How can the balance glue of the motor be added quickly?

Air Intake There are two types of air intake parts, flat and cylindrical, that can be seen in various professional tuning shops. The former is called high-flow intake style, and the latter is commonly known as small mushroom or mushroom head, and its function is to reduce the intake resistance of the air filter, increase the intake flow and oxygen content of the engine cylinder, and make the combustion more sufficient, which is directly reflected in the increase of horsepower, the throttle is more sensitive, and the engine speed is increased faster. Tips for use:

The market price of air intake style is about 800 yuan, and the price of mushroom head is about 400 yuan. The air intake equipment is generally an external design, installed at the air filter, and each model has its own corresponding matching style. The mushroom head can be adapted to various models.

Generally washable. The exhaust intake is smooth, and the exhaust is not smooth. To improve the exhaust, replace it with a thickened exhaust pipe.

There are two types of exhaust pipes on the market, one is the original exhaust (S-tailpipe) and the other is the inline exhaust. The original exhaust pipe meets the original design standards, so there is no problem in terms of noise pollution, but it will lose the power of the engine. If you're looking for a racing look, you can opt for an inline tube.

There are small holes in the side walls of the inline pipes, which are used to eliminate the high-speed airflow in the high-pitch part and retain the bass part, which is deeper in sound and closer to the feeling of racing. However, there is a lack of paper barrier in the straight pipe, which is easy to cause excessive noise. Tips for use:

The original exhaust pipes are made in Hong Kong and Guangzhou, and the prices range from 2,000 yuan to 4,000 yuan. The inline pipe is cheaper, and the price is about 1500 yuan. Fuel Booster There are many fuel booster products, the most common is mechanical fuel booster, retrofitted.

It is easy to fall off and make the motor burn out.

Most reducers can not be adjusted fast or slow, as long as the motor speed can be adjusted, the motor type is different, the speed regulation method is also different, DC has to change the voltage speed regulation or change the magnetic field strength speed regulation, AC motor has frequency conversion, pole change, number of rotor string resistance and other speed regulation methods

Here are a few things to keep in mind:

First, whether the reducer is a reducer that determines the speed ratio;

Second, whether the use environment allows the motor to regulate the speed.

Generally, the motor reducer is used together, if you need to adjust the speed, you need to adjust the output speed of the motor, are you the rack and pinion for output or what mechanism?

Motor dynamic balancing method:

Preferred Selected Test Unit:Toggle the vibration units (g, mm s, um).

Start-up detection of initial vibration of the motor:Test Weight Motor:Drill a small hole in the motor flange anywhere, or press a small piece of cement or add a counterweight screw.

After turning on the motor, the measured vibration value may increase or decrease.

After the measurement is completed, stop the motor stop.

Define 0 degreesEstimate the mass of iron filings at the borehole, or the mass of the cement or the number of grams of the lock screw, which can be measured with an electronic scale.

Angle: The punching place, the balance cement place, and the screw place are defined as 0 degrees.

There are several options for balancingMethod 1: Weighting, deduplication function (commonly used by motors to reduce weight).

Method 3: Drill hole calculation accurately tells the angle and depth of the hole.

Method 4: Component calculation (a certain angle is not suitable for counterweight, and the counterweight is distributed to other angles) Method 5: hole allocation.

The test methods of different instruments are also different, and the above Hongfu Xindynamic balancer PY2700 is an example.

Refer to the international ISO-1940 dynamic balance classspindles of precision grinding machines; motor rotors; The precision spindle allows for unbalanced residuals.

I suspect that after the motor base is dampened, the force transmitted to the transmission gear will also change, either here or there. The key is the quality of the motor itself

If you can go around the motor yourself, you can go around it yourself, if you can't go around it, you can just buy an Audi double diamond nuclear fission and equip it quickly.

First of all, it is necessary to choose a good enameled wire, and pay attention to uniformity when winding. It also needs to be matched with strong magnets and rechargeable batteries.

Wrap the coil, wind as much as you run fast, and the magnet should also be magnetic.

There are many kinds of motors, such as single-wire single-winding, single-wire double-winding, double-wire double-winding, double-wire parallel winding, etc., the effect of different winding methods is not the same, and the torque is inversely proportional to the speed, remember to pay attention to the following problems when winding.

1 The wire of each pole should be the same length, otherwise the magnetic flux problem will greatly reduce the performance.2 The wire wound should be as straight and tight as possible.

3. Be careful not to get the insulating paint through when winding and welding, otherwise it will ......You can almost lose 4 When loading the motor, pay attention to the gap with the magnet, 1 2mm is better to stick the rotor with less glue, and the life will be 514633949 reduced

Motor balance mud is also just a kind of AB glue composed of epoxy resin and curing agent, which is environmentally friendly and harmless to people. If you accidentally get it in your hands, you can wait for curing and tear it off directly.

Precision control of motor rotor dynamic balancing.