When the elevator is closing, press the emergency button and the door will open

Updated on society 2024-05-14
10 answers
  1. Anonymous users2024-02-10

    No, after pressing the emergency stop button, the safety loop will be disconnected, the door motor will lose power, the door will be closed by self-closing force, and it can be opened manually.

    Pinching feet and hands, rolling people's clothes, sudden retrograde, and falling personnel may cause flying accidents. In the face of these possible dangers, please pay attention to this life-saving button before taking the escalator.

    Generally speaking, the panic button is recessed, protruding, etc., but all of them are eye-catching red. Panic buttons are installed in places that are not easily triggered but are easy to spot, usually in several places:

    1. At the handrail of the elevator entrance.

    2. The bottom of the cover plate on the inside of the elevator.

    3. The middle of a large elevator.

    In addition to this, there are a few more points that must be kept in mind when riding the escalator:

    1. Before getting on the elevator, determine the direction of the elevator to avoid stepping back.

    2. Do not ride the escalator barefoot or wearing shoes with loose laces.

    3. When wearing a long skirt or carrying items on the escalator, please pay attention to the skirt and items to avoid being hanged.

    4. When entering the escalator, do not step on the junction of the two ladders, so as not to fall down due to the height difference between the front and rear steps.

    5. When taking the escalator, hold the handrail tightly, stand firmly in the steps with both feet, and do not lean on both sides of the escalator or lean on the handrail.

    6. When there is an emergency, don't be nervous, shout for help, and remind others to press the emergency stop button immediately.

    7. If you accidentally fall, you should interlock the ten fingers of your hands, protect the back of your head and neck, and your elbows forward to protect your temples.

    8. Avoid letting children and the elderly take the elevator alone, and it is strictly forbidden to play on the elevator.

  2. Anonymous users2024-02-09

    That button is for alarming. It has nothing to do with elevator opening and closing.

  3. Anonymous users2024-02-08

    The alarm button and the opening and closing of the door have nothing to do with it.

  4. Anonymous users2024-02-07

    How does the alarm button have to do with opening and closing the door?

    There will be electricity when released.

  5. Anonymous users2024-02-06

    When the elevator is operating normally, you can not press the emergency button, otherwise it will cause unnecessary trouble to the management personnel.

    When the emergency button is pressed, it is locked for a moment, and at this time, you only need to press the button to eject the contents of the button, and the emergency brake will be automatically canceled.

    So don't panic, press this button again, you can cancel, the general elevator emergency button or backup is to prevent accidents will be pressed, if usually pressed, it will cause a fault to the elevator.

    An elevator is an elevator that serves a number of specific floors in a building, and its car runs at least two columns of vertical masses that are straight to the horizontal plane or at an angle of inclination to the plumb line.

    Permanent transport equipment for rigid orbital movements of less than 15°. There is also a stepped type, and the tread plate is mounted on the track for continuous operation, commonly known as escalator or moving walk.

  6. Anonymous users2024-02-05

    Hello oh kiss press the emergency button of the elevator will have an impact in non-emergency situations, you must not press the button at will, if the escalator suddenly stops, not only will the passengers be frightened, but also Bi Yu Kai may make the elderly, children fall, cause injury to others. Parents and friends should also take good care of the children around them, and do not let the children play by the escalator, so as not to cause unnecessary trouble or injury. Here's a little bit about the panic button.

    There are three places in the elevator emergency button, one is the handrail at the elevator entrance, the second is the bottom of the inner cover plate of the elevator, and the third is the middle of the large elevator. Usually, there are emergency stop buttons at the bottom of the handrails at the head and tail of the elevator, which are on the side, red, and can be pressed to stop urgently. The elevator emergency stop button is a necessary safety protection device for elevators, escalators and shouting moving sidewalks, and its outer surface color is red warning, and the spring is pressed down, and the recovery must rotate in the clockwise direction.

    In the event of an emergency in the elevator, such as fault maintenance, press the switch, turn on the line in the control loop and cut off the power, and the elevator will be stopped immediately to achieve protection. The structure of the emergency stop switch is to prevent the occurrence of remorse safety accidents caused by personnel misoperation, and it is also a safety protection during maintenance and maintenance. The elevator panic button is an indispensable safety protection component on the elevator of special equipment.

  7. Anonymous users2024-02-04

    Summary. 1. After the overhaul is completed, open the main break and reconnect the power supply; 2. Check the electrical components, motors and their connection systems, and check whether the door switches, brakes, safety devices, etc. are working normally; 3. Adjust the switch in the elevator operation control cabinet to the state of "open the door" to ensure that the door with automatic switch is not locked; 4. Check whether the elevator mast is in good condition, calibrate the locator and pull the handle in front of the elevator door; 5. Press the button, if the door can be opened automatically, indicating that the elevator door has returned to normal, you can adjust the switch in the elevator control cabinet to the "closed" state, so that the elevator runs normally; 6. If it cannot be opened normally, check whether the door is stuck, or whether the door has abnormal friction along the slide rail; 7. Check the lubricating oil on the door guide wheel, if there is a seepage phenomenon, it should be added in time to make the slide of the elevator door smoother; 8. When the overhaul is completed, the switch in the elevator control cabinet needs to be adjusted to the "closed" state to ensure the normal operation of the elevator.

    1. After the overhaul is completed, open the main break and reconnect the power supply; 2. Check the electrical components, motors and their connection systems, and check whether the door switches, brakes, safety devices, etc. are working normally; 3. Adjust the switch in the elevator operation control cabinet to the state of "open the door" to ensure that the door with automatic switch is not locked; 4. Check whether the elevator mast is in good condition, calibrate the locator and pull the handle in front of the elevator door; 5. Press the button, if the door can be opened automatically, indicating that the elevator door has returned to normal, the switch in the elevator control cabinet can be adjusted to the "closed" state, so that the elevator runs normally; 6. If it cannot be opened normally, it should be checked to see if the door body is stuck, or there is abnormal friction along the slide rail; 7. Check the lubricating oil on the door guide wheel, if there is a seepage and slippery phenomenon, it should be added in time to make the slide of the elevator door smoother; 8. When the overhaul is completed, the switch in the elevator control cabinet needs to be adjusted to the "closed" state to ensure the normal operation of the elevator.

    It's already packed. Turn on the emergency brake, this will close the door, how to open the door?

    1. Press the "emergency door opening" button in the elevator operation box to open the associated control car circuit, so that the elevator door can be opened normally. 2. Open the elevator cabin door and turn off the emergency braking control module in the elevator. 3. Open the "Emergency Door Close" button in the elevator control box, and restore the associated control circuit to standby state, so that the elevator door can be opened normally.

    4. Turn on the "Run" button in the elevator control box, the elevator status will return to normal, and the elevator door can be opened and closed normally.

  8. Anonymous users2024-02-03

    Summary. The emergency stop of the elevator is designed for emergency situations, if there is no problem with your own elevator, press the emergency stop button back to the original state, if the elevator does not have a fault, you can continue to use.

    In the program, in front of the output point of the elevator rising and descending, add a normally closed input point (, connect an emergency stop button to the input point (in), when the emergency stop button is disconnected, the program is normally closed and normally open, and it is broken.

    The elevator pressed the pause button to close the door how to open from the outside.

    The emergency stop of the elevator is designed for emergency situations, if there is no problem with your own elevator, press the emergency stop button back to the original state, if the elevator does not have a fault, you can continue to use. In the program, the output of the elevator ascending and descending liquid is buried in front of the point (, adding a normally closed input point (, and an external emergency stop button is connected to the input point (middle), when the emergency stop button is disconnected, the program is normally closed and normally open, and it is broken.

    You can click Oh again to restore the original way it was

    The problem is that now the elevator door is closed and you can't get in, and the bridge box is pressed.

    In this case, you need to find a maintenance person, or the property to turn on the master control button.

  9. Anonymous users2024-02-02

    The elevator doesn't have a forward button, what should I do? Report for repair**.

    1.Safety first, prevention first.

    2.The eyes can't tolerate a grain of sand, and safety can't be sloppy.

    3.Prevent the slightest slight, and the alarm bell will sound for a long time.

    4.A healthy body is inseparable from exercise, and a happy family is inseparable from safety.

    5.Our city has your blood and sweat, and your peace is our wish.

    6.Don't take chances in safe production, and violate rules and regulations to kill people.

    7.Paralysis is the biggest hidden danger, and dereliction of duty is the biggest bane.

    8.Safety is the guarantee of family happiness, and accidents are the bane of life tragedy.

    9.The enterprise is responsible, the industry is managed, the GJ is supervised, and the masses are supervised.

    10.Follow the rules and laugh with loved ones. Driving illegally, it is the grim reaper who laughs at death.

    11.Work hard first, everything is safe.

    12.It is better to go around a hundred meters away than to shout and tremble.

    13.Improve safety awareness and build a civilized construction site.

    14.Adventure is the friend of accidents, and caution is the foundation of safety.

    15.Construction safety comes first, and safety is a blessing in a long life.

    At the bottom of the top and bottom handrails, they are on the edge, red, and can be pressed to make an emergency stop. When confirming that someone is caught in the elevator, the people around you should quickly find the button and press it decisively, however, in non-emergency situations, do not press the button by mistake, or press it for fun, otherwise the sudden shutdown will easily cause passengers to fall, overturn or step on. It should only be pressed decisively if it is confirmed that someone is involved.

    In view of the fact that it is not uncommon for escalator coil pins to leak people, and once it happens, the losses caused will be very large, therefore, emergency training should also be carried out for service personnel in public places where escalators are installed.

    Extended information: Slightly different from manufacturer to manufacturer. Basically, there are both ends of the lower end, and there are also in the middle of the long roller ladder, and red and round buttons are generally used.

    There are two kinds of non-stop: man-made non-stop, man-made operation, automatic non-stop safety device induction. For example, clothes are put into the handrails of the ladder, shoes are clipped into the edge of the ladder, and so on.

    Safety precautions: Take the handrail when taking the elevator, always pay attention, and an emergency stop may occur at any time. In particular, when descending, an emergency stop will cause passengers to fall down to one side, which is very dangerous!

  10. Anonymous users2024-02-01

    As shown in the figure below, the button with two arrows facing each other closes the door, while the button with the two arrows facing away from each other opens the door.

    The steps to take the elevator are as follows:

    2. After entering the elevator, select the floor you want to go to, if you want to choose to go to the 5th floor, click "5".

    3. After pressing 5, click the button to close the door to close the elevator door.

    4. After arriving at the designated floor, the elevator door will automatically open and you can walk out of the elevator.

Related questions
10 answers2024-05-14

Mobile network problems!or word problems.

7 answers2024-05-14

FPS refers to the smoothness of playing the game, the higher the better, [preferably more than 500] the lower the card, you can't see it. FPS is mainly related to the graphics card... Ping is the network speed, the smaller the better, [the best is 1 ping, and -1 ping, but there are disadvantages to ping too small, what are the disadvantages?? >>>More

14 answers2024-05-14

How to enter safe mode 4. Enter safe mode in the Windows XP environment >>>More

13 answers2024-05-14

Li Kui, nicknamed ".Black WhirlwindShuibo Liangshan is one hundred and eight generals. >>>More

7 answers2024-05-14

You need to press the F1 key to enter the boot, mainly because the settings in the BIOS do not match the real hardware data, which can be divided into the following situations: >>>More