CAD Delete Command The selected line does not change the dashed line

System variables: Change the command highlight to 1.

Has it always been like this or is it all of a sudden? If it's the latter, it is recommended that you try it rebooting, or kill it.

If you don't know much about the things in the system, it's best not to change them, so as to avoid errors and all kinds of unnecessary trouble.

<>1. First of all, we select the mouse and click the "Tools" function tab in the command line above the CAD.

2. After that, select the last "option" function in the pop-up page in the toolbar.

3. Select the function option of "Selection Set" from each menu in the options.

4. Select the dialog box "Select and execute first" in the page mode, click "OK", and the setting is successful.

Summary. To change the selected target in CAD from a dashed line to a solid line, you can do it by following these steps:1

Select the Style Manager command in CAD, or enter the Style Manager command styledit and press Enter to confirm. 2.Select the currently used style in the Style Manager and click "Modify".

3.In the Linetype tab, select the linetype that you want to modify, such as Dashed Line. 4.

Modify the style of the linetype, for example, to a solid line. 5.Click OK to complete the modification of the linetype style and exit the Style Manager.

At this point, the target is re-selected, and it should become a solid line.

To change the selected target in CAD from a dashed line to a solid line, you can do this by following these steps: Loose or Kirilla 1Select the "Style Manager" command in CAD, or directly enter the "styledit" command of the Style Manager Tuankai, and press Enter to confirm.

2.Select the currently used style in the Style Manager and click "Modify". 3.

In the Linetype tab, select the linetype that you want to modify, such as Dashed Line. 4.Modify the style of the linetype, for example, to a solid line.

5.Click "OK" to complete the modification of the linetype style and exit the style manager. At this point, the target is re-selected, and it should become a solid line.

Excuse me, but please go into more detail?

To change the selected target in CAD from a dashed line to a solid line, you can do this by following these steps: Loose or Kirilla 1Select the "Style Manager" command in CAD, or directly enter the "styledit" command of the Style Manager Tuankai, and press Enter to confirm.

2.Select the currently used style in the Style Manager and click "Modify". 3.

In the Linetype tab, select the linetype that you want to modify, such as Dashed Line. 4.Modify the style of the linetype, for example, to a solid line.

5.Click "OK" to complete the modification of the linetype style and exit the style manager. At this point, the target is re-selected, and it should become a solid line.

You search for it*lsp file, including text written on highlight, see if there is a default loading of lsp program contains a statement to set similar parameters, if so, delete it and try.

Command op to go into the manager settings and see if it has been modified. I can't find the specific, click on the initial configuration in the configuration, and mainly look at the menu in the display Attached figure.

I've never encountered such a problem... Ever tried adjusting the pixels of your monitor?

10 miles with OP to set it up and you're good to go.