the paint surface is crusty or rough and granular, use filtration measures to avoid uneven coating film or clogging of the spray gun.

5. Reapply after drying

Each coat should not be too thick, and a second coat should be applied in a completely dry state to prevent wrinkling. The aesthetic effect of the wrought iron gate is closely related to the construction of the paint, and the construction effect of the paint will directly affect the appearance of the wrought iron gate, so we should pay special attention to the construction of the wrought iron gate paint to ensure that the paint of the wrought iron gate can be completed smoothly.

The gate is the top priority of a family, and in some villa areas or self-built homes, iron doors will be used as their own gates. Although the iron door is good, it will rust and peel off the paint over time. Therefore, many families will paint the iron door every once in a while, just to keep the iron door in a good appearance.

Recently, a reader asked if he could paint the iron door at home, and what were the skills of painting. Okay, today I'm going to explain to you some tips for painting the iron door at home.

In fact, painting the iron door can be operated by yourself, or it can be handed over to a professional master to operate. If you are doing it yourself, you must be familiar with the relevant operation steps first, and you can't blindly start construction without doing any strategy.

1. Rust removal. Before painting the iron door, we need to go through a very strict and critical step, which is to remove the rust from the door. And there are many ways to remove rust, which should be decided according to the process of your own iron door and the area of rust.

We can first prepare a steel wool ball or sandpaper and a small shovel, first use the shovel to scrape off the rust on the surface of the iron door, and then use the steel wool ball or sandpaper to deal with the remaining rust marks. If there is a rust remover, then we can use the rust remover to operate this sale, so that we can get twice the result with half the effort.

2. Dry. Before painting, we also need to prepare the external environmental conditions. So we need to look at the recent weather forecast and not choose the rainy weather.

Because the iron door should be kept dry before painting, if there are water stains, you should wait for the water stains to dry before you can start.

3. Reconciliation. Pour the purchased paint into a small bucket and mix it with a small cup of gasoline. In this way, it can not only maintain the smoothness of the paint, but also make it particularly convenient to quietly change when painting.

Fourth, the painting process.

Generally speaking, the door opens to the right, so we need to brush the left hinge part first. This way, you won't get paint on your hands when you open and close the door. Because the paint will flow down with gravity, we need to brush the top and then the bottom to maintain the uniformity of the paint.

The above is to share some tips about the iron door painting, have you learned?

You can choose epoxy zinc-rich primer, epoxy micaceous iron intermediate paint, various colors of aliphatic acrylic polyurethane topcoat or fluorocarbon topcoat, which has good weather resistance. Iron doors are generally used in semi-outdoor or outdoor, easy to be exposed to the sun and rain, iron door paint as far as possible to choose good weather resistance, long life.

The general iron door material is made of stainless steel plate. The anti-theft effect of the iron door made of stainless steel is more obvious, and the stainless steel material is also very durable. The stainless steel door is painted and deformed, which solves the problem of its monotony.

If you want to get the effect, the general paint on the market can have a good effect, it is recommended to use car paint, that is, fluorocarbon paint, of course, the latter ** is much higher.

The iron gate of the yard is exposed to the sun and rain all year round, and it is best to use good paint for a long time, such as outdoor acrylic paint, fluorocarbon paint is better, and it is not much to be high.

Steel epoxy paint, or fluorocarbon paint.

As a fluorocarbon paint, its advantages (1) excellent anti-corrosion performance - thanks to excellent chemical inertness, the paint film is resistant to acids, alkalis, salts and other chemicals and a variety of chemical solvents, providing a protective barrier for the substrate; The film is tough - high surface hardness, impact resistance, buckling resistance, and good wear resistance. Shows excellent physical and mechanical properties. (2) Maintenance-free, self-cleaning - fluorocarbon coating has a very low surface energy, surface dust can be self-cleaned by rainwater, excellent hydrophobicity (maximum water absorption rate is less than 5%) and oil repellency, very small friction coefficient (- will not stick to dust and scale, good antifouling.

3) Strong adhesion - it has excellent adhesion on the surface of copper, stainless steel and other metals, polyester, polyurethane, vinyl chloride and other plastics, cement, composite materials, etc., and basically shows the characteristics of being suitable for adhesion to any material. High decoration - in a 60-degree gloss meter, it can achieve more than 80% high gloss. (4) Ultra-long weather resistance - the coating contains a large number of F-C bonds, which determines its super stability, no powdering, no fading, and a service life of up to 20 years, which has better performance than any other type of coating.

Excellent workability - two-component packaging, long storage life, easy application. Recommend 3A environmentally friendly fluorocarbon paint.

Wuxi Juxinyuan Business **** is good, is a company specializing in high-quality anticorrosive paint sales services. The company aims to provide a full range of services for the majority of users, including recommending reasonable paint matching solutions to you in the design stage, providing high-quality products and perfect on-site construction technical guidance and high-quality after-sales service in the cooperation. Listening carefully to customers' opinions and providing customers with satisfactory products and high-quality construction and service is a rare goal of our company.

The company's main business involves the power industry, bridges, pipelines, petrochemical oil depot storage tanks, machinery manufacturing equipment, port machinery, ships and other anti-corrosion fields. At present, our company is based on the Yangtze River Delta market, and has now obtained an example of successful cooperation.

The door is well painted, the construction is fast, the flatness is good, and there is no poor texture.

The difference between painting and painting:

1. Painting: The painting machine is more expensive, and the general painter is not equipped. The advantages of spray painting are:

The construction is fast, the flatness is good, and there is no poor texture. The disadvantages of painting are: large paint loss, post-maintenance trouble, because in the later maintenance, workers can no longer pull the painted machine to repair, can only be brushed with a brush, brushed out and sprayed out of the texture is definitely different.

2. Painting: the construction is relatively slow. However, the paint surface has a rolling texture and pattern, which is easy to maintain.

The disadvantages of painting are: the effect of large-surface roller coating is different from the whiskering in the yin corner and the lamp trough, and there is a difference in texture. At present, a number of paint companies promise to spray paint for the owners free of charge, but they are basically not responsible for the base treatment, and the base treatment of latex paint is the most important, because the base layer problem directly reduces the final decorative effect of latex paint.

In addition, the loss of lacquer is relatively large, so it is not particularly affordable.