Maverick 2 mobile signal is not good, how many people feel the same way

hi！Hello, in the environment of poor network nearby, the mobile phone will frequently search for available networks, it is recommended that you set the network standard to the operator's corresponding standard in Settings - More - Mobile Network. If the phone system is not the latest version, it is recommended to upgrade to the latest version.

If none of the above methods can solve the problem, you can choose to contact the nearest nubia official after-sales customer service center (click on the query address.

Hello,Maverick2 is to support mobile Unicom Telecom 3G full Netcom,The main photo,It does not support 4G network,If there is a problem with the signal,You can choose to contact the nearest nubia official after-sales customer service center (click to query the address)

Inspect and repair your phone.

At present, Nubia has launched a new series of mobile phones, the Z7 series, with dual SIM dual standby dual 4G and support 3G full Netcom. And on the basis of the previous focus metering separation、Independent white balance has added electronic aperture、Slow door、Manual focus and other more DSLR camera camera photo functions,Up to 20 minutes of ultra-long **The addition of the ultra-long ** time makes the Nubia mobile phone shoot star track、Nebula has become a reality,Nubia Z7 series can shoot stars of the full Netcom mobile phone。

At present, all Nubia Z7 series mobile phones are open for purchase, no need to make an appointment to buy, buy directly, welcome to the official website of Nubia.

Nubia Tmall***Official***Buy.

So why is the signal so poor on expensive mobile phones?

(1) Most of the rural areas are in a wide area and the height of the buildings is not high, so the signal is not good, the main reason is that the number of base stations of the operator is small. Adding a base station can solve the problem.

2) The construction of a relatively dense large community, the indoor signal of the low floor is not good. The reason is that the building blocks the signal of the outdoor base station. Solution: A reasonable 10086 complaint can be made to see if the operator has a way to solve it; Purchase telecom-grade signal enhancement equipment to solve the problem (the radiation is small, there is no interference with the operator's network, and it will not be investigated and dealt with by the committee.)

3) The high-rise signal in the urban area is not good and cannot be called. The reason is that the call of the mobile phone needs to determine a stable base station for contact and assign a channel to make a call. The signal strength of the main base station must be 2 times higher than that of the other base stations.

The basic construction height of the mobile base station is about 8-10 floors, if you are on a floor far higher than this height, you can see a lot of base stations, a large number of base station signals can be transmitted to your mobile phone through wireless means and the strength of the signal is about the same, the mobile phone can not distinguish which is the main base station, so the mobile phone is constantly distinguished, resulting in the mobile phone can not talk or intermittent calls. Solution: It is recommended that operators build an indoor distribution system in the building or install telecom-grade signal enhancement equipment to enhance the signal of a certain base station in some areas of the upper floor, and suppress the signals of other base stations.

Hello! Mobile companies must have the responsibility to deal with this problem, the mobile company has a special network optimization department, and there are many third-party optimizers working for it, according to the situation you described, it must be that the base stations around your area must have poor coverage, or lack of base stations, resulting in poor signals for all users around, and they must give 10086 to call **, they have special personnel to deal with complaints, and ask them to add repeaters or remote stations in your area to enhance signal coverage.

1. Change the mobile phone for testing, if it can be used normally, it may be that there is a problem with the mobile phone, you can contact the mobile phone after-sales consultation;

2. If there is still no service after changing the mobile phone, it may be a problem with the SIM card, and you can bring the card to the nearby business hall for testing.

3. Consult others around you if there is this problem, if there is the same problem, it is a fault in the local network, you can call the local 10086 feedback optimization.

After they determine that there is a problem with the signal, they usually do the signal distribution on site two or three months later, and then turn on the signal distribution equipment one month later. Of course, this is only normal time. The time period is usually longer than this. If you have a large number of mobile phone users, the resolution cycle time will be shorter.

This situation is in various places, it is more common, some residential floors are a little higher, or relatively dense, there will be such a situation in the room, various communication companies can not ensure that every corner of the signal is full, but in this case, on the one hand, to the mobile company reflected, on the other hand, you can see if there is a relatively large or powerful unit or company nearby, by the ** or the company, or VIP customers to reflect the problem, more convincing than the individual, If this phenomenon is more widespread or has a large number of people in your area, you can go directly to the local mobile company and say, if the signal problem continues to be solved, you will all change to another communication company's number, so that they can be more noticed. If you don't try it, it might work.

If you have a lot of mobile phone users in your area, you can collectively ask Mobile to install a cell tower, and Mobile will consider it according to the situation of the local mobile phone users.

China Mobile should have been acquired by China Telecom and Unicom, the signal is too poor, there is no signal at all in the countryside, and it is intermittent in the city, and the communication fee is the highest.

Hey, same question 1!! I'm also angry!!

All reflect the recent poor signal of the movement.

Is it? Is it the most recent one? Hasn't it always been?

Are both 2 mobile, or are both 2 connected? If one is connected and one is mobile, it is normal, because the signal strength of China Unicom and China Mobile is not the same in the same place.

Is the card signal bad or the card bad? After figuring it out, change the two cards and use them If it doesn't work, there is a problem with the phone

Dual-SIM dual-standby mobile phones are equivalent to two mobile phones integrated together; What parts are double; Your machine may be that the route of the card is broken; It should be repaired; I'm a mobile phone fixer, and I've fixed a lot of problems like yours.

Hello! This kind of problem involves the motherboard wiring problem; It's more cumbersome; The key depends on how you are causing this problem; Whether it fell or got into the water, or used well, suddenly broken, etc. Therefore, symptomatic repair is also easier to repair; It also depends on who cultivates; If the technology is not good, not only can it not be repaired, but it also makes a mess of the inside of the board; ** I hit the most expensive no more than 100 fast; If you exceed it, it will be expensive; You refer to it.

In the wilderness, natural scenic spots, elevators, underground parking lots, heavy rain and bad weather, under highways, mobile 4G signal is very bad, or even no signal.

It can be seen that when you move, you don't believe it.

Your location is far away from China Mobile's 4G base station, or China Mobile's 4G cell tower has a problem, etc., which will cause China Mobile's 4G network signal to be poor.

Solution: 1. You can try to remove the shell to see if the signal strength of the mobile phone will improve.

2. If the mobile phone does not have a metal shell, or there is no shell at all, then you can try to restore the network settings of the mobile phone, this method can rule out the reason for the mobile phone system. (Settings - General - Restore - Reset Network Settings).

3. If the above two methods are not the cause of poor mobile phone signal, you can try to replace a ** card and use the replacement method to queue up the fault. If the signal strength is normal after replacing other ** cards, it means that the current ** card is a problem. Please contact your mobile** carrier for card replacement.

4. If the above methods are invalid, it means that it is a hardware problem with the mobile phone, and it is recommended to send it for repair.

Causes and solutions for weak signals:

1. If the software is set up, it is recommended to turn on the GPS Enhancement Auxiliary Posture Assistant" and "Network Positioning" stool.

2. It is related to the system of the mobile phone itself, and it is recommended to update the mobile phone system.

3. Because of the weak signal caused by the metal phone case, it is recommended not to use the coarse Zheng metal phone case.

4. If the hardware of the mobile phone is damaged, it is recommended to go to the after-sales service for inspection and repair.