How do you reverse? How does a car reverse?

I heard that when reversing, some people only look in the rearview mirror, while some people are used to looking at the rear window? After so many years, what is your reversing habit??

When the reversing radar and reversing image are not very popular, due to the wide field of view of the rear window, it is more direct, most people are still used to looking back directly at the back, and the male protagonist in the TV series has a sense of sight? Its function is to observe the rear of the car and the rear of the car. However, there are still defects, and the obstacle at the low point is a blind spot and is not easy to find?

In the case of close range and slow reversing, three rearview mirrors are enough to meet the needs of reversing. If there is no obstacle directly behind you, you can reverse the vehicle to a predetermined location by using the left and right rearview mirrors.

It is now an era of relying on reversing sensors and reversing images, which can show the rear of the vehicle to the driver more accurately, which is safer and more reliable than models without these configurations. This is because these two functions can increase the accuracy of reversing to at least half a meter.

The reversing image or radar is designed to overcome the blind spot when reversing, helping the car owner park the car more accurately and quickly. For novices, the car reversing image is very important, so that you can park and reverse safely. On the long road of life, **Haima S5 SUV accompanies you forward?

I have a reversing camera, and I look in the left and right mirrors.

Looking at the exterior mirrors and reversing images, the main thing is the exterior mirror.

Hang in reverse gear, look around, put your foot on the brake, and move slowly.

On one side, I heard the sound of duang, and then I shifted into a shift and walked forward.

Listen to the sound, there is a sound of impact, and when you are done, you can go forward!

Yesterday it fell under the roadbed, and half of the body ran aground.

Reversing radar plus mirrors are sufficient.

Car reversing needs to ensure that there are no obstacles or pedestrians at the rear of the vehicle, to avoid accidents when reversing, pay attention to check the exterior mirror of the vehicle and the reversing image in the car to ensure the safety of the vehicle reversing route, and finally the correct operation of the vehicle to reverse, the specific operation steps:

Material: One car.

1. Press the brake pedal.

2. Press the one-button start button.

3. The instrument lights up and the vehicle starts.

4. Put the automatic gear lever in the R position and enter the reversing mode.

5. Press the accelerator and the vehicle will drive backwards.

The precautions for reversing are:

Reverse gear is the letter r, this letter is actually its abbreviation of the English reverse, and this English word translated into Chinese means reverse gear. The reverse gear is the gear that all vehicles will have, generally speaking, it will be equipped with this capital English letter mark, after hanging the reverse gear, the direction of the vehicle will be the opposite of the direction of the forward gear, that is, the vehicle will go backwards.

For automatic vehicles, if you want to reverse, the driver needs to press the brake pedal first, press the gear lock on the gear lever, and then pull down to R gear, so that you can start reversing.

However, it should be noted that there are some automatic transmission models that have different ways of getting into gear, such as Mercedes-Benz, and Lincoln series, which have physical buttons, so the specific way of gearing still depends on each model.

The manual transmission vehicle is relatively simple, the driver needs to press the clutch pedal first, and then push the gear lever directly to R gear, which requires the foot to gently lift the clutch to the semi-linkage state, and then add a little fuel to the other foot, so that it is OK.

It should be noted that whether the vehicle is a manual transmission or an automatic transmission, it is necessary to wait until the vehicle is stopped before it can start to hang the reverse gear, and the vehicle can not suddenly hang the reverse gear in the process of driving, because this operation will lead to serious wear and tear of the transmission gear, if there is often such an operation after the damage, the maintenance cost is relatively high.

Also, do not slide in the reverse direction when the reverse gear is engaged, because the reverse sliding over a long distance is easy to damage the internal parts of the gearbox.

1. Press the brake pedal of the car to prepare to start the engine.

2. Press the car's one-button start and press the shouting button to start the car.

3. Press the brake pedal.

Fourth, put the transmission in R gear and reverse gear.

5. Observe the reversing image displayed on the ** display screen.

6. Lift the brake pedal when there is no obstacle, and the vehicle will slowly move towards the socks after seeping skin.

Operation method of reversing: (1) The driving posture of reversing is based on the contour of the car and the width and height of the load and the road conditions of the traffic environment, when reversing, the situation under the car and behind the car should be observed first, and the following two methods can be adopted: Look at the rear window to reverse.

The driver's seat is on the left side of the left hand holding the steering wheel, the upper body is tilted to the right, the right arm rests on the upper end of the backrest, and the head is facing back. Both eyes are fixed on the target behind them through the rear window. If the driver's seat is on the right side, sit reclining from the upper body to the left.

Look at the side of the car reversing. The driver's seat is on the left side, the right hand holds the upper end of the steering wheel, the left hand rests on the door frame that opens the door, the upper body is tilted out of the cab, the head is facing back, and the eyes are fixed on the target behind you. (2) The target selection of reversing is watched by the rear window.

The last two corners of the carriage shall prevail. Select an appropriate target from a site, garage door, or building at a parked location, and then reverse the vehicle according to the target. Looking at the reverse from the side.

It can be based on the corner of the car or the rear wheel. Take the site, the garage door, or the building in the position as the appropriate day mark, and then, according to the target, reverse. When reversing, if someone is in charge, it should cooperate closely with the commander.

3) Reversing operation method When reversing, you should first turn on the turn signal, honk (not the forbidden honking section), observe the surrounding situation, and select the target of advance and retreat; If you are unsure or if necessary, you should get out of the car and check out, and pay attention to whether there is any oncoming car in front of or behind. After selecting the rear reverse target, in the case of vehicle stopping, shift into reverse gear, and according to the needs of the target, according to one of the above two reverse driving postures to reverse operation. Straight reverse.

The front wheels should be kept forward and backward, and the steering wheel should be used as if it were forward. If the rear of the car deviates to the left (or right) when reversing, the steering wheel should be turned to the right (or left) immediately, and the steering wheel can be returned to the right after the rear of the car is straightened. Steering and reversing.

That is, reversing in a different direction. should be mastered"；Slow driving, fast steering"；How to do it. When reversing, pay attention to the situation behind the car.

When reversing, the radius arc of the front outer wheel is greater than that of the rear wheel. Therefore, pay close attention to the wheels on the outside of the front of the car to avoid scratching with obstacles. At the same time, it is necessary to take care of the movement of the whole car.

The reversing speed should be controlled within 5km h. In reversing, if it is necessary to move forward or backward repeatedly due to the terrain or the steering angle of the steering wheel, the vehicle should be quickly used to move and turn the steering wheel at the moment before each backward or forward approaching the stop, so as to prepare for steering again forward or backward, and should not forcefully turn the steering wheel after the vehicle has stopped. It should be clarified that the direction of the reverse of the steering, the direction of the rear of the car, that is, the direction of turning the steering wheel.

The manual gear steps on the clutch into R gear, and the automatic gear directly enters R gear to reverse.

Start the engine, hook up the reverse gear, press the throttle and you're good to go.

Look in the rearview mirror, be sure to practice slowly, and would rather leave more space than get too close.