What does it mean for a computer to have a standard hard disk error reporting task

Go online and offline.

After getting it, copy it to C: Windows system32 to safe, then it's better to start running regsvr32

Are you sure. If you can't find anything after this command is executed,,, don't worry about it, restart the computer as long as this problem doesn't occur again.

That's it.

There is a problem with the hard drive, or the data cable is not in good contact.

It could be that the hard drive is broken.

1.Unplug the USB flash drive plugged into the computer and restart it.

Because when installing the system, you may need to adjust the system to a USB flash drive to start,After installation, if you forget to change it back,The computer will monitor whether there is a USB flash drive connected every time it is turned on,If there is,It will try to start from the USB flash drive,So there will be disk error,Please enter any to restart the phenomenon。

2.If the disk cable is not plugged in securely, the method is to remove it and plug it back in again.

Because after the computer has been used for a long time, the connection cable of the hard disk and other hardware may be loose, resulting in poor contact when the system boots into the hard disk.

3.Use Windows Optimizer to fix it.

Disk error, bad sectors or bad sectors, if you check out that there is, this is the problem. If it doesn't work, there is only a low-level hard drive.

If this does not work, please send it for repair.

Just reinstall a land win7 system.,It's shielded above.。

It could be that the hard drive is broken.

PC, boot shows that the hard disk is wrong and needs to be repaired, usually the last time it was not shut down normally, or the last time the system detected that the hard disk was abnormal, there may be bad sectors, and it will be prompted to repair it the next time it is turned on.

Follow the prompts and fix it. There is a chance that some files will be lost, but the repair tool will salvage some of the files.

The repair tool that comes with your PC is chkdsk.

The full name of chkdsk is checkdisk, which means disk check. This thing is called by the system to check the disk when your system is dropped or illegally shut down, or it can be manually called by the command line to check a disk partition. The tool creates and displays a status report of the disk based on the file system used by the detected partition.

chkdsk also lists and corrects errors on disk. If you don't have any parameters, chkdsk will display the status of the disks in the current drive.

Unknown hardware error, you unplug the memory and use the eraser to carefully wipe the gold finger and polish it and then reliably insert it into the general no problem, if it still can't boot normally, then you'd better check whether the hard disk has a physical bad sector, if there is and the warranty period has not expired, go to the after-sales service to replace the hard disk.

This friend, if the hard drive is wrong, it needs to be fixed. Try it out with the software first. I think the most practical thing is the source of efficiency.

Or use the DM partitioning tool that comes with the system disk, which has a utility in it. Try it with track filling. It should be solved...

What are you doing on your computer when you have a blue screen on your computer, can you tell us about it? I'll tell you what you say more accurately.

The content in the blue screen** or event viewer is incomprehensible to ordinary people, please explain your performance on the computer in front of the blue screen in detail with your operation (I will re-follow you according to the information you provided).

Generally, the blue screen is caused by your own incorrect operation, remember not to do the operation that is easy to cause the blue screen. The computer should not operate at full capacity, that is, when playing games, watching, watching, and watching web pages at the same time, it is most likely to crash and blue screen while doing other finger hall operations, so when playing games, watching, **, and watching web pages, don't only slowly operate other things.

No matter what you're doing, as soon as there is a sign of a card, stop the operation at hand and quit the try, so that there will be no blue screen, if you disturb the fruit or do this, don't play or don't watch it.

Hardware: If the memory is small** memory module, whether the hard disk has bad sectors, whether the hardware is incompatible or faulty, use Master Lu to test whether the temperature of the CPU and other hardware is high.

If it's not a blue screen,Please ask me what's wrong with your computer.,I can't understand just looking at this.,If you look at this or what prompt you know exactly what's the problem**, you don't have to ask here.,Check it up.,You say that's it, right?

There's a problem with the memory, so try a different memory.

.Right-click on My Computer--- there is an error report under the Advanced --- window, and check Disable Error Report Reporting.

My Computer Right-click Properties Advanced Error Reporting Check Disable Error Reporting OK.

Hello users:

Could you please describe the situation in detail? Please take a screenshot if it is convenient.

Start Run" command, enter "regsvr32 U" in the "Run" field, and then the bare-metal "OK" button, and when presented with a prompt box of "Succeeded in DLLunregisterserver", it should be fine. If it doesn't work, you can repeat the operation again to restore the file preview function.

Virus troublemaker.

Install anti-virus software for Big Spider.

This is the process of Kingsoft software, which means that there is a problem with the software, is there a network problem when the network is upgraded? If this is often the case, it is advisable to uninstall the software and reinstall it.

There is a problem with the hard disk, or redo the system.