HP laptops set up wired routers

Preparation: Handle broadband (home network cable), wireless router, an idle network cable, and a computer.

How to set up a wired router:

1. The router is plugged in, and the network cable that enters the home is plugged into the WAN port of the router;

2. Connect the computer and the router with another network cable (plug one end into any LAN port of the router, and plug the other end into the computer);

3. After opening the computer browser, enter the IP of the router in the address bar (there is one in the manual, press enter;

4. Enter the username and password of the router, generally the initial username and password are admin (can be found in the manual).

5. Click "Setup Wizard" and click "Next";

6. Select PPPoE (ADSL Virtual Dialing) and click Next.

7. Enter the Internet access and Internet password (that is, the network username and password written in the contract of the network and operator), and click "Next";

8. After the router is set up, click "Finish".

Add QQ and I'll help you. I can't tell here.

The router needs to be set up to access the Internet in order to connect to the broadband properly.

Required: Laptop, router, direct cable.

2. Usually the back of the router is labeled, with the router login address, login username and password. If your router has changed its login address and you have forgotten it, you can reset your router and try again after resetting it to factory settings.

Here's an example:

3. In the router management interface that appears, enter the login username and password, and click Login.

4. On the left side of the router management interface, in the function menu, click Internet. Choose different connection modes depending on the way you access the Internet. Generally, if you are connected to a broadband modem, select PPPoE dial-up and fill in the broadband user name and password. When the new modem comes with a dial-up, select Dynamic IP.

5. If the router is a wireless router, set the wireless network name in the wireless settings.

6. Set a wireless password. Click "Done" and the router will automatically restart to complete the setup.

Like desktops, you need to go to the router's settings interface to set it up, and the specific steps are as follows:

1.Open your computer's browser, enter it in the address bar of your browser, and press Enter.

2.At this time, the login box of the route appears, enter the password of the route and the password (admin of lowercase empty Xiang) in the login box, click OK, and you will enter the routing settings page.

3.Click "Fight Setup Wizard", enter the account number and password in the and password field, and the setting is complete.

1. Turn on my computer.

2. Click on the control panel Click on Network & Internet Connection Click on Network Connection 3. Click on Create a new network connection.

4. Click Next in the New Network Connection Wizard to check Connect to the Internet and click Next.

5. Tick the button to set up my connection and click Next.

7. Click Done.

8. Enter the username and password to access the Internet.

Insert the network cable into the network card interface of the computer, if you go to the Internet through the router, plug in the network cable and you can get on, through the cat to access the Internet, you need to establish a broadband connection, enter the account password, dial-up the Internet.

Control Panel View network status and tasks Set up a new connection or network Connect to the Internet Set up your account password.

First of all, we need to confirm the laptop operating system, if it is a win7 system, find the network signal in the lower right corner of the taskbar, left-click the network signal icon, you can see the available network signal, just connect.

Hewlett-Packard is an American information technology company, founded in 1939 by two Stanford University graduates, William Hewlett and David Packard, focusing on printers, digital imaging, software, computers, digital printing equipment and information services.

On June 15, 2017, the U.S. Department of Energy announced that it would grant $100 million in incentive funds to six U.S. technology companies, including Hewlett-Packard, over the next three years as a core component of the new supercomputer development program.

On October 5, 2017, China's Ministry of Commerce announced that it had approved HP's acquisition of Samsung's printer business with restrictive conditions.

On October 18, 2017, Hewlett-Packard Enterprise agreed to repurchase $2 billion** in 2017. [8]

On November 1, 2017, Hewlett-Packard announced that it has completed the acquisition of Samsung Electronics' printer business in a transaction of $100 million.

In December 2017, HP released a software upgrade to remove keyloggers from notebooks.

The FX key on the keyboard (i.e. F1 to F12) has the wireless symbol on it. Press, it's the switch, if it doesn't work, press the FN+FX key combination.

There are also computer wireless switches that are external to the computer and need to be turned on manually.

Take the win7 system as an example, first of all, make sure that the keys on the keyboard of your wireless network are open, and then click on the network icon in the lower right corner, if there is a wireless network, you can search for it, and then click on the wireless route where you know the password, tick the automatic connection and then enter the password, you can go online, pure hand play, hope to adopt.

Plug the broadband network cable into the WAN interface of the router, connect the computer to the LAN interface of the router with the network cable, and set the router as follows:

1. Log in to your router (enter or log in in IE, enter the username and password, and the router label is there.) Usually admin).

2. Enter the "WAN" setting: A If your broadband is to have an account password, set PPPoE, fill in the account password, select automatic connection in the connection mode, and confirm, if your operator binds the account to your computer, choose to copy the terminal MAC address b If you don't need the account password, if you are given a fixed IP, please select a fixed IP address, and fill in the correct address of the fixed IP address, mask, gateway, and DNS c If you don't need the account password, If it is a dynamic IP address, select a dynamic IP address and enter the DNS address.

3. Go to the wireless settings, select WEP or WP2-PSK, set the wireless password, and remember this password.

4. Go to the "DHCP" settings to activate the DHCP server.

5. Connect the broadband network cable to the "WAN" port of the router.

6. Connect the computer to one of the "LAN" ports of the router.

7. The computer is set to automatically obtain IP address and DNS address.

8. Turn on your wireless device to search for wireless network (mobile phone should support wifi), wireless network SSID, is the name of your router, enter the password you set to computer, mobile phone, wireless device should be able to access the Internet.

Are you talking about HP computers? The router doesn't matter what brand of computer you're using.

I'm here to answer for you!

The questions asked are not clear enough, and if needed, they will be explained in detail.