CPU Z test 2160 error

Normal, MO stepper E2160 has automatic frequency reduction technology, your computer will reduce the frequency when processing low tasks, save energy and mute, and increase the frequency to when needed. You can try to find a larger file and compress it into a winrar file to see if the CPU clock speed is increased.

It's not normal for the hard disk to squeak, it is generally covered by the CPU fan or graphics card fan, if you can hear it, it is not louder, it may be the previous double-disk hard disk, the normal Seagate 160G, 250G are single-disk, very silent, you can only hear the sound of the CPU fan, you can't hear the sound of the hard disk.

Intel Pentium Dual-Core E2160 (Case).

Merchant**: 385 to 555

CPU series: Pentium E

Number of cores: Dual cores.

Frequency (MH: 1800MHz.)

Bus frequency: 800MHz

Slot type: LGA 775

L2 cache (: 1MB.)

In the end, whether he was deceived or not.

It's best to see it live.

Change the new version of CPU-Z to see, or check in the system properties, sometimes the old version of CPU-Z will indeed show an error, the hard disk will ring, just see if the sound is abnormal, squeak should not be counted, anyway, it is warranted, not afraid.

Judging by the description, Solv may be a phenomenon of AMD's Cool & Quiet function, when the CPU load is low, it will automatically reduce the tremor frequency to 1GHz, and the memory will also become 200MHz. When the load branch leaks up, it will return to its original state.

Dude try to redo the system (I'm talking about the full order: use MHDD to detect the hard drive - no problem and then repartition with DM or PQ - install the system), and then change the version of CPU-Z detection.

It's the first time I've heard about the fact that the CPU can still enter the system after a problem, and I'm skeptical.,So I advise my brother not to doubt this CPU easily.。

Generally, it is easy to run the program after the failure of memory and hard disk, and of course, when there is a network, network problems should be considered.

No way... More than 2 o'clock?? Did you try a different version?

Or try Intel's own testing software called Intel Processor Recognition Utility for Windows ! The official website has the following !

Go into the BIOS and see, that one is the most accurate.

Also, everest can be tested.

If the test is not accurate, don't worry too much, if the voltage is not right, your CPU will not work for a long time.

Use ASUS's own test software to test the following, it seems to be called ASUS or Pro.

It is recommended that you try it with other software.

1. All you have turned on CPU energy saving, it will automatically reduce the frequency to 200x6=1200MHz when idle, and return to the theoretical value when it is fully loaded. You can turn on CPU-Z, run Super Pi, and you'll see the value change.

Big brother, it would be nice to change to a new version.

By the way, in addition, the CPU of E2160 and above versions will automatically reduce the working frequency when the system is idle. , so it's normal.

Core motherboards automatically adjust the frequency according to the machine load to reduce power consumption.

DDR, DDR2, DDR3 memory is 2 times the original memory, marked 1600,800Their actual memory is divided by 2.

The test with cpu-z shows that it is its raw memory, and you multiply it by 2 isn't it 1600 cpu-z shows the original actual memory inside,

1600 The memory frequency is 800 The quality of the Guangwei strips is average, and the brother doesn't want the light map to be cheap.

Recommend me a barbecue software to check the stability of your computer's hardware???

Memory and other chip industry itself its manufacturer conversion method is different from the calculation method of the number of software terminals, generally speaking, in that is, 993MB) can be counted as qualified, if you want to know more about it, you can communicate, your socks are limited to 100 words.

Maybe it has something to do with the memory brand.

No problem, you know too little.

GPU generally has several frequency bands, you this is the frequency of the graphics card in the low-power standby state, of course it is low, no, you run a big game to try, the frequency immediately increases.

In addition, the graphics card is GPUZ, professional.

You check it out next GPU-Z and send it to you.