Do you have any friends who will engage in remote monitoring? It s the DVR to add 30 points!

1. Installation. 1. The camera is connected to the DVR, and the DVR is connected to the network (router). Check that the connection is reliable.

2. Set up the DVR, set the monitoring time, trigger recording mode, storage mode, etc.

Second, debugging. 1. Debug the camera area, light, focal length, and recording file resolution.

2. The working mode of debugging the DVR is consistent with the setting mode.

3. Remote monitoring and network transmission are effective. This can be done using a laptop access router.

3. Use. 1. Real-time monitoring and viewing.

2. Call the record file to view.

3. Alarm touch viewing. Alarm conditions need to be set.

4. Precautions.

1. Real-time monitoring and viewing may reduce the effect (resolution) due to network speed, which is more obvious than that of calling record files. You can set the recording method to a high resolution in case you need it from time to time.

2. The alarm touch viewing function is debugged according to the principle of alarm must be reported and false alarms are reduced to ensure the effect of remote monitoring.

To use the big phone DVR, you must first log in, register one after entering, you need to fill in your own email address when registering, click submit, the mailbox will receive an email, click to activate.

After activation, log in to the ** again, click to enter [Create My Dynamic Domain], and the created domain name can be modified by yourself.

After getting those ready, click to enter the main menu of Dahua DVR, under the system settings menu, click [Network Settings], click Save after configuration, and then restart DVR.

After restarting, connect the recorder to the router with a network cable, if the network port on the recorder lights up green, it means that the connection is successful.

Click to open the settings of the router, after entering, in this page, click [**Rules], then click [Virtual Server] below it, click [Add New Entry], enter the corresponding number for the service port number on the page, enter the corresponding IP address, select [All] for the protocol, select [Active] for the status, and click [Save].

Click to open [IE Options] - [Security] - [Security Settings], check all settings, and click [OK].

Click to open the IE browser, after the input remote page appears, enter the username and password of the recorder in the login dialog box, and you can remote**.

First of all, you need to fill in the IP address gateway and some network settings in the network settings in your DVR, and then map the address of your DVR to the extranet in the router.

I'm a monitor professional, and I'm here to answer that question for you.

First of all, you have to do port mapping in your router.

Then fill in the IP into the DVR.

Then apply for a domain name and fill it in the DVR.

Finally, you can see it by visiting this domain.

You're level 2 and should be sensible, but you're too small for me to tell you. Hehe, go in a daze!!

IE Remote Monitoring Settings for DVR:

1) Before setting, you need to check whether the network connection and power supply of the DVR are normal, and you can operate according to the instructions of the DVR.

Go to Network Settings:

Select Type Static IP:

Move the cursor key to the location to be filled in or modified, and change the static IP address to "Confirm."

Modify the gateway to "Confirm".

Modify the Subnet Mask to Confirm.

Don't change other settings just yet, and "Confirm" exits.

2) Check whether the DVR can be accessed in the LAN and whether the browsing is normal.

Open the IE browsing interface:

Select the ...... to go to "Tools" Internet OptionsSecurity Custom level (c) ......

Select all 7 options under "ActiveX Controls & Plugins" as "Enable" and confirm "Exit".

Now, type "Enter" in IE's address bar.

After installing the plug-in, a connection dialog box will pop up, choose to select the default username and password, and click "OK" directly to see the monitoring screen!

3) Enter the remote monitoring interface of the router.

We can use the computer to access the Internet, and we have seen the monitoring screen on the LAN, which proves that our network connection is normal.

Now it's time to go to the router's remote monitoring settings:

DMZ host", fill in the IP address as ", check "Enable" at the end, and save. Click "Dynamic DNS", fill in the applied dynamic domain name, username, and password, check "Enable DDNS", click Save, and then click: "Login".

Don't connect to your current router when connecting, because the phone is connected to your host on the same LAN, so there are a lot of problems that are not easy to reflect. You can log in with the WAN port IP, which means that the port is right, if the domain name login is not good, you can directly ping the domain name to see if it is your current WAN port IP address, if not, re-do the domain name, turn off your computer's firewall and try.

Broadband access to telecommunications Netcom (New Unicom) can be used, but mobile rail communication is uncertain.

1 Apply for a dynamic domain name (3322 or Oray) 2 Turn on DDNS on the router and DMZ to the recorder IP3 Remote access through IP (plug-in required) or client access (if it is a mobile phone, please install the client).

Security monitoring, how to set up timed recording of DVR? Set it up like this.

The most detailed use of the camera ever.

To use the big phone DVR, you must first log in, register an account after entering, you need to fill in your own email address when registering, click submit, the mailbox will receive an email, click to activate.

02After activation, log in to the ** again, click to enter [Create My Dynamic Domain], and the created domain name can be modified by yourself.

03After getting those ready, click to enter the main menu of Dahua DVR, click [Network Settings] under the system settings menu, click Save after configuration, and then restart DVR.

04After restarting, connect the video recorder with a network cable to the router, if the network port on the video recorder lights up green, it means that the connection is successful.

05Click to open the settings of the router, after entering, in this page, click [**Rules], then click [Virtual Server] below it, click [Add New Entry], enter the corresponding number for the service port number on the page, enter the corresponding IP address, select [All] for the protocol, select [Effective] for status, and click [Save].

06Click to open [IE Options] - [Security] - [Security Settings], check all settings, and click [OK].

07 Click to open the IE browser, enter the remote page after the input remote page appears, enter the username and password of the recorder in the login dialog box, and you can remote**.

Remote approach.

1. To set up the broadband router (the router supports dynamic domain names), you need to apply for a domain name and bind it to your broadband router.

2. Add IP to the DVR

3. Map the port of your DVR in the broadband router and you're good to go.

4. Then you can monitor the monitoring screen of your DVR by accessing the domain name you applied for on the extranet.

The settings are different for each manufacturer, but the client must be installed.

Router setup is required. It's the nat setting. Point the address to your monitoring machine.

The DVR is like a computer providing a service, setting the port number of the DVR and then mapping it on the router. Connect with software at the remote end.