Reading issues with the phone s micro SD card

The problem of the card slot, I've also encountered it...

1. Prepare your phone and card pin.

2. Then insert the card needle into the card removal hole, press and hold the mobile phone, and press the card needle slightly harder.

3. The card slot will automatically pop up, and we will gently unplug it.

4. Prepare SIM card and microSD card in advance.

5. Insert the SIM card first, which is directional, one of the 4 corners is not square, and the card and card slot just fit this shape to insert it.

6. Then insert the microSD card, which is also directional, just insert it according to the direction.

7. Insert the SIM card and the card slot of the microSD card into the mobile phone in the correct direction, and the mobile phone can be restarted.

Of course, it will also indirectly affect the speed. It's like I'm going to walk from A Street to C Street and pass through B Street. If B Street is blocked, do you think you'll be able to get to C Street quickly?

Generally, the speed of the card reader is greater than the write speed of the card, so it doesn't matter.

Of course, it will affect, and the port will also be affected, and some transmission rates are different o( o

Class 10 means a write speed of 10MB per second, and so on, with a higher read speed.

I don't know if you've ever been in this situation.

1. If this is the first time, you can take out the memory card and reboot it again. If you can read the card, it means that the phone sometimes can't recognize the memory card, and it's not a big problem.

2. If the card cannot be read because of a new memory card, the reason may be that the memory card is not formatted, if the mobile phone can only partially read the card (can not fully read all the contents of the memory card), it is due to the limitation of the extended memory supported by your mobile phone. For example, the phone only supports 1G of extended memory, and if you are using a 2G memory card, then this may be the case.

3. Try another mobile phone to see if your memory card can read it, if it can, and your mobile phone can't, it means that your mobile phone has the problem of dust or poor contact. It is advisable to check these issues out.

4. If you change your phone and still can't read the card, it is recommended to format the memory card and put it into the mobile phone to take a look. It is recommended to replace the memory card.

5. If the card cannot be read because of some software on the Internet on the mobile phone, it may be caused by a mobile phone virus. It is recommended that you kill your phone on your computer. This is generally rare.

2.Hot-swapping of micro SD cards may cause the problem that the micro SD card does not recognize or even damages the micro SD card probably, so it is recommended that you do not hot-swap the card as much as possible. The micro SD card is not recognized, please turn off the screen for a period of time (about 10 seconds) before turning on the screen, if it still can't be read, please try to restart the phone.

If you still can't recognize it, replace the micro SD card.

3.Please click Settings Memory & Storage to check the remaining space on your SD card, if the memory is not enough, please clean up or move the files in your SD card.

4.If the SD card is encrypted on another phone or the SD card is damaged, replace the SD card to try.