After an unexpected interruption of the installation, the computer cannot complete the self test and

The system is broken, press del to enter the BIOS when booting up Advanced BIOS Features

Go to Modify the First Boot Device to CDROM to boot the optical drive.

It should be that the BIOS is broken, and the DMI information is stored in the CMOS.

Try a different motherboard battery.

After entering the BIOS, set the boot order.

There is also this situation when the static electricity is large when Anyou fights, so try to discharge the coms first!

If it doesn't work, you can find a test card to test it, and you can't completely rule out the problem of the main shirt and auspicious board!

If there is an integrated graphics card on the motherboard, just unplug the graphics card and try it.

The old memory sticks should be wiped with an eraser or alcohol to wipe the gold finger!

There are three problems with this, one is that Brother Xin leaks memory, the machine that has just been set up, is not plugged in well, and it is easy to have something on the gold finger Zhao Cheng This problem.

The second is the motherboard, if there is no problem with the internal dust brigade, the motherboard will definitely slide and rot the inspection, and the third is that the CPU but the probability of the CPU being bad is very small,

The keyboard light is on, change the graphics card to see if it doesn't show up, it may be a problem with the graphics card slot of the motherboard.

Unplug the memory Wipe the source cong to wipe the gold finger plug in It still doesn't show up Pick off the motherboard battery Use a sharp tool to restore the BIOS and install it It's not okay Bantan Sakurako asked the crack sensitive question.

See if the graphics card or memory contacts are good.

DiskGenius software is used to detect and repair partition table problems, but to detect hard disk bad road people still like MHDD, if there is a pink shirt noisy color and red display when using it to detect, then your hard disk should be used more carefully, it is best to back up the data, so as not to damage the individual.

I don't know if your hard drive still has a warranty? If you have to touch the sails, it's easy to do.

If the bad sectors are not in the initial 20G range, but are concentrated in 63% or the span is not large, then re-divide the area and block the bad sectors can still be used for continuation or annihilation.

No way, the hard drive is scrapped.

Looks like you're just going to have to change your hard drive.

Judging from your screenshots,The information of the memory is not displayed completely,You try the memory module in a different slot,If it doesn't work,Then the motherboard naked test,If the motherboard naked test can pass,Then you look at the memory module and the memory slot,If the naked test can't pass,Then you make your own idea。

Hard drive boot failure, check your hard drive.

:q21;Can I boot the computer with the original system installation CD? View the original post

This is a hard disk self-test, repair function.

After entering the system, perform the following operations:

Start --- run Typing cmd OK to open the Command Prompt and enter it inside.

d: Enter.

Then enter chkdsk f enter.

When prompted, enter y.

You'll be prompted to restart the next time you restart the automatic repair.

Just restart the computer, and a blue interface will appear again (there are numbers jumping, don't move the keyboard, let it scan it automatically.)

Once you are in the system, defragment the disk.

Just reboot again.

I guess your computer is ready now.

This is the boot hard disk detection screen, and it will pass after a while.

Or press esc when this screen appears to skip over.

You this is the system file loss repair interface, after rebooting the boot keeps knocking enter.

Until you enter the interface, or wait for him to complete the automatic repair.

The blue screen is the computer's self-protection, because the system has a problem with it. Look at the screenshot above where the computer is detecting the hard disk information by itself, just wait for the detection to be completed. I guess it's going to take a few minutes.

Just wait patiently for half an hour, or turn it on and get some sleep.

Have you reinstalled it with a USB flash drive? It stands to reason that there is no need to buy it again.

It's a blue screen, let's buy it again!

When this interface appears, click ESC to skip, then enter the desktop to open my computer, find the D disk, and then right-click the properties, tools, start checking, check the automatic repair of file system errors, and then click Start, if prompted to restart and select no, if the above can not be solved, you must enter the windowspe system to repeat the above operations, and then you can only format the D disk.