What should I do, I pressed F8 when I turned it on?

F8 is generally in safe mode, just press the reboot button to restart.

Just select Normal Boot and you're good to go.

Power on and press F8 to get in. Initial meeting without entering the operating system.

Just press the up and down arrow keys to select Normal Boot and then press the OK key.

Select Normal mode or press enter directly, or force shut down and restart the computer.

Just restart it, it's okay, don't be afraid.

Restart the computer, turn it off, restart it again, and don't press it this time.

Reboot. Nothing serious.

Summary. Hello, 1, caused by the wrong method. Workaround:

During the computer boot process, keep pressing F8 and keep pressing F8 continuously until the safe mode appears. 2. Enter safe mode, not F8 command. There are differences between different computers entering the safe mode, some computers enter the safe mode, not press F8, for example, some computers press the del key.

Solution: Check the instructions on your computer and enter the shortcut to enter safe mode correctly. 3. Caused by keyboard problems, such as F8 keyboard failure.

Solution: Repair the computer keyboard to ensure that the F8 key of the keyboard is normal. 4. Caused by computer hardware failure, such as damage to the computer motherboard, it cannot be accessed through F8.

Solution: Repair the computer hardware, it is recommended to repair it after sale.

Hello in person, 1, caused by the wrong method. Solution: During the computer boot process, keep pressing F8 and press F8 continuously until the safe mode appears.

2. Enter safe mode, Lu Yanshi is not an F8 command. There are differences between different computers entering the safe mode, some computers enter the safe mode, not press F8, for example, some computers press the del key. Workaround:

Check your computer's instructions and enter the correct shortcut to enter safe mode. 3. Caused by keyboard problems, such as F8 keyboard failure. Workaround:

Repair the computer keyboard and make sure the F8 key of the keyboard is normal. 4. Caused by computer hardware failure, early limbs such as computer motherboard damage, can not be entered through F8. Workaround:

Repair computer hardware, it is recommended to repair after-sales inspection.

No response. After booting up, press F8 and no response Solution 1: This can be done through the BIOS of the motherboard to restore factory settings.

Boot press del, go to BIOS, then select Load Setup Defaults, and you're done. If you can't enter the BIOS, there is a jumper near the battery of the motherboard, and it is OK to short it. If you can't find the jumper, you can only mess with the battery.

After booting, pressing F8 did not respond Solution 2: Some time ago, I also encountered the problem of pressing F8 to enter the safe mode, and I thought there was a problem. Later, I tried a few more times.,I found that it was a problem with the wrong timing to press f8.,You should have clicked f8 at the time when the black screen was about to appear.,You try more.,I also tried several times before I entered the safe mode.。

Summary. Dear, F8 is a safe mode.

Dear, F8 is a safe mode.

Hello dear, are you unable to get into the system or?

1.When you press "F8" when the computer is turned on and the boot menu cannot be displayed normally, so you cannot enter the "Safe Mode" interface, you can try to press the "Ctrl" key when the computer is turned on to open the system boot menu. 2.

Then in the Windows desktop, open the "Run" window, enter the "msconfig" command, and click OK to enter the system configuration policy interface. 3.From the [System Configuration] interface that opens, switch to the [Boot] tab, and check the two items of [Secure Boot] and [Minimize].

4.After the check box is complete, click the [OK] button. 5.

From the [System Configuration] interface that opens, switch to the [Boot] tab, and check the two items of [Secure Boot] and [Minimize].

Dear, try this method.

Is your system Ghost or genuine Windows is Windows

Normally, the solution to this situation is to go into safe mode with F8, and now you can't press F8, it should be a problem with the system.

What to do.

Pro,You can only reinstall the system,If there is data on the desktop,You can enter the U disk system and copy it to other disks。

Because you can't enter the safe mode, you can't delete a deactivated account.

You can try the method I just posted.

No way. Holding down Ctrl doesn't work. You'll have to reinstall the system.

How to reinstall not to the USB flash drive.

If you need to copy the information, it is recommended to go to a computer store to deal with it. To prevent data loss, the USB flash drive system is not as easy to operate as expected.

If you accidentally modify the program of the system or delete something by mistake, it will be more troublesome. Kiss.

Reasons and solutions for the computer to press f8 when the computer is turned on:

1. Caused by the wrong method.

Solution: During the computer boot process, keep pressing F8, press F8 continuously, and the ruler will quickly appear in safe mode.

Until. 2. Enter safe mode, not F8 command.

There are differences between different computers entering the safe mode, some computers enter the safe mode, not press F8, for example, some computers press the del key when the sedan.

Solution: Check the computer instructions, and enter the shortcut key to enter the safe mode correctly.

3. Caused by keyboard problems, such as F8 keyboard failure.

Solution: Repair the computer keyboard to ensure that the F8 key of the keyboard is normal.

4. Computer hardware.

Faults, such as damage to the motherboard of the computer, cannot be accessed through the F8.

Solution: Repair the computer hardware, it is recommended to repair it after sale.

Extended Knowledge: How to put your computer into safe mode:

Method 1: Press the F8 key before entering the Windows boot screen at boot power.

Method 2: Hold down the Ctrl key when you start up your computer. The system multi-operation boot menu will appear, at this time you only need to select "safemode", and you can directly enter the safe mode.