How to find a point in semi trailer reversing, and what skills are there in semi trailer reversing

1. Before reversing, adjust the front and body of the car, try to keep the front of the car and the trailer straight, or the front of the car is tilted to the side of the target parking space, and then operate according to the basic method

2. Turn the steering wheel right and reverse to the target position. When the car is stopped, turn the steering wheel to the right all the way. Relax the brake pedal slightly and reverse with the semi-trailer creep function. The left side of the vehicle stops when it reaches a point where it extends in a straight line.

3. When you fall to the left, you should hit the steering wheel clockwise, and when you fall to the right, hit the steering wheel counterclockwise. When you see the right rear wheel of the trailer enter the parking space, you need to speed up the direction at this time, let the body return to the right as soon as possible, and pay attention to the left wheel of the trailer.

4. Move the car closer to the right, hit the steering wheel of the semi-trailer to the left to the end, and slowly retreat; Before the vehicle is parallel to the shoulder, turn the direction to correct the vehicle and stop the vehicle parallel to the shoulder (semi-trailers are large vehicles, so be careful when parking and do not collide with the vehicle behind you).

Semi-trailer reversing backwards are in the opposite direction, and when reversing to the rear, you must first feel the sense of separation and direction of the car, this is very important, in a reversing time, be sure to look at the reversing mirror (because we can only see one side of the reversing mirror can not see both sides, but also look at the left reversing mirror) or the instructions of the person who commanded the rear, I will tell you about my experience of reversing to the rear, for example, you are now reversing to the right, you as the front of the car, It must be the direction of the left side of the hit, remember to see the right rear foot and the road interspersed interspersed space, the beginning of the time do not kill the direction, the semi-trailer is also while reversing the correction, looking at the right rear foot of the carriage into the street, this time in the direction to play faster, as soon as possible to let the body to the right over, remember this time to think about the left side of the rear corner, if a can not pass, it is best to be on the top, in the backwards, it doesn't matter, the same is the timing of the driver to understand, even if others are urging do not be anxious, Calm down and gradually reverse, safety first, the mood noise will affect your reversing, when reversing to the rear, when the rear body is slightly deviated to the right, that time is in the wheel, the body or the front of the car are right.

How to find a semi-trailer reversing? It's like how to learn to walk! Hengyi semi-trailer reversing can't be your problem!

Semi-trailer reversing to find a way:

1. The semi-trailer and the adjacent car side by side confirm that the distance between the adjacent car is about 1 meter, and the rear safety is confirmed to reverse in a straight line, and when the rear bumper of the vehicle is side by side, the tense rolls and stops;

2. Turn the steering wheel right and reverse to the target position. When the car is stopped, the steering wheel is hit to the right to the end, the brake pedal is slightly relaxed, the semi-trailer creep function is used to reverse, and the left side of the body reaches a certain point when it extends to the straight line;

3. Turn the steering wheel left to make the tires return to the right and then reverse. When the car is stopped, turn the steering wheel to make the tire right, slowly reverse in a straight line, and stop reversing when the left rear wheel reaches the white line outside the parking space;

4. Approach the car to the right, hit the steering wheel of the semi-trailer to the left to the end, slowly retreat, before the vehicle is parallel to the shoulder, turn the sail to make the vehicle right, and park the vehicle in a position parallel to the shoulder (the semi-trailer is a large vehicle, and it should be carefully rubbed when parking, and do not collide with the rear car).

Those who have passed the second subject will feel that reversing into the warehouse is the most difficult of the five items. Even if you practice very hard and diligently, it is easy to make mistakes in exams. That's because you haven't mastered the art of reversing into storage. Then let's talk about the skills of reversing semi-trailers.

1.Confirm that the semi-trailer and the adjacent carriage are side by side, and the distance between the adjacent carriages is about 1m. After confirming the safety of the rear side, when the rear bumper of the vehicle is brought together, the semi-trailer will go straight and go back and stop.

2.Turn the steering wheel to the right and reverse to the target position. When the car stops, turn the steering wheel to the right. Easily open the brake pedal and use the crawling function of the semi-trailer to reverse. When the left side of the car reaches a certain point on the line that extends straight to the point of the war, it stops.

3.Turn the steering wheel to the left and reverse with the tires aligned. When the car is parked, turn the steering wheel to align with the tires; Slowly go back in a straight line and stop reversing when the left rear wheel reaches the white line outside the parking space.

4.The car moves closer to the right, hits the steering wheel of the semi-trailer to the left, and slowly retreats; Before the vehicle is parallel to the shoulder, turn the vehicle back to the right and park parallel to the shoulder (semi-trailers are large vehicles, so be careful not to collide with the vehicle behind you when parking).

The formula for semi-reverse abilities is:

1.When a semi-trailer is reversing, the steering wheel turns in the opposite direction to the bicycle.

2.Reduce your speed when making sharp turns in road conditions.

3.When turning left, rush out of the tractor from the front outside of the semi-trailer.

4.When turning right, the inside and rear of the semi-trailer are close to the road centerline.

5.Don't be in a hurry when reversing to the back. Be sure to look in the mirror to find a good car's sense of distance and direction.

Millions of car purchase subsidies.

1. Enter the freight yard and drive close to the parking space.

2. After the front of the car is flush with the parking space, drive to the left front.

3. After the front of the car and the trailer form a straight line, prepare to reverse.

4. Turn the steering wheel to the left, reverse to the right rear, and observe the distance angle from the right rearview mirror.

5. Adjust the angle while reversing, and pay attention to the left rear corner of the trailer.

6. After most of the trailer body enters, prepare to return to the positive direction.

7. Return to the right direction and complete the reversing. If not, adjust it appropriately.

1. Reversing is not always in place at one time, and it needs to be adjusted to a position to get in. It's like a bicycle. The bicycle only needs to adjust the angle position of the whole vehicle.

2. The semi-trailer needs to adjust the angle position of the trailer with the warehouse, adjust the angle of the front and the trailer, leave the position of the head of the car, and the reason why the trailer can not get in. There will be an adjustment when reversing.

3. Not every right-angle reversing is a time to go in, a preliminary position is needed to adjust the optimal storage angle position, this adjustment collapses different bicycles, the bicycle steering wheel can be killed left and right when the car is stationary and ready to punch the finger, the angle change between the semi-trailer main car and the trailer requires a process, this is the difficulty of adjustment, when reversing, not the exam is a regular dead imitation formula to can have a reference, the actual reversing blind spot is large. It's all about letting others go in first, and then adjusting it, and some places can't go in at once, and the minimum turning radius can't be formed at one time.

The tips for reversing a semi-trailer are as follows:

1. The semi-trailer and the adjacent car side by side confirm that the distance between the adjacent car and the adjacent car is about 1 meter: after confirming the safety behind the vehicle, reverse in a straight line, and stop when the rear bumper of the vehicle is side by side. 2. Turn the steering wheel right and reverse to the target position.

When the car is stopped, turn the steering wheel to the right all the way. Relax the brake pedal slightly and reverse with the semi-trailer creep function. The left side of the vehicle stops when it reaches a point where it extends in a straight line.

3. Turn the steering wheel left to make the tire return to the right and then reverse: when the car stops, turn the steering wheel to make the tire right; Slowly reverse in a straight line, and stop reversing when the left rear wheel reaches the white line on the outside of the parking space.

Precautions for driving a semi-trailer:

When turning, pay attention to whether there are pedestrians in the blind spot of the viewing angle, especially those riding battery bikes, which appear suddenly and silently. Always check your tires before you travel. When reversing, the direction is reversed, to play slowly and slowly, the amplitude should not be too disturbing, and the eyes and ears should not panic.

If you go far away, it is necessary to check the vehicle, including: the vehicle's half-shaft screw drive, screw puller, horn light, tire pressure, these are the must, and the place where the accident is more likely is these points.

Do not use the practice of "leaving first and then braking" to run in the brakes. Although this can relatively reduce the impact on the engine when braking, it can be dangerous, and it is even worse once the habit is formed.