How to choose the board of home building materials and how to choose the furniture board?

<> "How to choose furniture panels?

First, the practical cost of functionality. It is good to use environmental protection, but every part of the whole house has its unique attributes, so we try to take into account his use cost when choosing boards, such as solid wood boards for bedroom wardrobes, and particle boards for balconies to be waterproof and moisture-proof. The selection of custom furniture panels should be used in different zones to weigh the pros and cons!

Second, try to choose environmentally friendly plates, formaldehyde emissions should meet at 1 5mg Sun Dan L, that is, to meet the E1 standard, as the saying goes, a good body is the cost of eliminating Kai ruining the revolution, and after buying a house to decorate it, it is a lifetime to live, about health can not be sloppy, the choice of environmentally friendly plates is also good for your family!

Third, the last thing we need to consider is the overall design. The overall splicing effect of the corresponding pattern texture, color and thickness of different plates is also different, and the color is matched as much as possible, the cold and warm are consistent, and the bright match is matched. When you choose a plate, it is best to check it on the Internet, and go to the local store to compare more.

Tips for buying plates:

1. Look at the surface. The surface should be flat, without warping, deformation, blistering and depression.

2. Shake. Lift the corner of the board and shake it up and down to hear if there is a squeaky degumming or cracking sound.

3. Tapping. Tap the surface of the plate with a needle-nosed instrument, if the sound on the surface is crisp and clean, it indicates that the density is relatively high, if the sound is dull, the density is low, and there is no difference in the sound in each place.

4. Ask the tree species. There are many kinds of raw materials for plates, which require different processes.

5. Smell the smell. If the board emits a fragrant wood odor, it means that the formaldehyde release is less; If the smell is pungent, it means that the formaldehyde is released.

6. Check the report. The test report will clarify the standard, and there will be a national standard reference on it, including density, moisture content, water absorption, thickness, water absorption expansion rate, etc. in terms of physical properties, and the more it exceeds on the basis of the national standard, the better; In terms of mechanical properties, there are static bending strength, vertical plate tensile strength (internal cementation strength), nail holding force, elastic modulus and formaldehyde emission reference standards, etc. It is definitely a better choice that meets the national standard or even is better than the national standard.

Panels are flat, rectangular slabs of building material made of standard size, which are used in the construction industry as components for walls, ceilings or floors. It also refers to a metal sheet that has been wrought, rolled or cast. So, how should dried cuttlefish be preserved?

Let's go with me to find out!

Selection method:

Blockboard: good moisture-proof effect, can not be directly painted. The middle of the blockboard is a core made of natural wood strips, and a thin veneer is glued on both sides, which is one of the most important materials in decoration.

It can be used for furniture and wooden doors and door covers, heating covers, curtain boxes, etc., and its waterproof performance is good. When selecting, look at its internal wood, it is not suitable to be broken over the rock, and the gap between the wood is about 3mm blockboard. Due to the unsightly appearance of the wood grain exposed on the surface, it is rarely painted directly, and veneer plywood is usually pasted.

Furniture and other woodware made with it have to go through two processes: glued board and painting, and the cost is higher.

Integrated board: not easy to deform. This is an emerging solid wood material, which is made of high-quality imported large-diameter logs and is staggered like fingers.

Due to the different processes, the environmental performance of this board is superior, and it is 1 8 of the allowable formaldehyde content of blockboard. On the other hand, this kind of board made of solid wood such as American spruce can be directly colored and painted, which saves a process than blockboard.

MDF has a worse nail grip than particleboard. Particleboard is a natural wood crushed into granules and pressed into boards, which is the main material of cabinets at present. MDF is formed by pressing powdered wood chips, which has good flatness but poor moisture resistance.

In contrast, the nail holding force of MDF is worse than that of particleboard, and if the screw is loosened after tightening, it is difficult to fix it again because the strength of MDF is not high, so it is rarely used to make cabinets.

Veneer triple plywood: hassle-free and cheap. Multi-layer board, also known as plywood and plywood, the number of layers is different, and its advantages and disadvantages mainly depend on the raw materials.

Now the main veneer used in home decoration is trim plywood, that in the factory already will be very thin. The solid wood veneer is attached to the triple plywood. The Veneer Triplex is easy to use and inexpensive.

Notes:

First of all, it is necessary to see whether it is environmentally friendly, according to the regulations, the formaldehyde emission of indoor building materials must be less than or equal to milligrams per liter, if it exceeds 5 milligrams per liter, it is not up to standard.

Secondly, it depends on the moisture content of the wood, when the moisture content of the wood is higher than the equilibrium moisture content of the environment, the wood will dry and shrink, and on the contrary, it will absorb moisture and expand. The main cause of wood cracking and deformation is too high or too low moisture content.

Finally, don't just try to be cheap when buying, low-cost materials are usually shoddy and formaldehyde seriously exceeding the standard of materials, should be bought in the regular market, it is best to buy materials with Jian Zheng brand.

1. Look at the process: when selecting plate furniture, we should pay attention to the process of plate production, and drill holes to install connectors, wooden tenons, shelves and other accessories on board furniture, and we can observe whether the material of the plate is uniform, whether the arrangement is neat, and whether the color is unified from the drilling place.

2. Look at the color and gloss: from the surface to observe the plate, the surface of a good plate should be shiny, and the light can have a certain degree of reflection, giving people a metallic texture.

3. Look at the flatness: touch the plate with your hand, a good surface treatment of the plate is also quite excellent, the surface of the plate is smooth and smooth, and there is a smooth feeling when you touch it, without touching particles, dents or fingers have the feeling of being stabbed.

4. Look at the hardness: the plate should have a certain hardness, the hardness and strength of a good plate are also quite good, scratch on it with gravity or sharp objects, there will be no scratches, and the surface of the plate is smooth and clean.

5. Look at the trademark: the plates produced by regular manufacturers have the manufacturer's trademark, and the manufacturers of the noisy materials in Banchun Town will put their own logos on the plates produced by themselves, some are embossed, some are gravure prints, and we carefully look at whether there is an imprint on the furniture plates to identify the origin of the plates.

There are all kinds of plates when decorating, especially the material of the plate is very much, people always feel special questions when purchasing, before the decoration must master what plate is good for decoration, and then go to buy, and at the same time face many businesses on the marketHow to choose the decoration plate frontIt is also necessary to know, so that the decoration can have a better guarantee. Let's find out with us today!

First, how to choose the decoration plate.

1.If it is used for kitchen and bathroom and exterior bay window door casing, it is necessary to apply anti-corrosion coating on the back of the wood to prevent moisture vapor and moisture from soaking and causing moisture to return to moisture and bulge.

2.Due to years of exposure to the sun, considering that the paint may fade, such as white yellowing is unsightly, it is recommended to consider the color problem when designing.

3.In order to prevent the window cover of the external window from turning into a silver shape, it is necessary to choose a plate with a moisture content of less than 12%, and pay attention to the installation of the bottom plate firmly and the styrofoam filling densely during construction to prevent the wetting of water vapor and reduce the possibility of deformation and cracking of the window cover.

4.In order to prevent moisture, the door cover of the kitchen and bathroom should be sealed with sealant at the interface between the wood line and the wall tile. Share from Yuncheng Haode Wanli Decoration Materials City.

Second, what kind of plate is good for decoration.

1. The solid wood boards used in ordinary times are made of complete wood, which are durable and natural in texture, and are the best choice in decoration. However, due to the high cost of such plates and the high requirements of construction technology, they are not used much in decoration. Solid wood boards are generally classified according to the substantive name of the board, and there is no unified standard specification.

At present, in addition to the solid wood board used for the floor and door leaf, the board generally used is manually processed wood-based panel, which is easy to adjust and operate, and is easy to achieve comprehensive computer control and automatic production.

2. Plywood is also known as plywood, and it is commonly known as fine core board in the industry. It is made of three or more layers of one-millimeter-thick veneer or sheet plate glued and hot-pressed. It is currently a commonly used material for handmade furniture.

The splint is generally divided into six specifications: 3 centiplate, 5 centiplate, 9 centiplate, 12 centiplate, 15 centiplate and 18 centiplate, which can be produced in rolls and is used in large quantities in the national economy, so it is necessary and able to achieve high-speed continuous rolling production.

3. Decorative panelDecorative panel, commonly known as panel, is a decorative board with single-sided decorative effect made by precision planing solid wood board into thin veneer with a thickness of about one, using plywood as the base material, and making it through adhesive process. It is a special way in which the splint exists, with a thickness of 3 cm. In addition, the control of product width, thickness, dimensional accuracy, plate shape and surface quality has become difficult and complex.

The above is a detailed answer on how to choose the decoration plate, I don't know if you are satisfied with our introduction.