Are there any unique parameters for TIMKEN 74510D 74850 bearings?

Do you need this? Hope it helps.

Model: 74510D 74850

Inner ring model: 74510D

Outer ring model: 74850

Inner Diameter: Outer Diameter:

Thickness: Brand: Timken

Type: Tapered roller bearings.

It's unclear what are the unique parameters of the Timken 74510D 74850 bearing, but the basic parameters are as follows:

Bearing number: 74510D 74850

Inner diameter (d):

Outer diameter (d):

Width (c):

Mass (kg):

Brand: timken

Category: Tapered roller bearings.

TIMENKEN 74510D 74850 bearings should be installed in a dust-free and clean room, the bearings should be carefully selected, the spacer rings for bearings should be grinded, and the parallelism of the spacers should be controlled below 1um under the premise of maintaining the equal height of the inner and outer rings; I also want to know which parameters can be consulted Xi'an Junchi Power, these are also found from them!

Bearing Model: EE275109D 275160 I.D.(D): mm

Outer diameter (d): mm

Width (c): mm

Mass (kg):

Brand: timken

Category: Tapered roller bearings.

This model is not found in the common samples, the above size is searched on the Internet, the size and weight of the upper side should be the weight and overall size of the inner ring and the outer ring after assembly (including a double-row inner ring, and two single-row outer rings, the outer ring can be easily taken down, the weight is net weight, not including the box).

This model has two outer rings (model EE275160);

There is one inner ring, which is a double column (model EE275109D, where D means double, indicating two columns).

I hope I'm not wrong, because the inner ring of this bearing has a squirrel, and the weight is basically on the inner ring, and the weight of the EE275109D 275155 on my sample is, and the main one is just the thin iron ring of the outer ring 275160 is a little larger than this bearing 275155, and it should be more credible on the top. (Note that 60 and 55 are just random model names given by Timken, their difference is not directly related to the size difference, and Timken's own engineers can only remember a little commonly used).

The parameters of Timken EE275109D 275160 bearing are as follows:

Bearing Model: EE275109D 275160 I.D. (D):

Outer diameter (d):

Width (c):

Mass (kg):

Brand: timken

Category: Tapered roller bearings.

TIMKEN EE275109D 275160 double row double inner ring tapered roller bearings are heat-treated with carburizing on the surface, which is hard and wear-resistant on the surface and soft on the inside, which can cushion the impact load and avoid impact cracks.

The size and weight of the upper ring should be the weight and overall size of the inner ring and the outer ring after assembly (including a double-row inner ring and two single-row outer rings, the outer ring can be easily taken down, and the weight is the net weight, without the box).

This model has two outer rings (model EE275160);

There is one inner ring, which is a double column (model EE275109D, where D means double, indicating two columns).

Timken samples are labeled as:

Bearing Model Attendant: LM742749DW LM742710 Inner Diameter Good Plex (D):

Outer diameter (d):

Width (c):

Mass (kg):

Brand: timken

Category: Round old socks denier tapered roller bearings.