Excuse me, can you trouble the software of the powder tablet press, thank you.

The selection of tablet press needs to consider the scope of application, rated voltage and other factors, such as the scope of application of snack food factory, seasoning processing plant, etc.; The rated voltage is 220V, 380V, 3V, etc. The ** of the tablet press is about 10,000 yuan per unit, and the cheap ones are several thousand yuan.

Tablet presses are mainly used in tablet process research in the pharmaceutical industry. The tablet press is an automatic continuous production equipment that presses granules into round, special-shaped and graphic flakes with words, symbols and graphics with a diameter of no more than 13mm.

Chinese name. Tablet presses.

Foreign language name. tablet press machine

Classify. Single-punch tablet press, flower basket tablet press.

Use. Tablet process research in the pharmaceutical industry.

Definition. Tablet Press Definition: According to the noun terminology standard, there are the following definitions of tablet press:

1) Tableting machinery, the machinery that presses dry granular or powdery materials into tablets through molds.

2) Single-punch tablet press, a tablet press with a pair of molds for vertical reciprocating motion.

3) Rotary tablet press, which is a tablet press in which multiple sets of molds evenly distributed on the rotary turntable move vertically according to a certain trajectory.

4) High-speed rotary tablet press, a rotary tablet press with a linear speed of not less than 60m min when the axis of the mold rotates with the turntable.

Classify. The models can be divided into single-punch tablet presses, flower basket presses, rotary tablet presses, sub-high-speed rotary tablet presses, automatic high-speed tablet presses and rotary core-spun tablet presses.

Structural composition. A machine in which granules or powdery materials are placed inside a die hole and pressed into tablets by a punch is called a tablet press.

The earliest tablet press was composed of a pair of punches, and the punches moved up and down to press the granular materials into sheets, which was called a single tablet press, and later developed into an electric basket tablet press. The working principle of these two tablet presses is still one-way tableting based on manual compression, that is, the downstroke is fixed when the tablet is pressed, and only the upstroke movement is pressurized. In this way of tablet compression, due to the inconsistent upper and lower forces, the density inside the tablet is uneven, and it is easy to produce problems such as splinters.

Wouldn't it be better if you just searched for this?

The villain is good at quitting v good just now vm is often.

Method does not reply** to relax.

Abstract:Powder tablet press is a kind of equipment that can press various special-shaped and ring-shaped tablets, which is mainly used for the production of large-scale tablets in the Chinese and Western pharmaceutical industries, and is also suitable for chemical, food, electronics and other industrial sectors. The method of using the powder tablet press is very simple, before use, it is necessary to check whether the machine, mold, and granule raw materials meet the production requirements, and then turn on the power supply, and pour the raw materials into the machine for automatic processing.

Powder tablet press is a single-pressure automatic rotating, continuous tableting equipment, which can press pharmaceutical tablets, coal touch, sugar tablets, calcium tablets, coffee tablets and other products. The powder tablet press can press all kinds of special-shaped and ring-shaped tablets, and can press tablets engraved with trademarks, words and simple graphics on both sides, so it is widely used in the production of large-scale tablets in the Chinese and Western pharmaceutical industries, and is also suitable for chemical, food, electronics and other industrial sectors.

How to use a powder tablet press correctly.

1. Before use, the quality of the die must be repeatedly checked, whether there are missing edges, cracks, deformation and incomplete tightness, and whether the device is complete and good.

2. Check whether the powder of the granule raw material is dry and the powder content in the granules should not exceed 10%. If it is unqualified, do not press hard, otherwise it will affect the normal operation and service life of the machine and the loss of raw materials.

3. The first test should be placed on the indicator needle controlled by the collapse force regulator 6, pour the powder into the bucket, rotate the test wheel by hand, adjust the filling and pressure at the same time, and gradually increase to the weight and hardness of the tablet to meet the requirements of the finished product, and then start the motor first, and then open the clutch, and carry out formal operation and production, in the production process, the quality of the tablet must be regularly sampled, whether it meets the requirements, and if necessary, it is adjusted.

4. The choice of speed has a direct impact on the life of the machine, due to the nature of the raw materials, viscosity and the size and pressure of the piece can not be uniformly specified in the use, the structure of the machine is stepless speed change device, slow speed is suitable for pressing minerals, plant grass, large pieces of Zen loss, viscosity difference, etc. and fast and difficult to form materials. It is quickly suitable for agglomerate bonding, smooth and easy to form materials. Therefore, the user must be based on the actual situation.

5. Management personnel must be familiar with the technical performance, internal structure, use principle of the control mechanism and the working place during operation, in order to prevent damage to the machine parts due to failure, so as to ensure safe production as the premise.

6. In use, pay attention to whether the sound of the machine is normal at any time, and stop the machine to check and eliminate it in case of screaming and strange sounds, and do not use it reluctantly.