How to maintain Lianfeng solid wood flooring? How to maintain parquet

Take care of hardwood floors.

1. Room. The internal humidity should not be too large, keep the floor.

Dry, smooth, daily cleaning use a wrung out cotton mop.

Just wipe it; In case of stubborn stains, wipe with a neutral cleaning solvent and then wipe with a wrung out cotton mop, and never use acid, alkaline solvent or organic solvents such as gasoline to scrub.

2. Pay attention to avoid scratching the floor by hard objects such as heavy metal sharps, glass porcelain tiles, and shoe spikes during daily use of solid wood flooring; Move furniture.

Do not drag on the surface of the floor; Do not expose the floor to an open flame or place a high-power electric heater directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor; Prolonged immersion is absolutely prohibited.

3. In order to maintain the beauty of the solid wood floor and prolong the service life of the paint surface, it is recommended to wax and maintain it twice a year. Wipe the floor clean before waxing, then apply an even layer of floor wax on the surface, and wipe it with a soft cloth after it has dried slightly.

4. If a large area of water is accidentally flooded, or the local area is soaked in water for a long time, it should be drained as soon as possible after discovery, and let it dry naturally, and it is strictly forbidden to use electric heaters to dry or expose to the sun.

5. Long-term exposure to strong sunlight, or the sharp rise and fall of the temperature in the room may cause the premature aging of the paint surface of the solid wood floor, which should be avoided as much as possible. There are many misunderstandings about the choice of solid wood flooring, for example, consumers generally believe that solid wood flooring is better than laminate flooring, which is debatable. Solid wood flooring on the tree species and age requirements are very strict, fast-growing tree species can not be used to make solid wood flooring, generally speaking, the age of the trees used to make solid wood flooring are over 80 years old, cut down a tree is less green, in the long run, will affect the ecological environment on the earth.

Consumers are also very picky when choosing solid wood flooring, requiring both no color difference and no scars. Solid wood flooring is a natural material, and it is completely normal for the tree to have a little color difference due to the influence of the environment during the growth process, and it is normal to produce scars, because the tree has to divide the branches, and there are scars in the place where the branches are divided. Now, many solid wood floor dealers are advocating that there is no color difference and no scars, which is misleading consumers that it is impossible for solid wood floors to have no color difference.

At present, some foreign consumers are more willing to choose some color differences and some scars when buying solid wood flooring, because they feel that this is natural.

1. Anti-fouling Every two or three months, you can apply floor wax on the floor. Before waxing, dust and dirt should be removed, and then a clean, lint-free soft rag dipped in wax, starting from one edge of the wooden floor, should be wiped in a ring on the board in turn. After wiping evenly, use the original rag (no longer dipped in wax) to wipe from the edge of the original wipe, and wipe it again in turn according to the above plan.

The waxed floor not only cleans and refreshes, but also protects the paint film and delays aging. When maintaining the solid wood floor, we must pay attention to keeping the floor dry and clean, and do not wet it with water or scrub it with alkaline water or soapy water, so as not to damage the brightness of the paint. If it is dirty or dirty, it can be wiped with a dry cloth.

It is also necessary to wax once a month, but wipe off moisture and stains before waxing. 2. Lacquer use.

After three or five years, you can use the same kind of paint as the first paint floor to repaint the floor. In addition to dust and dirt removal before painting, a fine water sandpaper should be applied, dipped in warm water, and the board surface should be gently sanded to remove the remaining oil stains on it, and to grind off the small paint particles left in the last paint. After sanding, wipe it clean with a clean rag and you can apply the paint.

In this way, the painted floor will be smoother, cleaner, and brighter.3. Heat-proof If you encounter heating leakage and water accumulation on the wooden floor, you must wipe it clean in time, and you can't directly expose it to the sun or bake it with an electric stove, so as not to dry too quickly and the floor cracks. If the solid wood floor is not used for a long time, do not cover it with plastic sheeting or newspaper, because after a long time, the paint film will be sticky and lose its luster. At the same time, do not put hot water basins, hot rice cookers and other objects directly on the floor to avoid scalding the paint film.

4. Scrubbing In daily cleaning, you can use a vacuum cleaner to remove it first, and then use a soft cloth dipped in a special detergent or dilution of soap flakes for cleaning. For large area cleaning, it can be done with a sprayer or rotary cleaner. For natural lacquered solid wood floors, water is not good for it, so try to minimize excess water when cleaning, and be sure to wring out the rag when scrubbing.

Oil wax solid wood flooring to remove black rubber wear marks and other stains that cannot be removed with water, can be removed with a soft cloth dipped in low concentration alcohol or a little liquor.

1. Keep the floor dry and clean, and avoid contact with a lot of water. It is not allowed to scrub with corrosive liquids such as alkaline water and soapy water to avoid damage to the paint film, and it can be wiped with a wrung out cotton mop, not with a wet mop, gasoline, flammable materials and high-temperature liquids. 2. Waxing every once in a while, the time interval depends on the finish of the floor paint.

The method is to first wipe the floor with a semi-dry rag and wax it. To spread evenly and "soak" the floor surface, wait for it to dry a little and then wipe it back and forth with a soft cloth until it is smooth and translucent. 3. If you accidentally pour water or leave water on the ground, you must wipe it with a dry soft cloth in time.

After wiping it clean, do not directly expose it to the sun or bake it on an electric stove, so as not to dry too quickly and the floor will dry and crack. 4. Do not throw cigarette butts or matches and other kindling on the floor to avoid scorching the surface of the floor; Avoid sharp, sharp objects, scratches, and heavy objects that are pressed for long periods of time. 5. After paving, the floor should be exposed to direct sunlight as much as possible, so as to avoid excessive ultraviolet radiation of the paint and early cracking and aging.

6. If the paved floor is not inhabited for a long time, it is necessary to open the window frequently for ventilation, and do not cover it with plastic sheets or newspapers. Over time, the paint film will become sticky and lose its luster. At the same time, do not directly contact the floor with objects with high temperatures, if the indoor air humidity is lower than 40, you need to increase the temperature appropriately, if the humidity is greater than 100, you need to take dehumidification measures.

1. After the laminate floor is paved, we generally do not move in immediately, and it is better to wait for a day or two to stabilize the floor before moving in. The maintenance method of the floor after moving in is as follows: if there are metal sharps, glass, magnetic sheets or other hard objects in the home, they should be properly kept, and do not scratch the floor; Open flames, high-power electric heaters, and acids and alkaline materials are prohibited from direct contact with the floor.

This kind of laminate flooring maintenance can make our laminate flooring last longer.

2. Keep the humidity in the room appropriate, keep the floor dry, and use a wringed out mop when cleaning the daily lead. Stubborn stains can be scrubbed with a neutral detergent and then wiped dry with a mop, oil stains, paints, inks, etc. can be wiped with special stain removal oil, do not use acid and alkaline organic solvents, such as soap, gasoline. This is a great point to pay attention to in the maintenance of laminate flooring!

3. The house should be vacuumed regularly to clean the ground to prevent the accumulation of sand or frictional ash layer from scratching the floor. When moving furniture, it should be never lifted and moved and placed gently, not directly pushed and pulled. The floor can not be soaked in water for a long time, if the floor is stagnant in open water, use a dry cloth to absorb it in time to let it dry naturally, and cannot be exposed to the sun or dried with electrical appliances.

4. In order to keep the floor bright and clean for a long time and prolong the service life of the floor, wax should be maintained at certain intervals, and it is recommended to maintain it twice a year. Clean and wipe the floor before waxing, and then evenly apply a layer of floor wax to the fingers, or wait for the first layer to dry and then apply another layer, and wait for the second layer to dry slightly and then wipe it with a soft cloth until smooth and shiny. Laminate flooring does not require waxing and wood paint, and should not be sandpapered and polished.

Because laminate flooring is different from solid wood flooring, its surface is relatively smooth and brighter, and waxing will add to the snake and be self-defeating.

After the parquet is laid, it must be maintained for at least 24 hours before it can be used, otherwise it will affect the use effect of the parquet. Generally, the water resistance of parquet is poor, and it should not be wiped with a damp cloth or water to avoid tarnishing. In the future daily life, it is necessary to maintain the paint part of the composite floor, and the specific measures are as follows:

The humidity in the room should not be too large, keep the floor dry and wet, smooth and clean, and wipe it with a wrung out cotton mop for daily cleaning: if you encounter stubborn stains, you should use a neutral cleaning solvent to wipe it and then wipe it with a wrung out cotton mop, and do not use acid, alkaline solvent or organic solvents such as gasoline to wipe it.

In daily use, it is necessary to pay attention to avoid scratching the floor with hard objects such as heavy metal sharps, glass porcelain tiles, and shoe spikes; Do not mop the floor surface when moving furniture; Do not expose the floor to an open flame or place a high-power electric heater directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor; Prolonged immersion is absolutely prohibited.

That's pretty much it, I have Armstrong's parquet at home, which I saw on their website, you can check it out. Also, their flooring is very nice.

Laminate flooring generally does not need maintenance, wipe with a semi-dry rag when cleaning.

After choosing your favorite floor, how to maintain and maintain the floor is confused by many friends. Today, we will introduce you to the maintenance knowledge of three-layer parquet, so that you can better enjoy the comfortable feeling brought by three-layer parquet!

Once the flooring is installed, you should move in within two weeks. In rooms that are not occupied for a long time or are infrequently occupied, several basins of water should be placed in the room and the amount of water should be maintained, or a humidifier should be used to compensate for the evaporation of water due to the opening of the indoor heating; The indoor environment should not be too dry or too humid to prevent the wood floor from drying out, shrinking or expanding and deforming.

In order to maintain the beauty of the three-layer parquet and prolong the life of the paint surface, wax every month or two, wipe the stain clean before waxing, then apply a layer of floor wax evenly on the surface, and wipe it with a soft cloth after a little drying until it is smooth and shiny.

Prevent strong and long-lasting sunlight from exposing the floor, so as to prevent the paint from aging and cracking prematurely under long-term ultraviolet exposure. Avoid hot and cold air blowing and baking floors from household appliances.

Prevent rainwater from soaking the floor, prevent overflow on the balcony, bathroom, kitchen, etc., and turn off the faucet when traveling or when the water is stopped; In particular, the floor should not be in contact with hot water, and the hot water in the heating pipe should never be spilled on the floor, and it should be dried in time once it occurs.

Prevent hard objects such as heavy metal sharps, glass porcelain tiles, and shoe spikes from scratching the floor; When moving furniture, it should not be pushed or pulled directly on the floor, but should be lifted and moved and placed gently. Furniture that is frequently moved can be glued with a layer of eraser at the bottom.

It is forbidden to place strong acidic and alkaline substances on the floor;

If there are oil stains, you can use an automatic rag or mop dipped in warm water to scrub with a small amount of laundry detergent; In the case of drugs or pigments, the stain must be removed before it dissolves into the surface of the wood.

If the outdoor humidity is greater than the indoor humidity, the doors and windows can be closed to keep the indoor humidity low; If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In humid and muggy weather, you can turn on the air conditioner or electric fan. In autumn and winter, in order to increase indoor air humidity, humidifiers can be used to keep indoor air humidity at 50%-70%.

end precautions.

After the three-layer parquet is laid, it must be maintained for at least 24 hours before it can be used, otherwise it will affect the use effect of the three-layer parquet. Generally, three-layer parquet has poor water resistance, so it should not be wiped with a damp cloth or water to avoid tarnishing.

1) The board is dry and clean, and it is not allowed to mop the floor with a dripping mop, or wipe the floor with alkaline water or soapy water, so as not to destroy the gloss of the paint surface; If the air in your home is dry, make the mop wetter or put a basin of water on the heater or humidify it with a humidifier. 2) Avoid sun exposure, so as to avoid long-term aging and cracking of the surface paint under ultraviolet radiation. 3) The board surface carelessly occupies the stain should be removed in time, if there is oil stain, you can use a rag dipped in warm water dipped in a small amount of laundry detergent to scrub, if it is a drug or pigment, it must be removed before the stain seeps into the wood surface.

4) Try to avoid long-term contact with water, especially not with hot water, so once there is hot water sprinkled on the floor, wipe it dry in time. 5) Waxing every three months, and clean the stains on the surface of the floor before waxing. In fact, it is okay not to beat, but it can be waxed frequently, which can maintain the finish of the floor and prolong the service life of the floor.

6) Sharp objects scratch the ground, do not throw cigarette butts on the floor or place things that are too hot directly, and try to avoid dragging heavy furniture.

But you don't have to follow that exactly, after all, the Volkswagen brand he said will be a little different.

The main thing is not to accumulate water for a long time, and try not to push the furniture directly (the wear resistance of parquet, you know).

Nothing else is too important.

- A small tail from the floor of Santa.