How to set up wireless network settings for a laptop with a router

Here's how to set up a wireless router with your laptop:

1. Connect the router and demodem with a network cable, plug the wireless router into the power supply, and when the wireless router is fully activated, click the wireless signal icon on the laptop computer to connect.

Since the wireless router starts with no password, no broadband, and a blank signal, it is a blank signal, so click directly to connect.

3. Enter the setting interface of the router, as shown in the following figure:

4. Enter the administrator password and click OK. As shown below:

Note that the administrator password is not a wireless password, so it should be distinguished; Be sure to remember this password, if you forget the password in the future, you can't enter the settings, you need to clear the router data, you can set it again.

5. Click the setup wizard, as shown below

6. Click on the wireless security settings, as shown below

<>8. Fill in the online account and password, as shown below

9. Set the password, as shown below

10. Finally, click Save.

Web login password admin is set according to the wizard prompts.

1. Appearance of the wireless router.

Let's first understand the various interfaces of wireless routers, basically wireless routers are similar, and the position of the reset button may not be the same.

Connect the wireless router well, I believe this is difficult for everyone, after connecting, start the router.

2. Wireless router parameter settings.

After connecting, open the browser, it is recommended to use IE, enter it in the address bar to enter the settings interface of the wireless router.

You need to log in before you can set other parameters, the default login username and password are admin, you can refer to the manual.

After successful login, select the Setup Wizard screen, which will automatically pop up by default.

After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and you can click Next directly.

According to the setting wizard step by step setting, select the Internet mode, usually ADSL users (telecom dial-up) then select the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection.

Enter the account and password you applied for from the network service provider, and go directly to the next step after entering.

3. Restart the wireless router after the settings are complete.

Next, go to the wireless settings, set the SSID name, this item defaults to the model of the router, this is just the device name displayed when searching, you can change it according to your own preferences, easy to search and use. The rest of the setting options can be defaulted according to the system and do not need to be changed, but a password must be set in the network security settings to prevent being rubbed on the network. Once the setup is complete, click Next.

--**The tutorial is as follows.

Open the browser, enter in the address bar and then the account and password are admin, log in and click to run the wizard, enter the broadband account password, set the wireless password, and finally the route will automatically restart, and then click the wireless signal icon in the lower right corner of the desktop, try to connect the route, enter the wireless password, and you can access the Internet after successful connection!

Turn on the wifi function in your laptop, automatically search for wifi signals, find your own wifi signal, click connect and enter wifi password, and the connection is successful! ok！

It's OK to take a look at the manual, the manuals of the router.