What to do with the floor after it has been soaked in water? What to do with the floor after it has

First, after all, post-rescue is passive, and taking precautions is the best choice. Usually, pay more attention to the window not to open wide to prevent rain; When you go out of the bath and enter the bedroom, you have to change your shoes; Always check the air conditioner, plumbing pipes, and washing machine for water leaks. At present, the floor wax mainly plays the role of cleaning and maintenance, can not be waterproof soaking, the best preventive measure for soaking in water on the wooden floor is to use the floor protection film, it has a long service life, no damage to the floor, and also saves the trouble of changing shoes at home.

2. If it is a small area soaked in water, it is recommended not to pry up the floor to dry, which is easy to cause hard damage to the floor, and it is likely to cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor to expose the expansion joints, which usually take about three to ten days to dry out, depending on the amount of seepage.

3. If the wooden floor is soaked in water, the surface water on the wooden floor should be sucked dry in the shortest possible time. At the same time, take a vacuum cleaner to absorb water vapor in the splicing gap of the soaked wood floor, or take a hair dryer to dry it with cold air, but never use hot air to blow it to prevent the surface from drying and drying the surface.

Fourth, if it is a large area of soaking water, you should notify the after-sales service office of the wooden floor in time, and try to keep the wooden floor not deformed under the condition of carefully priing the wooden floor, according to the "well" shape superimposed in the ventilation place to dry, with the weight generated by its stacking to prevent the occurrence of deformation, pay attention not to be exposed to the sun, under normal circumstances, for the quality of the solid wood floor can be used again.

Fifth, the wooden floor that has been soaked in water warping and deformed, it is best to replace, it is not recommended to plane the arched part, and then repaint the treatment method, because after the arch part is planed, repainting will lead to inconsistency with other board colors, and the thickness of the whole board is uneven, the force is different, and it is easy to appear pits.

What to do if the wooden floor is blistered.

If the floor needs to be partially replaced, it is necessary to inquire about the inventory and batch of the floor to be replaced before the worker comes to the door, and use the floor with the same color and specification as the original floor, otherwise the effect will be very unsatisfactory.

1. Remove the baseboard to expose the expansion joint: If the floor is partially flooded, first clean the surface water, then remove the baseboard of the floor, expose the expansion joint, and dissipate all the water vapor until the floor is dry. For small areas of water ingress, it is recommended not to pry the wooden board out, which is easy to cause irreparable damage to the floor, and can not be used in the later stage if it is serious.

2. Re-paint and waxing: After the expansion of a large area of water intake, the surface paint is damaged, and the soaked floor should be pried up and dried, and the floor should be repainted and waxed with the same kind of paint as the original.

3. Vacuum cleaner sucking away water vapor method: For the treatment of most partially soaked floors, first of all, the water on the surface needs to be wiped dry as soon as possible, and then the vacuum cleaner can be used to aim at the splicing gaps of the soaked floor to absorb the water vapor.

4. Hair dryer drying: If the floor is less soaked in water, you can also use a hair dryer to blow against the gap until it is dry. However, do not use hot air, but dry slowly with cold air to prevent the surface from drying out and deforming due to too rapid heating and drying.

5. Air conditioning refrigeration dehumidification: If the floor is soaked in a wide range and a large area, but the immersion time is short, in addition to the above methods, air conditioning refrigeration can also be considered to dehumidify. Pay attention to close doors and windows, condense the space, and turn on the air conditioner to the lowest temperature.

In general, with this method, the floor will dry completely in about a day.

Drain the surface water of the floor quickly, and then remove the baseboard of the floor to expose the expansion joints, which allow the water vapor to be dissipated by the expansion joints, but it usually takes about seven to fifteen days to dry depending on the amount of water intake.

1. Water ingress in a small area of the floor.

When the floor is flooded, first dry the water, wipe the moisture on the surface of the floor with a dry cloth, and then choose a practical vacuum cleaner to suck up the water vapor in the splicing gap of the soaked floor; Next, you can use some heavy objects to press on the small warped area, and after a while, the wooden floor will return to normal on its own.

2. The water ingress of the floor is serious.

If there is a large area of water soaking, then we can not deal with it so simply, the floor should be carefully pried up, according to the "well" shape superimposed in the ventilation place to dry, under normal circumstances, for the quality of the solid wood floor can be used again.

The wood species used for solid wood flooring require beautiful texture, moderate hardness and softness of the material, good dimensional stability and processability. Commonly used solid wood flooring tree species in the national standard "GB stipulates: birch, southwest birch, Pingguo iron sumac, ash, large gamba, Malayan gamba, water green grass, small leaf green, white oak, red oak, bitter oak, oak, beech, teak, neem, wood podum, fragrant two-winged bean, balsam pigeon pea, etc.

Fraxinus mandshurica and southwest birch have good wood grain, which can obtain a good effect close to nature. The color of Liu'an wood and walnut is ideal, and the overall sense of the ground is very strong. The combus, wood bean, red plum and so on are dark in color, high in hardness, large in weight, dense in structure, and can be made into imitation mahogany flooring.

More high-end solid wood floors include teak, sandalwood, maple, oak, beech, rosewood, etc., with ideal patterns, colors, and hardness, and of course, they are also more expensive.

Many tree species are similar in texture and appearance, but there is a big difference. In addition to the above-mentioned imitation mahogany, for example, the oak wood produced in the southwest of our country is similar to American oak, domestic green wood and imported beech, etc., the choice is cautious, coupled with the clever construction, you can get an elegant and luxurious ground effect at a low price.

Teak is mainly produced in Myanmar and Thailand in Southeast Asia, with Myanmar as the best, the wood is yellow-brown to dark brown, the chord surface often has dark black stripes, the surface is oily, the wood is shiny, and the new cut surface has a leather smell, which is a precious flooring material. Nowadays, there are many teak products on the market, such as "Black Heart Lotus", "Golden Grapefruit" and "Golden Teak", which are counterfeit teak, and consumers need to be cautious in their choice.

Oak wood is mainly produced in Changbai Mountain and Northeast China in China, the wood is light yellow, the texture is straight, the chord surface has a silver pattern, the wood is fine and hard, the dry shrinkage is small, and it is more suitable for the working class.

Fraxinus mandshurica is mainly produced in the Changbai Mountains of China, the material performance is better, the color is yellow-white to gray-brown, the wooden structure is medium to coarse, the texture is straight, the chord surface has a beautiful landscape pattern pattern, strong luster, slightly waxy texture.

<> If the area of soaking water is small, quickly take a mop to dry the water stains on the surface, and then take some absorbent towels to cover the auspicious back cover to absorb the position that is not easy to drag, and then wait for the water banquet stains to dry naturally.

At this time, you need to use a dry mop to mop the water-stained places on the floor, and then use a towel to gently scrub the water-stained places, and finally use a hair dryer to dry the soaked water. When using a hair dryer, use a cold air setting, and if you use hot air to dry, the floor will crack and deform.

Draining the water under the floor in time, and then using a blower to dry the residual water, are better ways to solve the problem of soaking in water on the floor.

1. Solid wood floors are generally not very waterproof, if you just use a wet mop to mop the floor, then there should not be much damage to the floor.

2. If the leaky floor is completely soaked in water, the floor will crack and warp after a long time, and the floor will not be usable at this time.

3. If only the water is splashed on the floor, then it will not be a problem to wipe it dry in time with a mop.

4. If the floor has been blistered, then all the water under the floor should be pumped out in time, and then check the damage to the floor.

If you buy the floor yourself, and then let the construction party to construct, the cost will be relatively cheaper, generally between 40 and 50 yuan per square meter. If all the things are purchased from a decoration company, then it will be relatively high, generally** is more than 60 yuan. In fact, the ** of laying the floor contains a lot of content, such as including labor costs, including the cost of various accessories, and also includes the cost of flooring.

Therefore, the specific cost also depends on the labor charging standards of each place, and it also depends on the quality of the product.

In fact, these two materials have their own characteristics, floor leather is a kind of plastic products, the thickness is less than two millimeters, and there is a certain anti-slip performance, the product is not very high, and the floor paste is actually a paper material that belongs to the ground, the advantage is that the pattern rock rot is more exquisite, and the range of choices is very wide, but the disadvantage is that the life of use is not very long, are more common materials.

The above is about how to deal with the problem of soaking the floor in water, generally you can quickly dry the floor, you can use the hair dryer at home to blow it, or use a vacuum cleaner to suck up the water.

Drain the surface water from the floor in the shortest possible time. If it is a small area of immersion, it is recommended not to pry the reinforced floor to dry, because it is easy to cause hard damage to the reinforced floor, which may lead to serious consequences that cannot be restored to use. It is best to remove the floor baseboard quickly to expose the expansion joints, through which the water vapor is dissipated.

Depending on the amount of seepage, it usually takes about three to ten days to dry. At the same time, you can use a vacuum cleaner to suck the water vapor in the joints of the soaked floor, or use a hair dryer to dry it with cold air, but do not blow it with hot air to prevent the surface from cracking and deforming due to heating and drying.

If there is a large area of soaking water, notify the floor after-sales service office in time, carefully pry the floor under the condition of keeping the floor unchanged as much as possible, put it in a ventilated place to dry into a "well" shape, and use the weight generated by the stacking to prevent deformation. Be careful not to expose it to sunlight. Generally, the solid wood floor can be reused.

For water-soaked warped floors, it is best to replace them.

If it is very serious soaking, the floor will be in a state of obsolescence, and the floor can only be removed and redecorated.

At this time, the floor should be wiped dry, if there are still water stains after drying, you can use a hair dryer to dry the floor, if the soak is more serious, you can find a professional to repair and remedy.

You can replace the floor partially, and do a good cleaning underneath, which is the best way to deal with it.

It should be treated promptly, the floor should be cleaned with a dry mop, and then the floor should be dried as soon as possible.

Option 1: Suck with a high-power vacuum cleaner

Indications: Solid wood flooring with a small area of water inlet in the straight laying method.

**Solution: If the water ingress phenomenon is detected in a very short time, the water vapor can be sucked out with a high-power vacuum cleaner. However, if there is a large area of water, it is necessary to pry up all the floors and dry them in the shade according to the second plan.

At the same time, if the indoor humidity is large, if there is a condition, a dehumidifier can be installed indoors, and the indoor moisture can be drained in a short time, but this operation scheme needs to have floor dryness identification technology.

Option II

Indications: Laminate flooring soaked in water.

**Solution: Whether it is a large area of water or a small area of water, it is not recommended to pry up the laminate floor to dry, which is easy to cause damage to the laminate flooring, and is likely to cause serious consequences that cannot be used again.

It is best to drain the surface water of the floor quickly, and then remove the baseboard of the floor, expose the expansion joint, and dissipate the water vapor by the expansion joint, but according to the size of the water intake, it usually takes about seven to fifteen days to dry.

Plan 3: Pry up the wooden floor and stack it in a "well" shape to dry

Indications: The floor is pried up after soaking in water.

**Solution: For soaking floors, it is important to dry in the shade while trying to keep the floor from deforming. After the surface water of the floor can be wiped dry, it should be placed in the shape of "well" superposition, and the weight generated by its stacking can be used to prevent deformation, and the reverse side of the floor should be paid attention to when placing it to prevent the surface from drying out due to rapid drying, and at the same time, it should not be exposed to the sun, it should be placed in a ventilated place to dry, and under normal circumstances, it can be used again for solid wood and multi-layer solid wood with good quality.

In addition, in the event of water leakage, the floor after-sales service office should be notified as soon as possible, and the staff will provide the best solution to the owner based on the floor's own situation.

Option IV

Indications: add keel, small area soaked in water solid wood flooring.

**Solution: If the water ingress in a small area is found in time, the ground can be cleaned, the board can be pried up, and the wet floor can be dried and reinstalled; If the water inflow is slightly large, not only should the board at the leakage be pried up, but also the opposite board should be pried up along the direction of the keel arrangement, so that the internal air circulation can take away the moisture. If you can't determine the size of the incoming water, it is best to pry up the board in turn according to the flow direction of the inlet water to check the humidity situation to be foolproof.

If it is not treated after soaking in water, or if it is not treated properly, it will not be able to dry normally, and the wooden floor may also cause mold and even cracking. Therefore, the floor should be treated as soon as possible after soaking in water.