How the innovative Aurvana X Fi headphones work with the sound card

Halo: In this day and age, it must be the best idea to have your own things with your own things. = The Aurvana X-Fi headphones already have sound quality enhancement hardware support inside. The sound card is generally integrated, and this headset is generally not bought by enthusiasts.

The innovative digital flavor is too heavy, and it is all improved with sound quality.

If there is a good sound source, this function is equal to useless.

I checked the information:

450 ohms (noise cancellation on), 72 ohms (noise cancellation off), 105dB MW (noise cancellation on), 95dB MW (noise cancellation off) This shows that this headphone must be amplified to push well (even if noise cancellation is not turned on.) ).

And the noise cancellation function is actually. How to say it. Noise-cancelling headphones themselves are all about canceling out noise with noise.

This can be illustrated with a very simple analogy: sin +cos =1Assuming that SIN is the noise of the outside world, then the headphones will create the noise of the COS to cancel out the noise of the sin.

Therefore, the noise reduction function has some resistance effect on the sound quality, and it is recommended not to turn on the noise reduction function in general. However, when the noise cancellation function is turned on, it is generally in an outdoor place (very noisy)., and in outdoor places, you generally use mobile devices, so you have 2 choices, either buy a portable headphone amp (buy a one, you can buy about 800) to take with you, or don't take it out.

What's the problem, hehe.

This headset should belong to the innovative top-of-the-line headphones, if you want to match the sound card, it is better to use the innovative X-Fi series. You can check it out on the official ** of Innovation. If you have something to do, you can communicate with him.

People He Ye, those AKG Q701 HD650 can be in the ** device in the mountain pat chong interview, try to choose the channel of the ASIO, listen to the power amplifier drive is more stable. There are more functions to change the board. It's up to you.

Those who like torture will revise those who are funny. If you want to be stable, just the official version.

It's a general card in itself.,The effect is naturally not better**,But according to your description,It seems that the sound is not normal.,It is estimated that it is not set up.,After you install the official driver,Check whether the output is headphones in the control panel,You can also output the power amplifier of the channel。 Or use RCA to convert output and set it as a speaker.

Because your headphones are 4-section, this sound card jack is 3-section. Buy an adapter and you're done.

Your sound card is for listening to songs, and it's for singing, and it's just plain reverberation, and there's no special tuning unless you're connected to a VST rack.

X-Ficrystalizer is an innovative sound card with a sound card effect treatment.

X-Ficrystalizer can restore the sound details lost during compression through its optimization algorithm to achieve CD sound quality.

Shocking game sound! It can enhance the sense of space and three-dimensionality.

The first thing you need to do is to disable the sound card in the Device Manager, your microphone has no sound, I guess your KX plug-in is not fully installed, or there is a problem with the wiring diagram of the mixer, you should check carefully.

The level of your sound card is not recommended to be paired with headphones above 1000 yuan. If you listen to a lot of popularity, then go straight to the American Goethe SR60i, which is the most cost-effective. Warm and vivid midrange vocals, solid low ends. The most award-winning American audiophile entry headphones.

Do you want to monitor your headphones? This price is probably ISK 2010 this model, which is more suitable for ** monitoring, and the entry is cost-effective.

1 AD Link interface.

This is a 26-pin connector. Connect this interface via one end of the AD Link cable and the other end to the corresponding interface on the X-Fi IO controller. (The X-Fi I-O controller is a large, external, professional controller that is about the size of an average home *****.)

There are a variety of interfaces and control buttons on it).

2.Line output 3 jacks.

For the system, the front** and the subwoofer.

For the Bright Sail system, talk about front**, subwoofer and rear** for this.

For the system, front**, subwoofer, and side-left.

3.Linear output 2 jacks.

For1 and system, backward-left and post-right. For the system, it is back-left, back-right, and side-right.

4 linear outputs 1 jack.

The main channel, i.e. the front-left and front-right output interfaces. It is also a stereo headphone jack with a mm plug.

3-in-1 functional interface with microphone input, linear input, and digital IO connection. The devices that can be connected are as follows:

The Maison key touches the wind.

Digital IO module.

An external digital audio device that receives a stereo PCM or a compressed Dolby Digital DTS bitstream from the S PDIF output.

<> ginseng stool liquid traces dates and bury them to see it.

Recording, if you want to achieve good results, there is still something missing.

Ignore the sound quality of the ISK microphone itself (microphones under 4000 yuan are not good), but at least you need a better one to put it, right? Without a good point, it is difficult to adjust the sound to a good sound, because it is difficult to grasp the output level, which is very difficult in post-production. In addition, your innovative sound card can not be used for recording, regardless of the signal-to-noise ratio, sound restoration ability, and recording accuracy can not be compared with professional audio cards, nor can it meet the requirements of recording, your sound card is a multi-application sound card, and it is also a more professional multi-application sound card.

Therefore, according to your existing configuration, on the premise of not changing the recording microphone, you also need at least a professional mic amplifier and a professional audio card, if you need to make a good effect, the recording environment is also very important, you need to make a good sound field, at least there can be no echo at the recording site, let alone noise, the sound from your computer laptop fan is noise, and other greater noise can not be had. All of the above has a big impact on the final result. In addition, in post-production, I don't know what kind of monitor headphones you use, the output effect is also very important, it is best to have a good professional monitor speaker, if you want to save a little, at least with a professional monitor headphone, if your headphones are also domestic, then it is recommended that you change a monitor headphone, recommend AKG's K240, ** relatively cheap, the effect is also good, basically can meet the requirements.

Recommend ISK960B monitor headphones, ear pack type, it was 90 when I bought it, and now I don't know that you can buy it in ******, beware of fakes.

The characteristics of the diesel-electric hybrid are that the electric motor is used in the vulgar congestion, avoiding the most fuel-consuming section of the traditional internal combustion engine during congestion, and the internal combustion engine charging the battery during normal driving and accelerating at full speed