-
What should I do if the SD card of my mobile phone cannot be read? The mobile phone can not read the SD card data is a common problem in digital devices, some users can only have no choice but to give up the original information, but it is a pity to lose it, can only be put and can not be used, if the user encounters such a situation, is there a way to solve it?
1. If the memory card used on the mobile phone suddenly appears this kind of error, you can try to turn it off and wait for a while before turning it on. If this is OK, it is possible that your card is not inserted properly, and the card can be inserted in this problem.
2. If it can be detected on the mobile phone or camera but cannot be used, it can be formatted by the mobile phone or camera, such as the original Toshiba 8G card used by my Panasonic ZS10 camera, there is no problem after formatting with the camera;
If not, you can insert the SD card into another mobile phone or computer card reader, and format it on the computer;
3. Sometimes some viruses can also cause this problem, you can format the card in computer security mode or win pe;
4. If neither the mobile phone nor the computer can recognize the card, or neither can format the card, it can be determined that the card is damaged;
5. Card damage is not completely impossible to repair, try to repair it through some U disk repair software, it is recommended to use DiskGenius to repair it first.
The above content is about the solution to the unreadable SD card of the mobile phone, generally we deal with it according to the above methods, the SD card can be used normally, but a few SD cards have no possibility of repair.
-
Hi Format Data Recovery Master is a powerful, simple interface, and simple to operate data recovery software. It supports the recovery of hard disk files deleted by mistake, disk formatted by mistake, memory card data deleted by mistake, files emptied by mistake, and hard disk files after the hard disk partition disappeared.
-
1. Reinstall the memory card.
Turn off the phone and remove the memory card, observe whether there are stains on the metal surface, clean it and reinstall the memory card to see if it can be recognized.
2. Check whether the memory card looks good.
Observe whether there are stains on the metal surface of the memory card, clean the surface stains, and avoid poor contact that causes the memory card to be unrecognized. If there is cosmetic damage, it is recommended to replace the memory card with a new one.
3. Use other equipment for comparative testing.
Use a card reader to install a memory card to connect it to your computer, or mount the memory card into another device to see if it is recognized. If none of them are recognized, the memory card is corrupted.
4. Service center testing.
If the above methods fail to solve your problem, please back up your mobile phone data in advance, bring your mobile phone and purchase voucher to vivo customer service center for testing, pay attention to WeChat *** "vivo" or "vivo customer service" to inquire about the service center address**, it is recommended to contact before going to ensure that there is a staff reception before going over, so as to avoid delaying precious time and running in vain.
The problem is simple, because your phone ROM may not support APP2SD+, so it can't be installed on the SD card! It must be supported by ROM with Android version or above! If it doesn't work, it is recommended to flash the ROM after rooting! >>>More
2. After opening, there is basically no card that DiskGenius can't read, check the partition of the card, see if there is a hidden partition, anyway, the partition will be read out. Use a tool to repair the partition table or MBR, and you can use it to recover all the deleted files. As for recovering photos and files, you can also use online recovery tools. >>>More
After partitioning, it is nothing more than convenient viewing and management of files. >>>More
The problem of the card slot, I've also encountered it...
Reasons why iPhone won't turn on and how to fix it:
1. There is no electricity. If you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before trying to turn it on. >>>More