4mm thick endurance board price, how much is 4mm endurance board per square meter

Kebao Endurance Board Product Features:

The light transmittance of 0mm light diffusion PC endurance board is 65%-70%, while the light transmittance of general-purpose PC endurance board is only 20%. So in.

Advertising light box industry use, advertising effect more realistic.

2. The general-purpose PC endurance board can penetrate the LED lamp source, and the light diffusion PC endurance board can fully scatter the traditional fluorescent lamp of the LED endurance board lamp.

Due to the large power consumption and high operating cost), after switching to LED light source and light diffusion plate, it can save more than 80% of the electricity bill.

The economic benefits are remarkable.

3. The impact resistance of the endurance board is 20-30 times that of the acrylic plate, and it is not easy to be damaged during installation and transportation.

4. The flame retardant grade of the endurance board is higher than that of the acrylic plate, reaching the flame retardant B2 level, and the safety performance is higher.

5. The temperature resistance of the endurance board is -40 -+120, and it will not be deformed due to the long-term irradiation of the lamp source.

The general ** is more than 120 yuan a square, and you can ask Kebao roofing network for details.

If you want a general quality 4mm endurance board, it's about 110 yuan.

There are many manufacturers and distributors of endurance plates in the advanced market, so there are some gaps, but according to the advanced market, if the endurance board is ordinary, a thickness is about 25 yuan, and it varies according to the thickness and quality of the plate, so 4mm is about 100 yuan. The thickness of a better one is about 30 yuan, so the 4mm one should be about 120 yuan.

However, the products are generally large and preferred, if you want more, it will be discounted, and it is best to buy it at the purchase point of the manufacturer or factory direct sales, so that it will not only be much lower, but also guaranteed in terms of quality. Nanjing Sang Deyong Garden building materials **** is a good choice.

3mm endurance board per square meter** is 85 yuan to 100 yuan.

At present, the 3mm is 85 yuan to 100 yuan per square meter, and the 5mm endurance board is about 135 yuan to 180 yuan per square meter, which is not fixed, because the PC endurance board or the sunshine board are related to raw materials.

Characteristics of Endurance Plates:

1. Light transmittance, good light transmittance (light transmittance up to 88%). Exposure to sunlight will not produce yellowing, fogging, and poor light transmission.

2. Weather resistance, there is an anti-ultraviolet co-extrusion layer on the surface, which can prevent the resin fatigue yellowing caused by sunlight ultraviolet rays. The surface coextrusion layer has chemical bonds that absorb tight outer lines and convert them into visible light. It has a good stabilizing effect on plant photosynthesis.

3. Impact resistance, PC is the best impact resistance among thermoplastics, even if its latent deterioration is still small at high temperature, and the stress is also small. PC endurance board is 200 times stronger than traditional glass, and acrylic board is 30 times stronger, and has the reputation of "unshattered glass".

4. Flame retardant, according to the national GB8624-97 test, it is flame retardant B1, no fire droplets, no toxic gas.

5. Temperature resistance, low temperature embrittlement temperature is -100, high temperature softening temperature is 146, the allowable temperature is -40 to +120 under long-term bearing conditions, and the short-term bearing temperature is -100 to +135.

6. Sound insulation, good sound insulation effect, is the preferred material for highway noise barrier in the world. The soundproofing characteristics of a material are determined by hardness, weight, and physical structure.

7. Thermal insulation, endurance board is one of the synthetic resins with small linear expansion coefficient. The coefficient of expansion of the line in different directions of the plate is slightly different, and the average is in. The thermal conductivity of the PC solar board is very different from that of the general synthetic resin, and it is a glass hair 1 4

1 300 for iron, 1 1000 for aluminum, and 1 12000 for copper, which is a material with good heat preservation.

8. Good processability, can be cut by hand, no need to heat at room temperature can be cold bent. Light weight, easy to handle, drilling. When truncated and installed, it is not easy to break, and the construction is simple and the processing is good.

9. No pollution, environmental protection, Puning PC endurance board is tasteless, non-toxic and non-radiation, no toxic substances are produced in the production and use process, and the product can be used as a modern new green building material. <>

As we all know, there are many plates available for people to choose from on the market now. However, in recent years, we can often see the figure of endurance boards in building decoration. Because this empty reed plate is impact-resistant, hard, anti-theft and bulletproof.

That's why it's deeply loved by people. So, how much is an endurance board per square? What exactly are the advantages of endurance plates?

Let's listen to Ichidou didn't bring one.

1. How much is an endurance board per square meter?

It is understood that the calculation method of endurance plates is different in different places, some places are calculated according to the area, and some are calculated by weight. However, there are many endurance board brands on the market, and different brands are uneven, and there are different materials and colors, which also affect the plate. The following is a list of several brands of endurance plates, let's take a look:

a. Yuemei endurance board, price: about 110-120 yuan square meters;

B. Jienai PC endurance board, selling price: about 30-35 yuan square meters;

c. Songxia endurance board, selling price: about 60-65 yuan square meters;

D. Super sub-PV endurance board, selling price: about 30-35 yuan square meters;

e, Banghua endurance board, selling price: about 50-55 yuan square meters.

Of course, the above ** is only for your reference, as for the endurance board how much is a square? It depends on what you actually purchased**, or you can go to your local store to find out.

2. What are the advantages of endurance boards?

First of all, the weight of this sheet is light, it can be said that it is only half the weight of glass. Therefore, it is easy to transport, unload and install, and it is also a lot of savings compared to some other boards.

Secondly, the endurance board has good light transmittance. It will not produce yellowing when exposed to sunlight, and the light transmittance can reach 89%, which is incomparable to many materials.

In addition, it has good impact resistance. Not only 250-300 times that of ordinary glass, but also 30 times that of acrylic sheets of the same thickness, and 2-20 times that of tempered glass. Therefore, it has the reputation of "unbroken glass" and "ringing steel".

Then, the endurance board is also UV protected. It can block the passage of ultraviolet rays, so it is ideal for protecting valuable works of art and exhibits from being damaged by ultraviolet rays.

Finally, endurance board also has many advantages such as sound insulation, flame retardant, anti-condensation, bendability, easy processing, energy saving and environmental protection. That's why it's widely used in home decoration.

I found the ** of Shanghai Jienai endurance board from the Internet, you can refer to it, but you still have to ask the manufacturer for the specific **.

Shanghai Jienai PC endurance board per square meter**.

Endurance boards** are generally calculated by kg, and there are also calculated by square meters. The most important thing is to calculate the level of production technology, the performance of the plate, the raw materials and other costs at that time.

The ** of Shanghai Jienai Endurance Board is calculated per kg as follows:

Generally, in the range of 25 yuan -35 yuan kg, the surface structure is divided into plane, size frost, particles, skin grain, Ling Jing pattern and other textures.

12mm--100mm thick PC endurance board, ** generally in 25 yuan - 100 yuan kg, this thickness of PC endurance board is generally used less, mainly transparent plate.

PC Endurance Plate Different Applications**:

PC endurance board for large-scale lighting projects**: 25--50 yuan kg

Station lighting roof, gymnasium, swimming pool, basketball hall, exhibition hall, or other various venues).

Greenhouse PC corrugated board**: 25--30 yuan kg

Agricultural greenhouse) lighting with PC endurance board or PC corrugated board**: 25--30 yuan kg

It is recommended to use the same shape as the color steel tile PC corrugated board to reduce costs, waterproof and dustproof).

Curtain wall PC endurance board**: 25--50 yuan kg

It is commonly found in airports, building exterior walls, curtain walls, and facades, and is easy to install using U-shaped PC endurance panels. ）

Parking shed PC endurance board**: 25--30 yuan kg

Parking sheds, garage entrances and exits, etc.).

Canopy PC endurance board**: 23--30 yuan kg

Suitable for all kinds of canopies).

The ** of the endurance board per square meter is usually not fixed, as far as the current ** in March 2020 is concerned, the ** according to the thickness of the endurance board, the 2mm endurance board ** is usually about 38 yuan a square, and the 3mm transparent blue green endurance board ** is about 60 yuan, and the specific ** still depends on the size, you can ask the number of 139, the middle 2823Finally, 4159, the factory can ask by itself, and the retail and wholesale can be customized according to your size.

Hello, market endurance board unit price ** method:

1. The unit price of kilograms, endurance boards usually range from 24 to 30 yuan per kilogram, (there is a big gap between domestic and imported endurance boards).

2. Square unit price = kilogram unit price * density (thickness.

For example: you need 1 meter (width), 2 meters (length), thickness (5mm), transparent color, kilogram unit price: 25 yuan kilogram, then, what is the endurance plate of a board**?

Calculation method: 1. Density.

2. Square unit price: 25 yuan (kilogram unit price) * density) * 5 (thickness) = 150 yuan

3. A 5mm thickness transparent endurance board**:

Square unit price * square = 150 (square unit price) * 1 (width) * 2 (length) = 300 yuan.

That is to say: 1 meter (width), 2 meters (length), thickness (5mm), color transparency, kilogram unit price: 25 yuan kilogram, then, a board of endurance board ** is 300 yuan.

In addition, special colors (black, red, yellow, gray) are added to the kilogram of 5-10 yuan per kilogram.

In terms of the current PC**, the endurance board is about 33-36 yuan 1mm thickness, and the 3 mm endurance board is 33-36 yuan multiplied by 3 is the first range of one square meter 3mm thick endurance board. Hope it helps.

Now there are many manufacturers and distributors of endurance boards on the market, so there are some gaps, but according to the current market endurance boards, 1mm is about 40 yuan per square meter. But the product is generally a large amount of preferential, if you want more can talk to the talkers, there will be some discounts, and it is best to buy at the factory or factory direct sales of the purchase point, so that not only will be much lower, but also guaranteed in terms of quality.

Endurance board, also known as PC endurance board, the main material is polycarbonate, and the main factors affecting the endurance board are raw materials, UV layer, and processing technology. The high-end is the PC endurance board produced by Bayer and Saber basic materials, and the project has been used for more than ten years, but the disadvantage is that the cost is slightly higher.

Endurance Sheets** are calculated according to thickness and color and size dimensions. The 6 mm endurance board you said, ten years warranty (real ten years), transparent color, one square meter is about 200 230 yuan! If you use a slightly worse material, it can be much cheaper, and there are about 130 150 on the market, but the quality is not the same!

Outstanding technology conventional endurance board stock specification 1220mm*2440mm, thickness has.

Other thicknesses, specifications and sizes can be customized, the widest width of outstanding technology is not greater than the width of meters, and the length is theoretically arbitrary.