How to reverse a semi trailer, how to get a semi trailer to reverse?

In the opposite direction, it's similar to a tractor, but you still have to think a lot about it. Peer.

Before reversing, first see the situation behind the car, estimate the route of reversing, determine whether the front of the car will hit obstacles, try not to step on the accelerator when reversing, and control the speed not too fast.

Turn the steering wheel with your left hand according to the direction of travel at the rear of the car.

If the rear of the car needs to go to the right rear, turn the steering wheel to the right; Otherwise, turn the steering wheel to the left. In fact, this is the same as the steering operation when the car is driving forward, so you will not be in a hurry to get in the wrong direction when you keep this in mind.

Do not keep looking at the back of the car during reversing, and on the premise of confirming the safety of the rear of the car, you need to observe the left and right mirrors from time to time, pay attention to the distance between obstacles and the body, and use the steering wheel to correct the position of the body when it is retreating.

If you feel that the front of the car may hit an obstacle during the reversing process, you also need to look in front of the car at the appropriate time.

Semi-hangingA few tips for reversing the car:

1. When the semi-trailer is reversing, the steering wheel rotates in the opposite direction to the direction of the single vehicle.

2. Reduce the speed of the vehicle when the road is sharply bent.

3. When the road is bent to the left, the front outside of the semi-trailer rushes out of the tractor.

4. When the road is bent on the right, the inner and rear side of the semi-trailer is close to the center line of the road.

The tips for reversing a semi-trailer are as follows:

1. The semi-trailer and the adjacent car side by side confirm that the distance between the adjacent car and the adjacent car is about 1 meter: after confirming the safety behind the vehicle, reverse in a straight line, and stop when the rear bumper of the vehicle is side by side. 2. Turn the steering wheel right and reverse to the target position

When the car is stopped, turn the steering wheel to the right all the way. Relax the brake pedal slightly and reverse with the semi-trailer creep function. The left side of the vehicle stops when it reaches a point where it extends in a straight line.

3. Turn the steering wheel left to make the tire return to the right and then reverse: when the car stops, turn the steering wheel to make the tire right; Slowly reverse in a straight line, and stop reversing when the left rear wheel reaches the white line on the outside of the parking space.

Precautions for driving a semi-trailer:

When turning, pay attention to whether there are pedestrians in the blind spot of the viewing angle, especially those riding battery bikes, which appear suddenly and silently. Always check your tires before you travel. When reversing, the direction is reversed, to play slowly and slowly, the amplitude should not be too disturbing, and the eyes and ears should not panic.

If you go far away, it is necessary to check the vehicle, including: the vehicle's half-shaft, screw drive, screw, horn, light, tire pressure, these are the must, and the places where the accident is more likely are these points.

Do not use the practice of "leaving first and then braking" to run in the brakes. Although this can relatively reduce the impact on the engine when braking, it can be dangerous, and it is even worse once the habit is formed.

Those who have passed the second subject will feel that reversing into the warehouse is the most difficult of the five items. Even if you practice very hard and diligently, it is easy to make mistakes in exams. That's because you haven't mastered the art of reversing into storage. Then let's talk about the skills of reversing semi-trailers.

1.Confirm that the semi-trailer and the adjacent carriage are side by side, and the distance between the adjacent carriages is about 1m. After confirming the safety of the rear side, when the rear bumper of the vehicle is brought together, the semi-trailer will go straight and go back and stop.

2.Turn the steering wheel to the right and reverse to the target position. When the car stops, turn the steering wheel to the right. Easily open the brake pedal and use the crawling function of the semi-trailer to reverse. When the left side of the car reaches a certain point on the line that extends straight to the line, it stops.

3.Turn the steering wheel to the left and reverse with the tires aligned. When the car is parked, turn the steering wheel to align with the tires;Slowly go back in a straight line and stop reversing when the left rear wheel reaches the white line outside the parking space.

4.The car moves closer to the right, hits the steering wheel of the semi-trailer to the left, and slowly retreats;Before the vehicle is parallel to the shoulder, turn the vehicle back to the right and park parallel to the shoulder (semi-trailers are large vehicles, so be careful not to collide with the vehicle behind you when parking).

The formula for semi-reverse abilities is:

1.When a semi-trailer is reversing, the steering wheel turns in the opposite direction to the bicycle.

2.Reduce your speed when making sharp turns in road conditions.

3.When turning left, rush out of the tractor from the front outside of the semi-trailer.

4.When turning right, the inside and rear of the semi-trailer are close to the road centerline.

5.Don't be in a hurry when reversing to the back. Be sure to look in the mirror to find a good car's sense of distance and direction.

Millions of car purchase subsidies.

The skills of semi-trailer reversing are as follows: 1. Semi-trailer and adjacent car side by side confirm that the distance between the adjacent car and the adjacent car is about 1 meter: after confirming the safety behind the straight line reversing, when the rear bumper of the vehicle is side by side, the parking front belt.

2. Turn the steering wheel right and reverse to the target position: hit the steering wheel to the right when the car stops. Relax the brake pedal slightly and reverse with the semi-trailer creep function.

The left side of the vehicle stops when it reaches a point where it extends in a straight line. 3. Turn the steering wheel left to make the tire return to the right and then reverse: when the car stops, turn the steering wheel to make the tire right; Slowly reverse in a straight line, the left rear wheel reaches Zhizhou, and when it reaches the white line outside the parking space, stop the silver and take the reed.

The tips and essentials of semi-trailer reversing are as follows:

Before reversing the semi-trailer, the front and body of the car should be adjusted, and the front of the car and the trailer should be kept straight as much as possible, or the front of the car should be tilted to the side of the target parking space, and then operate according to the basic method - when reversing to the left, hit the steering wheel clockwise, and hit the steering wheel counterclockwise when reversing to the right.

Be careful not to kill the direction, the semi-trailer is also corrected while reversing. If you can't turn around, it's best to get ahead of the car and then reverse again.

The above is the method of reversing the gila slag, knowing the basic method, the rest is to practice, but you must pay attention to the following points at ordinary times:

1. Whether you go forward or reverse, you must see the surrounding situation clearly, the situation with limited vision can allow people to help command, but try to keep the commander in the field of vision, keep the distance between people and vehicles, and do not follow in the footsteps of Comrade Lei Feng.

2. Maintain a good attitude and be calm no matter what the situation. If you can't get a handful, it doesn't matter if you have a few more, even if someone urges you to honk the horn, don't worry, the same driver will understand.

3. When reversing, you must observe carefully, slow down, and don't take it lightly even if the old driver is skilled. Because there are many accidents that occur every year in reversing, don't let carelessness harm yourself and others.

A semi-trailer is a trailer with axles placed behind the vehicle's center of gravity (when the vehicle is evenly loaded by wheels) and equipped with a coupling device that transmits horizontal and vertical forces to the tractor. Semi-trailers are generally three-axle semi-trailers, and their types are divided into 11-meter warehouse semi-trailers, 13-meter warehouse columns, low-bed semi-trailers and other types. It is a kind of heavy-duty transport vehicle that is connected with the semi-trailer head through the towing pin.

The skills and principles of semi-trailer slag transformation car are as follows:

1) Semi-trailer reversing, first of all, straight line is the original basic skill of semi-trailer reversing! Semi-trailer reversing straight line skills, use the front end of the semi-trailer to cover the hanging body of the semi-trailer! Because the grinding disc is hanging in front of you!

If the body closest to the grinding disc is the front end! When we see the hanger, it proves that the hanger is already diagonal in the direction of the hang we see.

In fact, it is not a hanging oblique, it is the front of our semi-trailer that converts the front of the car through the grinding disc in the oblique, causing us all to have a misunderstanding of hanging oblique, as long as we are as calm as water, slowly looking for the law of hanging in our reflector in the reflector, you will go from a large number of repeated wheel practice to add the throttle or a small range of reincarnation wheel.

2) Only practice the big throttle straight repeatedly! We can find the law of feeling, advance, and prediction in a straight line! If you don't want to practice hard even in a straight line!

You are destined to never be able to play semi-trailer reversing! Hengyi only teaches the only way to teach semi-trailer straight lines! Hang the front end of the mirror to block the hanging body, and block back and forth!

Eyes to hands, eyes and hands in one! Keep your eyes in front and your hands on your feet.

3) The semi-trailer reversing process is like a process of falling in love, first understanding the dynamics of the hanging in the mirror from familiarity to driving to control the reflection at will! The semi-trailer reversing practice method is to play straight first! Play the bend again!

If the straight can't last, please don't play the semi-trailer corner! The side orientation of the semi-trailer is the process of learning to bend!

4) The small side orientation is a small bend, and the big side orientation is a big bend to hold! If we can do it in the mirror, no matter how oblique it is, we can bend it as much as we want, and hang it in our hands without losing control! It's a hand-controlled semi-trailer hanging!

Can't let hang control our hands! We need to practice using the mirror to control the dynamics of the hanging! That's where we get different from him to practice semi-trailers!

Semi-trailer any project is inseparable from a straight line.