Why are the tiles in my friend s house always not cleaned?

Over time, stains may seep into the surface of the tile, making it difficult to clean. It is advisable to replace the soiled tiles.

The tiles of my friend's house are always not clean. It may be because it is heavily contaminated with grease. Clean up with detergent, hot water, etc.

Not always clean? It may be because the mop is not cleaned often, and it may be that the quality of the tile itself is a problem, my home is Terrence tile tile, easy to clean, wear-resistant, waterproof, non-slip, it is recommended that you can refer to it.

I don't like to be clean, I don't like to clean, there is dust and oil on the tiles for a long time, so I want to clean them up in time, or I won't get them for a long time

Your friend's tiles are always not clean, it must be your friend is not diligent enough, if you clean it often, the tiles cannot be unclean.

Tiles are good and bad, with tiles may have a relatively small density, easy to get dirty, so clean is not clean, with a tile density is relatively large, not easy to get dirty.

The tiles are not clean, some of the quality of the pool is not good, and there may be too much material.

Why are the tiles in my friend's house always not cleaned? Because the tiles of your friend's car are not cleaned in place. What is the reason that it is too dirty to clean up. The early cause, the right medicine, can be cleaned up in the cleanup.

Oh, there are many reasons why the tiles are not clean, sometimes it is clear when the cement is hit. This is also the reason why the quality of the tiles is not good.

Why are the tiles in my friend's house always not cleaned? I think it's still a problem with tiles, some of the inferior tiles are put on sewage or other things, it will eat into the tiles and can't be wiped clean.

The tiles are always not clean, maybe he doesn't have a careful manager.

If your friend's tiles are always not clean, it should be that the quality of the tiles is very poor and it is not easy to clean.

I don't know what type of tile you are talking about? Is the unclean substance present on the brick itself, or is it dripping on the brick surface during the renovation process?

If the brick itself exists, this is the protective wax of the tile, which can be wiped by sprinkling putty powder on the brick surface, and then rubbing the putty powder.

There is a type of tile called non-slip brick, and the surface is uneven.

Try it with banana water, it should work.

There are two reasons why the tiles are not always clean: one is that the home itself is not very clean, and the other is that the tiles are too rough and easy to fall dust.

The following solutions are given:

1.Laundry detergent can be used.

and dish soap to clean the grease from the tiles.

2.It is also good to use white vinegar to clean the grease stains of kitchen tiles and the dirt of bathroom tiles, and it can also play a sterilizing role3Dip a rag in a little baking soda.

With water, it can also clean the tiles well.

4.You can choose a special tile cleaner that can remove all kinds of dirt from the tiles.

Hope mine can help you

1. If the surface of the tile is dirty, but it can't be wiped off, the important thing is that we didn't choose the right tools, including scrubbing tools, and some cleaning agents. Prepare a watering can, add white vinegar, baking soda and an appropriate amount of toothpaste, add clean water, stir well, and spray directly on the dirty tile surface.

2. Use a brush to scrub and easily scrub the surface stains clean. The baking soda is an alkaline substance, which can remove oil, especially stubborn stains, as long as it is mixed with water. The white vinegar has the effect of softening the dirt and can also play a sterilizing effect, so the combination of these kinds can wipe the dirty tiles clean.

3. If you are afraid of trouble and don't want to make your own, go directly to the supermarket to buy a tile cleaner. It is a cleaning agent specially for tile cleaning, as long as you spray it, and then wipe it with a rag, you can achieve immediate results.

What are the reasons why tiles are not clean and always blurry.

First, the tiles are not clean and always blurry reasons.

1. If the wax layer on the front of the tile cover is not cleaned, it will cause the surface of the tile to be dull. 2. The use of detergent is not suitable, and corrosion occurs, resulting in the loss of luster of the tile. 3. The glaze produces white mist and loses its luster.

4. Use hard objects to clean tiles, and use too much force, resulting in scratches.

Second, what are the ceramic tile maintenance methods?

1. Clean the texture.

Some buried tiles have uneven textures, at this time, when cleaning, you can clean along the texture, for the tea or other stains on the tile, you can clean it with dish soap, which can make the surface of the tile more shiny.

2. Clean the seams.

For the joints in the tiles, it is easier to hide dirt and dirt, you can first use a toothbrush to dip some stain remover paste to clean, and then apply waterproof glue to the joints of the tiles, which can not only play a waterproof role, but also play a role in preventing mold growth.

3. Decontamination and waxing.

After a long time of tiles, there will always be a lot of stains on the surface, resulting in stains that are difficult to clean and lose their luster, so it is necessary to wax the tiles regularly to make the surface of the tiles more shiny.

4. Stubborn stains.

If there are stubborn stains on the surface of the tiles and it is difficult to clean, you can use a multi-functional stain remover to effectively remove the stubborn stains on the tiles and make the surface of the tiles more shiny and brighter.

5. Tile scratches.

After the tile has been used for a long time, it is inevitable that there will be some scratches, for the tile scratches, you can apply toothpaste to the scratches, and then wipe them with a rag to repair the tile scratches.

How to clean the tiles is relatively clean, the method is as follows:

1. Toothpaste. It is especially convenient to clean with toothpaste, mainly use a brush dipped in the tooth paste to brush gently, and the dirt will be gone.

2. Vinegar. The acetic acid in vinegar is a weak acid that reacts chemically with many stains and does not damage the surface of the floor tiles.

3. Baking soda.

Baking soda not only cleans floor tiles, but also kitchen countertops, stoves, refrigerators, and more.

4. Dish soap.

You can sprinkle a layer of dish soap on the surface and wipe it with a steel wool ball to remove it easily.

5. Turpentine.

A mixture of soap and a little ammonia and turpentine can remove a lot of dirt.

6. Rice soup. 7. Bleaching powder.

Alkaline cleaners such as bleaching powderBleaching powder is a powerful stain remover that can be used not only to clean clothes, but also to work wonders on tile stains.

8. Alcohol. Clean with alcohol, for the surface of the tile accidentally contaminated by paint or drawing pen, it can not be cleaned with water, at this time you can choose alcohol, spray it on the stain, wait until a period of time, the stain will soften, then wipe it off with a rag.

9. Hydrogen peroxide.

Because hydrogen peroxide has strong oxidation, it can oxidize the unsaturated bonds in the oil stain to form soluble substances and achieve the goal of removing oil stains.

84 disinfectant cannot remove grease from tiles.

The grease on the tiles can be removed in this way:

1. Spray some water on the oily area, then sprinkle it with flour, smooth it out, and let the flour absorb the grease as much as possible!

Second, after absorbing the oil, the flour will become a dough, which can be easily wiped off with waste newspapers!

3. Repeat this a few times to become very clean, and finally wipe it with a damp rag.

84 disinfectant can be used for disinfection of dining utensils and environmental objects

1. Soak and disinfect dining utensils, vegetables and fruits, and general clothing: 1:250 times dilution, that is, 1 part of disinfectant and 250 parts of water are mixed (equivalent to 220-260mg L) and soaked for 20 minutes, and rinsed with water.

IIEnvironmental disinfection: 1:250 times dilution, that is, 1 part of disinfectant is mixed with 250 parts of water (equivalent to 220-260mg L), which can be sprayed, wiped, scrubbed and soaked. Such as floors, doors and windows, tables and chairs, sanitary ware, etc.

IIIDisinfection of infectious disease human contaminants: 1:25 times dilution, (equivalent to 2200-2600mg l) soak for 60 minutes. (Items will be corroded at this point).

In life, we have summarized a lot of the wonderful uses of 84 disinfectants:

Remove the stains of tea cups and coffee cups: soak in 1:100 times diluted 84 disinfectant solution for 30 minutes and rinse with water to completely remove tea stains and coffee stains.

Remove towel sweat stains and odors: Soak in 1:100 times diluted 84 disinfectant solution for 30 minutes, scrub with water, can remove towel sweat stains, dirt and remove odors.

Children's plastic toys: 1:250 times diluted 84 disinfectant, soak the toys for 20 minutes, that is, to achieve disinfection and play a role in the plot.

Kitchen board: 1:250 times diluted 84 disinfectant, brush the board, which can have the effect of sterilization and oil removal and cleaning.

The laying of floor tiles is also one of the floors that most people choose. However, in the process of use, dirty or scratches are often occurring, and the more difficult part to deal with is the scratches.

Treatment 1: Toothpaste.

For minor scratches that do not damage the surface structure of the tile, you can apply the toothpaste evenly around the scratches, wipe it repeatedly with a dry cloth, apply some wax oil to it, and then wipe it clean with a clean cloth.

Treatment 2: Paint or nail polish.

For slightly noticeable scratches, you can dip a little paint in the same color as the tile, or gently wipe it directly with nail polish, remember to clean the brick surface before wiping.

Treatment 3: Waxing.

Minor scratches can be waxed to achieve the effect of fading and masking.

Treatment 4: Oxalic acid.

Use a soft rag dipped in oxalic acid and wipe vigorously to repair tile scratches.

Treatment 5: Sandpaper sanding or steel wool ball wiping.

Great care needs to be taken when sanding with sandpaper or steel wool, otherwise it is easy to damage the tiles and cause deeper scratches.

Treatment 6: Use detergent.

You can soak it with detergent for 3 minutes before scrubbing, the floor tile cleaner will become loose after decomposing with the metal scratches, wipe it with a wet towel dipped in the detergent a little harder, the original appearance of the brick surface will be shown immediately, and it will not affect the surface of the floor tiles, and the luster will not change in any way.

Treatment 7: Scratch cleaning repair agent.

At present, there are also professional scratch cleaning and repair agents on the market, use a small brush to dip a little repair agent in the scratch gaps, wait for half an hour after drying, and then repeat the application twice until there is reflection from the side, so that the scratches and stains will disappear without a trace. After treatment, the floor tiles are almost invisible, and the glossy surface is not affected.

Repair step 1: First, clean the surface area of the tile with small scratches and make sure that there are no stains attached to the surface of the tile.

Repair Step 2: Then wipe the tiles back and forth with a damp and clean rag to thoroughly clean the stains of fine scratches, and then wipe off the excess water with a dry rag.

Repair step 3: use wax to wax and fill the small scratches, pay attention to wipe evenly during the waxing process, and ensure that the wax layer can cover the tile scratches well, wax is completed, wait for a few minutes.

Repair step 4: Finally, use polishing wax to wipe the tile surface back and forth again to polish it to achieve the purpose of sealing wax, which can avoid the appearance of secondary scratches.

Mix white vinegar with highly alkaline stuff and it's easy to rub.