Urgent! There is a problem with the computer system, and after reinstalling the system, it still can

Install it again and see, according to the situation you said, my experience tells you the problems I encountered, how to solve them, you said that if the system is reinstalled within a few days, or for a period of time, the system fails to boot, or can not find the boot, the file is lost, It is generally caused by 2 relatively large possibilities, 1: It is the data cable and power cord connected to the hard disk, or the power supply of the host is insufficient, (unstable operation will lead to loss of files) In this case, just replace the data cable of the hard disk or the connected power cable, If the power supply is insufficient, change to a power supply with a high power 2: The hard disk has bad sectors, this problem is more serious, you can use a tool such as an efficiency source to scan it for bad sectors, if there are really bad sectors, then you can only replace the new hard disk, There is a way to hide the bad sectors but it is not recommended, (the problem is that the hard disk has bad sectors is a hardware problem, physical bad sectors, after all, it is hidden, and there will be problems after a long time, and it may lead to the loss of important data to make up for it.)

Boot F8 Some systems are F11, and there is a one-click restore system

The USB flash drive file is corrupted, and the USB flash drive is used to make a new PE system.

It's good to install it again.

There is a problem after the laptop reinstalls the system, and the computer cannot start, it should be a problem with the system reinstallation, which can be solved according to the following methods:

1. First of all, once you encounter such a situation, press F8 when you boot up, and select the last correct configuration to start the operating system. Try it, or enter safe mode, set it up and start it again.

3. If the computer has an optical drive and a system CD, you can reinstall the system again, which is a more thorough method, and it will become a new system after installation.

This problem appears because you use optimization software and the like.,A lot of optimization software will delete the system files.,There are some uninstallation software.,This situation can't be repaired.,Because it's not just this one file that is lost.,There may be tens of thousands.,So you can only reinstall the system.,It is recommended that you don't optimize it in the future.,The official original system is the best and most stable!

In this case, only reloaded.

Can install win7 system or other windows system, the way is to put the disc into the optical drive, enter the BIOS, set the first boot item to the optical drive boot to save and exit.

In the future, you will directly read the installation disk or ghost system disk in the optical drive.,Now it's basically a fully automatic installation.,It's very simple.。

It should be able to fit window7. Buy a window7 disc and turn it on.

If the indicator light is on, the screen is black.

Install with a ghost system CD,I just helped a colleague get one this morning.,It's also such a tip.,After entering with a CD, choose to install the system to the first partition.。

Install it on Microsoft Original.

Repartition.

Buy a disc to reinstall, or you can go to the Internet to find a tutorial on the U disk installation system.

Go buy a disc.

Or get a USB flash drive on other computers and use software to flash the system in the USB flash drive.

It's time to reinstall.

It can't be turned on, what is the state, the computer can't start at all or can't enter the system.

Can you tell me what you did to your computer before you installed the system that caused it to not restart?

What are the symptoms? For example, there's a cursor jumping in the upper left corner? Show grub> ?Or something else?

Start your computer and hold down the Del key until the BIOS setup window appears (usually with a blue background and yellow English text).

Select and go to BIOS Setup. Find the item or group that contains the word boot, and find the three items in order: "first", "secend", and "third", which represent "first start", "second startup", and "third startup" respectively. Here we can set it to "optical drive" and "hard disk" in order.

If you don't see these three E documents on this page, usually the option menu on the right side of boot is "setup", then press enter to see) should select "first" and hit enter, and select hdd-0 in the submenu that comes out. Press enter again.

Is it because the driver is not installed? Under normal circumstances, the newly installed system should be the smoothest, check the driver.

I've happened to this many times before, and I usually don't bother with it, just restart it. You deleted it here, you can use software to repair, or you can directly overwrite it in C: Windows System32 Repair Program Keniu Free Antivirus System Repair Tool (Recommended) and Kingsoft Net Shield One-click Repair Check it on the Internet, and then check the file with icech, and find that this file is not poisoned, and it is correct to compare the normal version of MD5, which means that it is a false positive of ESET NOD32.

Solution: In the future, it is best to do this, this will not happen Open ESET NOD32, click "Settings->Show left and right advanced settings", in the "Virus and Spyware Protection-> Exclusion (Exclusion List)" interface, click the "Add (A)" button, enter the path "C: Windows System32, confirm--- confirm ---, and this will not happen in the future.

Hope it helps.

This is a DLL file related to the input method, which may affect the operation of your input method program. However, it is also possible that there is a chain reaction of errors in other related programs that cause IMM32 errors.

This is an input method related program, you can first make a boot USB flash drive, and then** to the USB flash drive, and then reboot into the Windows PE system, paste it into C: Windows System32 to try, I hope it can help you.