What should I do if the car battery loses power and can t catch fire?

1.Cart start: This method is only suitable for manual transmission cars, the battery should preferably have some charge, and the terrain is qualified. If there are no passengers, try to get a pedestrian to help.

First hang up the first gear, step on the clutch, open the car key to the ACC gear, and then push the car behind, when the speed of the car comes up, you can release the clutch, the car will be due to inertia, can be ignited successfully.

2.Borrowing electricity: If there is no emergency starting power supply, in fact, few car owners will carry this kind of thing with the car, so you can first ask for help from surrounding car owners and apply for electricity.

It is necessary to prepare two battery lines, the first step, you need to put the two cars together as much as possible, generally speaking, the car battery is under the front hood, then the actual operation depends on the implementation of the situation, either the two cars side by side, or head to head.

In this case, you need to contact the maintenance master to replace the car battery. In this way, it is possible to set the car on fire.

Many people in life often encounter various problems in the process of using a car after buying a car. And in the face of a variety of problems, they need to be solved through appropriate methods. This is the only way to get the car moving. <>

1. Contact the maintenance master to replace the car battery.

When the car battery is out of power, the car cannot be ignited. Therefore, in this case, the driver needs to contact the repairman and ask the repairman to replace the battery of his car. In this way, you can set your car on fire.

And you can also keep your car in a normal driving state. Moreover, this method is also the choice made by most drivers when they encounter battery power loss. <>

2. Charge the battery.

In addition to choosing to contact the maintenance master to replace the battery. The driver also has the option to charge the battery, which in this way allows the battery to alleviate the state of power loss. When the battery level reaches a certain level, the battery can be re-installed in the car, and in this way the car can also be re-ignited.

Moreover, it can also make the car in the process of driving, and the battery will not lose power in the process of driving for a short time. <>

3. My personal opinion.

I feel that as a driver, I should have my vehicle inspected regularly. And you also need to maintain your vehicle regularly, because in these ways, you can find out the problems of the vehicle in the first place. And according to the actual situation of these problems in a timely manner, make relative improvements and maintenance.

In this way, you can make yourself in the process of driving the vehicle, there will be no frequent quality problems. So that you can have better safety while driving. So as to make yourself more at ease in the process of driving.

There may be two reasons for the battery to be dead, one is that the life of the battery is expiring or there is a problem, and the other is that the headlights are forgotten to turn off and the other is a loss of power.

It can be activated in one of three ways:

1. Pulled and towed by other vehicles; 2. Borrow the power supply of other vehicles to start; 3. Use downhill to start.

The method of using the battery to connect the wire, borrowing the power supply of other vehicles to charge, the specific method is: prepare two relatively thick wires, if it is purchased in the market, it is generally divided into red and black. One end of the red wire can be connected to the positive pole of the tram battery, and the other end can be connected to the positive pole of the tram battery.

One end of the black wire is connected to the negative pole of the battery of the tram, and the other end is connected to the metal part of the tram. A tram starts first to drive the tram to land. Here we also want to emphasize that the power supply car should be in a running state, first lapping the positive electrode, and then lapping the negative electrode; After starting, first loosen the negative electrode, and then loosen the positive electrode.

This can prevent the negative pole from accidentally touching the positive pole with the car body halfway after connecting the negative electrode first, resulting in a short circuit. "

At this time, you can use the cart to carry out emergency starting, or you can borrow the car wiring to complete the bridge start, and you can charge with the help of a mobile power supply. You can call the trailer directly**.

At this time, you can use an emergency power bank to start the car, or you can find a car to wire and ignite, so that the car can be ignited.

Don't worry, you can choose emergency start, you can also use the car wiring bridge to start, or use some power bank to start the relevant start. If it really doesn't work, call a trailer.

You can go to the cart and charge it immediately with a power bank. You can also find someone else to pick up a wire. This is a good way to get a fire.

Lap the power with a lap cable. First of all, prepare the lap cable and auxiliary starting battery, and pay attention to ensure that the auxiliary starting battery is also 12V specification before taking the power.

Then use the red wire to connect the positive pole to the positive pole, and then the black wire to connect the negative pole to the negative pole, and connect the jumper, be careful not to connect the positive and negative poles of the reverse cable, otherwise it will burn the original electrical equipment of the vehicle.

Finally, start the engine of the auxiliary starting vehicle, and ensure the power supply with the medium-speed operation ** motor, and then start the electric vehicle. Once the vehicle is started, disconnect the cables in exactly the opposite order (disconnect the negative wire first, then remove the positive wire).

The car battery is not charged, it does not catch fire and is not scrapped, you just need to charge it and continue to use it. If you have an emergency charger in your car, then you just need to follow the correct steps to charge it with an emergency charger and you're good to go. If your vehicle is manually transmitted, then you can also call in a group of people to help you push the vehicle, and the vehicle can be ignited after pushing.

Or you can just call the maintenance staff and ask them to charge your vehicle.

Use a charger

The kind of temporary charger is very easy to use, it is very small and lightweight. You just need to follow his instructions to connect it to the car's battery and you can charge the battery. It only takes about 5 to 10 minutes to charge and you can successfully set the car on fire.

This charger is very useful, but most people don't know it, you can go and buy one online and put it in the car, so you can be sure that you can use it anywhere. <>

Push the vehicle to ignition

If it is an automatic transmission car, then there is no way to use this method of pushing the ignition, only a manual transmission car can do it. If you have a manual transmission car and can't catch fire, you can call a group of people nearby to push your cart. You sit in the car and wait for them to push the vehicle, and then you start trying to light the fire, which is usually a successful time.

There are no benefits, then no one will want to help you push the cart, so you can buy them a pack of cigarettes or something each. <>

Call a service person

If you can't do the first two methods, then you can only call the maintenance personnel to charge you. Professional maintenance personnel, they will also have professional chargers, and they can help your car catch fire in no time. However, a few minutes of service may cost you hundreds of dollars, which is also relatively expensive.

The car is still useful, you can choose to replace the battery, so that the car can be restarted without worrying too much.

No, if the battery problem is more serious, the battery can be replaced, which does not mean that the vehicle is scrapped.

At this time, the car is not scrapped, if the car battery is scrapped, you can replace it with a new battery.

Rickshaw boosts start, this is the easiest way, I believe everyone has seen it in real life. That is, the owner of the car sits in the car and drives, and the other four people and a dog push the cart in the front and rear of the car. When the car has a certain speed, the owner puts the car into first gear.

This method requires finding a car that can be turned on normally, and using the wire to connect the positive poles of the two cars first, and then connect the negative poles, and the order is reversed when it ends. Don't get the order reversed!

If the car suddenly doesn't catch fire, it's broken, and you can fix it by yourself, it's very simple.

1. The cart emergency start, of course, this is only for manual transmission models, the ignition switch needs to be turned on before the vehicle is pushed, and after reaching a considerable speed, the transmission is put into gear, and then quickly release the clutch pedal and refuel. Once the engine starts, you should quickly press the clutch pedal while controlling the throttle so that the engine does not turn off, and then stop slowly.

Of course, it takes at least two people to start the cart, and it is difficult to implement it if there is only one driver. This method must not be used for automatic transmission vehicles, because it will cause some damage to the engine and clutch.

2. Borrowing car wiring bridge start method, this method can be used regardless of manual transmission or automatic transmission model. First, open the front covers of the two cars, connect the negative pole of the charging cable to the negative pole of the car, and the other end to the negative pole of the other car.

Similarly, connect the positive pole of the charging cable to the positive pole of the car, and the other end to the positive pole of the other car. Then let the other person's car ignite, step on the accelerator, and then enter the car to try to ignite. If it is true that the battery is running out of power, then the car should start quickly.

3. Mobile emergency charging treasure charging starts, the principle of car emergency charging treasure and mobile phone charging treasure is almost the same, and the car can be turned on when there is no power. Just clip the clip of the charger to the binding post and press the switch of the power bank.

1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it.

2. Emergency power supply: This is a new type of power bank like a thing, there are two kinds of lead-acid and polymer lithium battery, which can help the vehicle with a loss of power to start, and can also have lighting, charging mobile phones and multi-functional supplies used with an inflatable pump to inflate the car. And it is generally portable, very lightweight, if you have it, you don't have to ask others for help.

Be sure to charge it in time after use and keep it full of power to deal with emergencies.

3. Positive, first connect the positive: first turn off all the electrical equipment on the car, make the key in the OFF position, open the cabin cover to find the battery, there are positive and negative poles written on the battery, generally the red "+" sign is the positive pole, and there are generally two wires, at this time, take out the red one, open the battery cover, pinch the clamp on the head to clamp firmly the positive pole of the battery of the electric car, and the clamp at the other end to clamp the positive pole of the battery of the rescue vehicle. Be sure to connect the positive electrode first, then the negative electrode, do not reverse the order, and do not use the battery clamp to touch anywhere except the battery pile head.

4. Negative connection, negative connection: After the red positive electrode is connected, take out another wire, first clamp the negative pole of the tram battery, the negative electrode is generally black "—" number, and then pinch the other end of the clip, from beginning to end the clip do not touch other places, to clamp the negative pole of the rescue vehicle battery, when the connection will pop out of the electric spark, please don't be afraid, this also shows that you are right. The reason why the negative electrode is not connected first is because the whole vehicle is basically a negative electrode (that is, commonly known as "tie iron"), if the negative electrode is connected first, when connecting the positive electrode, the clip will cause a short circuit and burn the parts on the car when it touches any conductive place in the body.

5. After starting the vehicle, first remove the negative, and then dismantle the positive: after the battery is connected, the rescue vehicle will first ignite and charge the battery, and then the no tram enters the vehicle to open the key, at this time the instrument light will be lit smoothly, and then try to ignite (not more than 5 seconds), if it fails to start smoothly, step on the accelerator of the rescue vehicle, and the speed is kept at about 2500 rpm, and then the tram is ignited again, if the starter is no problem, the car has oil in the case of general can be started smoothly, after the non-electric vehicle starts, Remove the negative clamp first, then remove the positive clamp, for the same reason as why the negative pole is followed by the fourth one.

The positive and negative poles of the battery must not be reversed, and the order of assembly and disassembly should be strictly in accordance with the order of first connecting the positive and then the negative, and the first dismantling and then the positive.

The battery of the car has a power loss: the battery of the car is also a consumable, and it is recommended to replace the battery once in 2-3 years. If the battery is out of power and cannot ignite, you can take the method of taking electricity, first of all, the front of the two cars "face to face" (the two cars can be as close to each other as possible), and then turn off the rescue vehicle, so as not to burn the battery line due to excessive current, the electrical switches of the rescue vehicle are turned off, open the engine compartment of both sides (some car batteries are placed in the rear trunk, such as BMW), and find the positive and negative poles of the batteries on both sides (with red "+" for the positive pole and black "-" for the negative pole).

Remember the positive and negative poles of the vehicle, don't make the wrong connection.

Next, how to correctly connect the wiring method is: first connect the positive end of the battery of the loss-stricken vehicle with the positive end of the rescue vehicle battery; Then connect the negative pole of the rescue vehicle battery to the wire and then connect it with the iron sheet of the body of the vehicle with power loss (try not to connect the negative electrode, it is easy to produce sparks, and it will cause damage to the battery in serious cases.

Black is the negative wire, and red is the positive wire.

After making sure that the wires are connected correctly and that the contact is good, start the rescue vehicle; Let it run for a few minutes before charging the vehicle with a loss of power. Then start the loss-free vehicle.

If the loss of power vehicle can not start, this is to give the throttle of the rescue vehicle to some oil, and then to start the loss of power vehicle, remember not to force the start, pay attention to the start of the interval, if it can not start, it is necessary to consider whether the wire is too thin, the current caused is not enough.

Remember the positive and negative pole markings on the battery.

When the vehicle is started, the battery clamp can be removed at this time, and the order of taking power should be:

1. First remove the negative pole of the rescued vehicle with the iron wire, and then remove the negative pole wire of the rescue vehicle;

2. Furthermore, remove the positive wire of the rescue vehicle, and then remove the positive wire of the rescued vehicle.

Remember to pull in the wrong order.