Which is brighter led or energy saving lamp Is LED light brighter than energy saving lamp

LED lamps and energy-saving lamps are two different light sources, here is a comparison of the differences, you can refer to it, LED lamps are solid-state packaged, belonging to the cold light source type. So it's easy to transport and install, and can be installed in any miniature and enclosed device, without fear of vibration, and basically no need to think about heat dissipation.

2. There is mercury pollution in the production process and after the use of energy-saving lamps, and Western countries attach great importance to mercury pollution. There is also a growing awareness of the dangers of mercury pollution. LED lights are environmentally friendly and free of harmful substances of mercury.

The assembly parts of the LED lamp can be very easy to disassemble and assemble, and can be passed by others without the manufacturer**.

3. Energy-saving lamps are easy to damage and have a short lifespan. LED lights have a long lifespan, with a life span of more than 100,000 hours, and can work at high speeds. If the energy-saving lamp is turned on or off frequently, the filament will turn black and break down quickly.

4. The power consumption of energy-saving lamps is still too large. The energy consumption of white LEDs is only 1 10 of incandescent lamps and 1 4 of energy-saving lamps.

5. The color rendering index of LED lamps is low, and the colors displayed under LED lamps are not as real as energy-saving lamps.

6. The power of a single LED lamp is low, and multiple parallel connections are required in order to achieve the same brightness as energy-saving lamps.

7. LED lighting technology is not as mature and perfect as energy-saving lamp technology.

At present, LED lamps are higher than energy-saving lamps, and with the gradual popularity of the market, LED lamps will gradually decline, and will eventually replace energy-saving lamps.

The above introduction to LED lamps and energy-saving lamps.

LED lights and energy-saving lamps can't directly say which one is more power-efficient, it depends on the power. The brightness of LED lamp 12W is equivalent to the brightness of ordinary lamp 36W, and LED lamp has a longer lifespan, generally warranty of three years, life span of 50,000 hours, and the LED principle is that electricity is directly converted into visible light, energy-saving lamp is electricity converted into ultraviolet light, ultraviolet excitation phosphor luminescence, there is one more conversion program, so the power utilization rate of LED is higher than that of energy-saving lamps, that is, the so-called high light efficiency, the lumens of a single lamp of LED lamps are brighter, so on the whole, LED lights are brighter.

Are LED lights brighter than energy-saving lamps This question is not easy to say, and it is generally compared with comprehensive efficiency. LED downlights have the highest comprehensive efficiency, with a full beam of 500lm (color temperature of 5000W, RA80 or more), and a comprehensive efficiency of 87lm W, and fluorescent lamps with the same light effect, the estimated comprehensive efficiency is also about 80.

This is called comprehensive comparison, if it is just a simple brightness comparison, the laser light is invincible, irradiating a point, tens of thousands of lm.

Let me tell you so! The 1W of the LED lamp is equivalent to the 2W of the energy-saving lamp, basically showing a trend of 1:, so the energy-saving lamp is brighter, but it is also a fact that the good LED lamp is brighter than the energy-saving lamp, and it has to speak according to the actual situation, many of these data are theoretical.

It depends on the wattage, power saving, and long life is important.

Lamps and lanterns are indispensable in our lives, and many people will put themEnergy-saving lamps and LED lightsEnergy-saving lamps:

Energy-saving lamps, also known as energy-saving bulbs, electronic bulbs, compact fluorescent lamps and integrated fluorescent lamps, refer to lighting equipment that combines fluorescent lamps and ballasts (stabilizers) into a whole. In 2008, the state launched the "green lighting" project, and urban and rural residents and enterprises enjoy a certain proportion of subsidies for the use of energy-saving lamps of winning enterprises. The promotion of energy-saving lamps is of great significance, however, the harm of waste energy-saving lamps to the environment has also attracted attention.

By the end of October 2012, the energy-saving promotion project has hundreds of millions of energy-saving lamps scrapped, each can pollute 180 tons of water and five or six acres of soil, the treatment of waste energy-saving lamps and the problem of the first cause of concern. Despite this, the demand for energy-saving lamps is still growing, especially in 2015.

LED Lights:

The LED lamp is an electroluminescent semiconductor material chip, which is cured to the bracket with silver glue or white glue, and then connected to the chip and circuit board with silver wire or gold wire, sealed with epoxy resin around it, which plays the role of protecting the internal core, and finally installs the shell, so the LED lamp has good seismic performance.

What is the difference between LED lights and energy-saving lights?

1. Luminescence principle:

There is a small lamp bead encapsulated in epoxy resin in the LED lamp, which greatly reduces the weight of the LED lamp and reduces the volume, so that its highest power consumption will not be higher than the luminous principle of the lamp, which mainly relies on the internal light-emitting diode, which makes the light energy directly converted from electrical energy.

The luminous principle of energy-saving lamps relies on the internal ballast, which can heat the lamp filament when the power is on, and when the filament temperature reaches 1160K, electrons will be emitted from the filament to play a luminous effect.

Lighting fixtures have a certain service life, from the perspective of the life of the two, the life of energy-saving lamps is generally about 10,000 hours; The LED lamp adopts a more scientific way of emitting light, so that its service life can reach 100,000 hours. From the perspective of use time, both are consumables and will eventually break, but energy-saving lamps contain a variety of harmful components that will cause harm to the environment, while LED lamps are more environmentally friendly, and they cannot cause harm to the environment if they are discarded at will. Therefore, the use time of LED lamps is much longer than that of energy-saving lamps, and its environmental performance is higher.

, heat dissipation performance:

From the point of view of heat dissipation performance, the clever heat dissipation performance of the lead annihilation LED lamp is much worse than the heat dissipation performance of the energy-saving lamp, if the LED lamp is used for a long time, we can clearly feel its temperature rise, which is also a major disadvantage of the LED lamp. Energy-saving lamps have relatively small heat dissipation, and even if we work for a long time, we can't feel its heat.

About energy-saving lamps and LED lights, home improvement network will be introduced to you here.

What is the difference between energy-saving lamps and LED lights? Energy-saving lamps and LED lights are widely used in home lighting. So which one is better and which is better between them? Let's take a look at the difference between energy-saving lamps and LED lights.

The difference between energy-saving lamps and LED lamps Energy-saving lamps: working principle: energy-saving lamps are compact in structure and equipped with ballasts.

Advantages: small size, longer life than incandescent lamp, better energy saving effect. Cons:

**More expensive than LED lights, and with a low color rendering index, it sometimes affects people's eyesight, and it looks like things are discolored. Fragile products, mercury added to the material, can not be **, environmental pollution is difficult to solve. And when the instantaneous high voltage is generated, the ballast used by itself produces the corresponding electromagnetic radiation.

Summary: It has spread to every family, making life more convenient, but the environmental pollution that comes with it is also inevitable.

LED Lights: How they work: LEDs are also semiconductor devices such as light-emitting diodes that convert electrical energy directly into light.

Advantages: The lighting efficiency is higher than that of fluorescent lamps, the efficiency is higher than that of incandescent lamps, and it has a certain service life, so it is definitely no problem for home use. At the same time, there is no ultraviolet and infrared radiation, and there are no pollutants such as lead, mercury, etc.

Disadvantages: There are many LED light products on the market, with diverse quality and inconsistent levels. While the range is wide and there are plenty of options, some low-priced products are controlled by people, which makes it difficult to say a word.

Summary: Environmental protection and energy saving, the new era of mainstream circuit equipment, will become a trend.

You can get it for free