My Sony Ericsson X10i standby battery is heating up, and it is !! urgently.

Is it a virus in the phone, and the background runs the program itself resulting in a lot of power consumption, so it is hot, and the machine is off, or change the battery to see if it is a problem with the battery.

I hope the following can help you: Mobile phone battery heating is a phenomenon that we can often encounter in the use of mobile phones. Basically, 90% of mobile phones will have a very hot battery after a long call, and even the phone will get hot. [Cause of battery heating]:

The power consumption of the mobile phone in standby is very small, that is to say, the equivalent load resistance of its battery is large, so the discharge current is very small, so the battery will not heat up, and the internal consumption of battery power is very small. The power consumption of the mobile phone when it is ready to talk or use *** is very large, that is to say, the equivalent load resistance of its battery is small, and it is discharged with a high current when working. After the battery discharges a part of the electricity, the internal resistance increases, but the current required for the work of the mobile phone cannot be reduced, so a considerable part of the energy is consumed on the internal resistance of the battery, resulting in the battery heating, the discharge acceleration, and the battery use time is quickly shortened.

The hazards of mobile phone battery heating]: 1Prolonged battery heating can cause the phone's internal parts to heat up, causing the phone to restart or hang up on a call.

2.If the mobile phone battery is heated for a long time, the heat of the battery itself will increase, and if it is a sealed battery, the internal air will expand violently, resulting in the battery protruding from the outside, which will seriously make the battery**. 3.

Prolonged heating of the mobile phone battery will accelerate the aging process of the mobile phone itself and shorten its lifespan. [Mobile phone battery heating prevention and solutions]: one.

Prevention methods:1It is normal for the phone to generate no more than 60 at normal room temperature, and the battery will not be damaged.

2.It is not advisable to use a high-current charger for too long, as charging for too long will damage the battery and generate heat. 3.

It is best to use the charger in an original or quality reputable product. 4.If you are not in a hurry to use it, it is recommended to charge it with a base charger (slow charging mode) to avoid heating the battery.

5.If you feel that the phone is a little hot when using the phone to listen to *** or battery charging, if it exceeds 60, immediately return to the standby state or change the battery, and unplug the charger immediately if it is charging. Two.

Solution:1If the mobile phone battery has been charged and bulging, there is also a way to solve it.

It is to use your fingers to find the gap of the battery first (the back of the mobile phone battery is close to the charging electrode of the mobile phone, and it is a little soft when pressed), and poke a small hole with the target to let the air inside run out. 2.Throw away another and buy a new battery.

The above **Lexun master].

So how did you fix your phone?

Hello, is the mobile phone battery swollen and deformed? If your X10 has been around for two years or more, it's 80% a battery issue. It is recommended to try another battery.

If you have a seat charger, you can also try a seat charger. If you don't have it, you can consider buying a piece of the corresponding model of Pinsheng or Scud's auxiliary electricity, and if you are not bad for money, you can also buy a piece of Soai original electricity.

Hope it helps.

The battery is broken, and it works well to replace it with a business battery. The general commercial battery market price is about 50 yuan! Of course, there are better ones.

If you have a battery problem, buy a battery, it's better to buy a commercial battery, and the original one doesn't have to.

You can charge it with the next charging assistant software, try to use Kingsoft Battery Doctor to help you charge, not only can it be fully charged, but also help your mobile phone save power and extend battery life.

When the battery level of the mobile phone is less than 20%, start the Kingsoft Battery Doctor, and then connect the charger. The software will complete the charging process in the order of fast charging, cyclic charging and trickle charging, and will sound and pop up a prompt message after the charging is completed.

If the mobile phone battery cannot be charged, you can charge it with the auxiliary software of the next charging, try to use Kingsoft battery doctor to help you charge, which can not only be fully charged, but also help your mobile phone save power and extend battery life.

Kingsoft Battery Doctor is able to show how much time the remaining power of the battery can be used, and it is relatively accurate. Kingsoft Battery Doctor prompts the charging to be completed when the battery is charged, so as to prevent the battery from being overcharged. Kingsoft Battery Doctor can retain 80% of the original battery capacity after the battery has completed 400 charging and discharging cycles, and enhance the battery life by more than doubling.

Kingsoft Battery Doctor provides a variety of power-saving modes, you can choose the mode that suits you, and use it for a longer time when the battery is not very high. Follow my method to solve the problem, and ask me if it doesn't work.

It's a problem with the system" - <

Is it an upgrade? And then used dynamic backgrounds?

I've encountered it before, and it's good to switch back to the static one.

I have checked the Internet to format the SD card, but I have tried useless Ganlu.

This is normal,X10What to say about the battery,According to Xiaobai's statement, there is an automatic protection system,It will not be charged again after it is full of 100%,If you don't pull out the charger at this time,The indicator light will still be lit,But at this time, it will enter a state of power consumption,And it will be hot,The landlord is best to have leisure time or rush before going to bed when charging。 Otherwise, it is easy to damage the battery.

Is it an original charger or battery?

Mine too, restart at every turn, open a software and that's it.

It is recommended to re-brush, you definitely didn't brush well.

Or use the official system, if the brush is broken, it will not be warranted.

The smartphone will heat up after playing for a while. Nothing has an impact.

Your phone is going to be repaired! I've tried this with Sony Ai W910i before! In fact, mobile phones cannot be connected to computers for charging! The voltage flowing out of the computer is inconsistent with the charging voltage of the mobile phone! It will burn out the fuselage.

Open the back cover and install the battery board.

Current smartphones have a low-voltage auto-shutdown function, and the system will refuse to turn on when the voltage falls below a certain value. After the battery is removed and reinstalled, the battery voltage will rise to a certain extent, and it will be able to start up smoothly and charge when it is turned on for detection.

In fact, after more than 5 hours of use, it is almost out of power, so there is no power the next day, and the display is 45% that is related to lag, if you turn off and restart, it may be more real.

You plugged it on the computer, right? The driver is not installed.

There are settings in the phone! I forgot how to set it up! I bought it and gave it to my girlfriend in two days.

My X10 basically waits for the opportunity to run off about 10% of the battery at night.,It's no problem to turn on and charge.,Your estimate is a bit of a problem.,You bought it through the Shenma way.,Will it be a repair machine or something.。

It's normal,My mobile phone hangs Q every day,,If the display is fully charged when hanging Q for a day,After returning Q, the display will be half a grid at most,5 hours is long enough! No problem.