The motor of the bucket just can t be brought up

If the motor is humming but not spinning when the washing machine is doing laundry, it may be a problem with the starting capacitor. If there is no sound from the motor, it may be that the lid linkage switch of the dehydration bucket is faulty.

Check that the belt is loose, check the pawls and clutch to see if the brakes are tight or if the mechanism plate on the drum cover is broken.

The automatic washing machine does not turn, hum does not turn, how to solve the problem that the motor is not rotating, some have a clutch, the motor is very hot, the starting capacitor may be broken, or the wire is off, causing the motor to not start, if there is no clutch, see if the motor is stuck, do not idle the belt first, the motor is stuck, whether it is stuck, if it is not stuck, most of the starting capacitors are problematic.

The dry tube does not rotate, generally in the following situations: the motor is burned out (there is no reflection when the power is on), the starting capacitor is damaged (the motor cannot be started after the power is on), the brake line is broken (the motor cannot be started after the power is on), the timer is damaged (after twisting and twisting, the timer has no ticking sound), the water seal is damaged (the water seal is damaged, the clothes are difficult to put the clothes until the official does not turn, at this time you can hear the sound of the clothes tube hitting), the line is open (generally visible with the eye).

The dehydration motor does not rotate is generally two possibilities: mechanical problems; The connection line from the cover of the dehydration tank to the brake fell off, causing the brake to not open; electrical problems; The capacitor of the dehydrated motor fails.

Check 2 places: whether the motor is flooded and the starting capacitor capacity is insufficient.

The common fault is: the brake shoe disc is not released, and the phenomenon is very difficult to rotate the dehydration bucket by hand, and the brake shoe is generally broken or falling off, which is easier to repair. The starting capacitor of the motor is damaged or the starting circuit is in poor contact, and it is easy to turn the dehydration bucket by hand, check whether the line is in good contact, replace the damaged starting capacitor, and it is best to find a friend with maintenance experience to help solve it.

The buzzing sound of the dry bucket but the inability to rotate may be caused by damage to the motor, brakes, and capacitors, you can first slide the capacitors, then check whether the motor is damaged, and whether the brakes are locked, and then check whether there is any foreign object stuck between the dehydration bucket and the washing cylinder, if so, remove it. If the dry bucket does not work, it is best to let a professional Wei Brother Banquet repair it, free of charge during the warranty period, and pay for the repair according to the charging standard outside the warranty period.

1. The starting capacitor is damaged. When the bucket is started, the capacitance of the motor is very important, if it is damaged, the motor will not start normally, and then there will be a buzzing sound, but the click can not turn up, to check whether the capacitor is normal, if not, replace the capacitor.

2. The motor is damaged. If it is used for a long time, or the dry barrel is always in a humid environment, its coil is easy to get damp and leakage, which will lead to motor damage for a long time, which will be more troublesome, and it is necessary to replace the motor or repair the coil.

3. The motor brake is locked or damaged. Before the spin bucket stops working every time, there will be a brake device on the motor, but if the brake is locked or damaged, it will not work normally when the spin bucket is opened again for the second time, and it cannot turn up is one of its specific manifestations.

4. Foreign objects are stuck. If you accidentally drop something, it will jam the dry bucket and cause it to rotate slowly, and you need to clean up the foreign body and remove the spin bucket to return to normal rotation.

5. Other issues. In addition, there are also balance ring problems, the flange is not fixed or faintly broken, the bearing is loose or the wear is more serious, etc., which will also lead to the spin dry barrel can not rotate, for these problems need to replace the balance ring or flange and bearing.

The washing machine can not turn the dry bucket can be caused by many reasons, you can check it step by step:

1. Whether the contact of the spin-off timer is not in good contact. (Have the ability to adjust, if you don't have the ability, please replace the timer) 2. Whether the brake rope is broken or too loose to cause the brake shaft. 3. Most commonly, the motor starting capacitor is damaged. (Just change it).

Three possibilities:

1. The starting capacitor of the motor is out of capacity (the capacity becomes smaller or gone), or it is completely damaged.

2. The starting winding connection line of the motor is broken, or the winding is burned out and broken.

3. The motor bearing is rusted or stuck.

First of all, see whether the dry barrel can rotate flexibly, if it can, it proves that the bearing is normal. Check the capacitor and motor again.

If it is a new motor, the possibility of burning out the motor windings can be ruled out, and the capacitor can be replaced for trial operation (starting with the cheaper one).

1. The starting winding of the dehydration bucket motor is connected in series with a capacitor of about 4-6 microfarads to improve the starting characteristics of the motor. After the power of the washing machine is turned on, the motor of the dehydration bucket makes a "buzzing" sound without turning, which means that the capacitor fails, and it can be replaced with a new one.

2. Poor contact of the spin dry timer, the solution, the timer of the same model can be replaced.

3. If the dehydration motor has coil burning, wire breakage, interphase short circuit, turn-to-turn short circuit and other faults, it will not work normally. The main reason for the damage of the motor coil is that the socks are damp, which is mostly caused by the damage of the water seal bowl or the serious wear of the shaft jujube sleeve that causes water to leak into the motor coil. Solution, repair the winding motor of the household appliance or replace it with a new motor.

4. The buzzing sound of the spinning barrel does not rotate - the shaft sleeve of the dehydration motor and the shaft of the spinning barrel are locked, and the lack of oil between the dehydration motor and the shaft sleeve will lead to the locking of the shaft and the shaft sleeve. When the power is started, the shaft drives the shaft sleeve to form friction between the sleeve bowl and the shaft sleeve sheet, so that the dewatering bucket motor rotates slowly or cannot start, and the solution is to remove the shaft sleeve for lubrication or replace the shaft bowl with a new one.