About computer formatting and drive reinstallation methods

Buy an XP plate from Tomato Garden. Optical drive boots, select Auto Install. If your hard drive is SATA serial, choose SATA to install automatically. The whole process is done by yourself. The optimized system looks good and is easy to use.

I'll just use it. It's a lot faster than the original.

If you have any questions, just add me q28762311...Hope it helps.

What exactly is a drive?

If you format a disk, you can format the disk letters except the system disk under Windows, and the system disk, which is the main logical partition, can be formatted in the DOS environment, or you can use the disk utility that comes with the system installation disk to format it.

When formatting a disk on a computer, if you are unable to do so and the message "Windows cannot format this drive, it means that there is a program that is occupied and must be exited before you can format the disk." If we encounter the above situation, how should we solve it? Next I will tell you the workaround for the problem that Windows cannot format the drive.

What to do if the computer can't format the drive

1. Right-click on the computer and open the properties;

2. Click "Advanced System Settings" in the upper left corner;

3. Click "Settings" in the performance column;

4. Switch to "Advanced" and click on Virtual Memory.

the "Change" button below;

5. Select the drive letter where the disk is located, such as D drive, and select "No paging file" to close the virtual memory set to Paixiang.

6. Press win+r to open the run, and enter cmd to open the command prompt.

and run format d: -u.

Summary. Hello, first of all, the files inside the drive can only be deleted and there is no formatting option.

Secondly, the format option is for the entire drive, and you can right-click Format in the partition list of your computer to format the entire drive. That is, delete the files in the entire drive.

How to format the files inside the drive.

Hello, first of all, the Wenlu family pieces inside the drive can only be deleted, there is no formatting option. Secondly, the format option is pinned to the entire drive, you can right-click on Format in the partition list of your computer, format the entire drive early. That is, delete the files in the entire drive.

Fart. No, I'm speaking according to the facts. You can think of formatting as one-click removal.

On the ** bridge roll, the CD disk inside is operated like this. If you're referring to an optical drive, then the optical drive can't be deleted, it's not formatted, and the disc is a one-time write-poor and can't be deleted.

Is that understandable?

Step 1. When your computer's hard drive needs to be formatted, remember to back up all your files because your computer's hard drive spike is formatted and all the data will be deleted.

Step 2. Enter the BIOS (Basic Input and Output System) settings to the system.

cd-rom

Drive to boot the system.

To do this, restart your computer and press the "Delete", "F2" or "F8" key.

In the BIOS menu, go ahead of the BIOS function, then you can make a CD-ROM or.

***-rom

Boot the first and second boot hard drives. Press the F10 key to save the configuration and finish, press the "Y" key to exit.

Step 3. Insert the operating system CD into the CD-ROM drive or ***-ROM drive and boot the system.

You will see a series of instructions to follow to start from the CD.

Follow the instructions for Windows Installer.

Step 4. Format the hard drive through a computer management program.

Click on the "Start" key, "Settings", click on the "Control Panel" icon and you will see on the screen.

From the Control Panel menu, Computer Program Management.

Click on "Disk Management" and select the hard drive that needs to be reformatted.

Right-click on the selected hard drive and select "Format".

Step 5. By formatting the floppy disk of the hard drive.

The floppy disk that will be used should be bootable and can boot in MSDOS mode.

During the boot process, the calculation guesses that the machine will be in DOS mode.

Type the syntax "format."

c:", or orange silver depending on what the letter, the location of the hard drive and need to be reformatted.

In addition to the above methods, you can directly use the GHOST system CD, set the first boot item to a CD-ROM drive, and then choose to enter the PE system, and then you can directly format all disk drives in the PE system.

Steps:1Start your computer and hold down the Del key until the BIOS setup window appears (usually with a blue background and yellow English text).

2.Select and proceed to the second item, "BIOS."

Setup. Find the item or group that contains the word boot, and find the three items in order: "first", "secend", and "third", which represent "first start", "second startup", and "third startup" respectively. In this stool, we can set it to "optical drive", "floppy drive" and "hard disk" in order.

If you don't see these three e-texts on this page, usually the option menu on the right side of boot is "setup", then press enter to see) should select "first" and hit enter, and select cd-rom in the submenu that comes out. Press enter again.

3.After selecting the startup mode, press the F10 key, the E text dialog box appears, press the "Y" key (can be omitted), and press Enter, the computer will automatically restart, proving that the changed settings have taken effect.

The second step is to run the XP installer from the disc to repartition and format the hard drive.

Put in the XP installation disc before rebooting and press enter when you see the word CD appear at the bottom of the screen. Otherwise, the computer will start reading the hard disk, that is, skipping the light to start from the hard disk.

After the xp system disk is opened, there is a blue background installation interface, at which time the system will automatically analyze the computer information, no operation is required, until the display screen turns black, and then the blue background Chinese interface appears.

At this time, the first thing that appears is the protocol of the XP system, press the F8 key (which means agreeing to this agreement), and then you can see the information list of all partitions of the hard disk, and there are Chinese operation instructions. Select the C drive, press the D key to delete the partition (remember to back up the useful files of the C drive first), the location of the C drive becomes "unpartitioned", and then press the C key to create a partition in the original C drive location (that is, the "unpartitioned" position), the partition size does not need to be adjusted. You can also adjust the size by yourself, and then the original C disk position becomes the word "new unused", press the enter key to continue.

Next, the Format Partition Options page may appear, and it is recommended to slide and select "Format Partition with FAT32 (Fast)". Press Enter to continue.

Repeat the above method to delete other partitions, or delete them all, and re-plan the space.

You can search on the Internet, there are a lot, generally with a driver, and a detailed description of Hu Zheng (system introduction and installation of pants file Songming),**After coming down, remember to verify whether the MD5 value is the same as the original version of this system, the same is that it has been modified and repackaged, this kind of must not be used, there is potential danger, the original MD5 value can be checked on the "official website" of the corresponding stupid limb, such as the rain forest wood wind system to check in the rain forest wood wind forum!

Must be formatted.

It may be that the partition was not formatted when it was created. Therefore, before using it, it must be formatted1, open my computer, you can see the hard disk that has been partitioned but needs to be reformatted2, right-click the drive letter of the hard disk that needs to be formatted, the following menu will pop up, click Format3, the pop-up menu, the red box in the recommended check, can greatly shorten the time required for formatting. For the green box, it is recommended to use the NTFS format for hard disks, while FAT32 format is recommended for ordinary USB flash drives.

The main difference between the two formats is that the former is capable of saving a single file larger than 4 GB, while the latter is not. When you're done setting up, click Start.