LAN Virtual Dialing New installation How to connect to the router

Hehe, the landlord is FTTx+LAN like me. Of course, there will be no cats, otherwise how would it be called a virtual dial pinch. The landlord only needs to use the network cable to connect directly to the WAN port of the router, and then pull the network cable from the LAN port of the router to the machine you want to access the Internet, and the same as ADSL if you set it, PPPoE dial-up, enter the password on it, virtual dial-up is a means for ISP to limit your traffic and Internet time, and the benefit is that the bandwidth allocated to you is exclusive to you, and it is a public IP (BT donkey SF has love).

But the downside is what I said, he may only give you between 2mbps-10mbps bandwidth.

If you still need to enter your username and password, the settings on your router will be the same.

If your carrier gives you an IP for you to set up, then select the "Static IP" mode in the router.

Nothing else.

If your network doesn't give you anything like an account, and your computer can be turned on to access the Internet directly without dialing, then set the "dynamic IP" mode in your route.

My home network is a network cable into the house, and my wireless routing is the same setting as usual, the same as the previous use of cat dialing, no change.

Directly connected to the route, and then set the login and password on the route, and then connect to the computer from the route, and you can access the Internet.

This should be networked. Go to the router and select the settings, select the static IP, and then fill in the above.

The steps to install the router are as follows:

1. First of all, we connect the router to be installed with the power supply, and connect the network cable with the WAN interface.

3. After opening the wifi settings**, the login dialog box will pop up first, we enter the corresponding username and password in the dialog box, the user name is "admin", the password is marked on the router, and after entering the username and password, you can log in to the wifi settings**.

4. After entering the home page, we first find the menu bar on the left side of the interface, find and click the "Setup Wizard" option to enter the WiFi Setup Wizard.

5. After entering the wifi setup wizard, we can choose to let the router automatically select the Internet mode, PPPoe connection, dynamic IP connection and static IP connection, generally we choose to check the box to let the router automatically choose the Internet mode, and then click Next.

6. The interface shows that we can enter the Internet account and Internet password, the Internet account and Internet password are the broadband Internet access account and password opened in China Mobile Unicom Telecom at home, fill it in the dialog box and click Next.

7. Enter the next step after the account and password are entered correctly, at this time we set the basic parameters and security password of the wireless router, the most important thing is the setting of the psk password, the psk password is the password for connecting to the wifi after turning on the wifi, this password is generally more than 8 digits and contains letters and numbers, the password setting is too simple and easy to be cracked by others The password rubs the network.

8. After setting the above steps, click Finish, so that the installation of the wireless router can be solved through the above steps.

How to install a wireless router and how to connect the router.

Before setting up the phone, plug in the power supply of the router and plug the network cable into the WAN socket of the router, if the WAN light on the router is flashing, it proves that there is a signal source.

2.Next, enter the mobile phone [Settings] - [Wireless Network], you can see that the router has automatically created an initialized wireless network, some Android phones need to check [Network Notification] to see, directly connect to this wireless network, no password is required, but you can't access the Internet for the time being.

3.Open the browser of the mobile phone, enter and open it in the address bar (the login address of different brands of routers is different, you can see the label or manual at the bottom of the router body).

Then you will enter a login interface, you need to enter the default initial username and password of the router, generally the initial username and password are admin, there are also some routers that do not have a password for the first time, and you need to create a password yourself. (If it's neither, then look at the labeling or instruction manual on the bottom of the router body).

4.After logging in to the router, you can enter the Internet access settings, select the Internet access method, generally PPPOE or broadband dial-up Internet access (you can also choose to let the router choose automatically), and then enter the broadband account and password given to you by the network provider, and click Next.

5.The next thing is to set up the wifi account and password, remember to turn on the wireless broadcast, otherwise you will not be able to find this wifi on the mobile phone, after the setting is completed, the mobile phone can be connected to the wifi Internet access.

Newly bought router installation method:

Home Network Environment Cabling]:

1. There is a telecom cat: the telecom cat --- router WAN port; The LAN port of the router --- a computer.

2. No telecom cat: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. Open the browser - enter the general router address is this) incoming route - enter the user name and password, (the default is admin).

Set Router Dialing]:

The IP and DNS settings of the computer are automatically obtained.

1. Enter the router. In the [Setup Wizard], select [PPOE Dialing] (some are ADSL dialing), follow the prompts to enter your Internet username and password, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPOE Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

The specific installation steps are as follows:

1. Insert the network cable into the yellow socket (the round socket is connected to the power supply);

2. At the bottom of the router, there is a management page of this router, open 360 search and search for this**, the first time you go in, you will be sure of your login password, you have set the login password, and the second time you enter will be called to enter the login password as shown in the figure.

3. After entering, click on the Internet settings at the bottom of the page, then click on the "Common Settings" Internet access mode at the top and click on the broadband dial-up Internet access, then enter the broadband account and broadband password given to you by the operator, and finally click the save button below the broadband password.

4. If you want to use your mobile phone to connect to wireless wifi, click on the wireless settings below, click the wireless status as "on", and then enter the wireless name and wireless password (this is not required, the name and password are entered by yourself). When you're done, turn on your phone's Wi-Fi to find the wireless name and enter the password.

5. After entering the account and password correctly, enter the next step, set the basic parameters and security password of the wireless router, as shown in the figure: the wireless status is "on", the SSID is the account number displayed by your connection to the wireless network, you can use the default or set one yourself, the channel "automatic", the mode "11BNG mixed", and the band broadband "automatic".

The most important one is the setting of the PSK password, this is one to be set, if you don't set the password, the people around you can search for your wireless message and eat it for free, and then it will affect your own network speed. The password is more than 8 digits, preferably in the form of letters and numbers, if it is a simple number, it is said that many mobile phones can be automatically cracked by software.

6. Set it up and click OK. At this point, the wireless router is set up.

Does the cat connect to the wireless router, do you do this:

Plug in the wireless router, don't answer the cat first, connect the computer to any LAN port of the wireless router, enter the setting page, and set it according to the PPPoE (ADSL virtual dialing) method. Then set the SSID, encryption method, and password. Save, restart.

After setting up, connect the network cable from the cat to the WAN port of the wireless router.

If the cat is connected to the wireless router: plug in the wireless router, do not connect the cat first, connect the computer to any LAN port of the wireless router, enter the browser to enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method. Then set the SSID, encryption method, and password.

Save, restart. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

First, connect your router with your computer, log in to the router through the browser, and enter the routing settings interface. "You can also go down in the order when you just log in" Find the WLAN port settings, select PPPOE, and enter the account password to make sure that your cat is connected.

Plug in the internet cable first'''It turned out that the plug WAN port that was plugged into the computer'''Then connect the computer to the LAN port with a network cable'''Or connect to wifi'''There is an address and password on the back of the router'''Open your browser and enter the address'''Password'''Please refer to the manual for others.

The network cable coming in from the outside is connected to the WAN port, and the 1234 port is connected to the computer.

Look at the back of your router or the manual, enter the router gateway in the browser address bar, and there is a setup wizard after entering....Once the setup is complete, restart the router and you're good to go.

Power. Connect the broadband connector to the WAN port of the router, and plug a network cable from any other port to connect to the computer.

Log in and go to the wireless settings to restart after all settings.

How to configure the router:

1.The router is connected to the network.

2.The system is connected to the router.

Turn on the wifi of the computer, search for the default wifi name of the router (the nameplate on the back of the router is written), and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

3.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

4.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband account password, and select Automatic connection as the connection mode.

If DHCP is automatically obtained, you do not need to enter this field.

5.Set the wifi name and password.

Go to Wireless Security in the Wireless Settings and select WPA2-PSK mode for Security Mode. Select AES for WPA encryption rule. Set up a wireless network key. The router will automatically restart after setting, please enter a new wifi password to connect.

6.The configuration is complete and you can enjoy the network.

How do I set up a newly purchased router?

Broadband passwords and account numbers. Then follow the instructions and say it's done.

You ping the route first, and if you can ping, it's not your problem.

Are you using the telecommunications of Starry Sky Speed?

That's going to give telecom a **.

The installation and setup of the router is as follows:

1.First, connect the line between the router, the broadband modem, and the computer.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.After logging in to the background, select Quick Settings, enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

4.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

5.Confirm it once the input is complete, and then restart the router to take effect.

Tool materials required: Two routers.

Here's how to configure the first router A (main router) as follows:

1. One end of the network cable is connected to the WAN port of the router, and the other end is connected to the LAN port of the cat;

2. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box);

3. Click Next;

4. Select PPPOE (ADSL Virtual Dialing) in the Internet mode, and click Next;

5. Enter the broadband account provided by the broadband operator in the Internet account and the broadband password in the Internet password;

6. Set the wireless network name in the SSID, select the WPA-PSK WPA2-PSK encryption method, and set the wireless password of no less than 8 digits in the PSK password;

7. Click Restart, and the router is set successfully.

2. The configuration method of the second router B (secondary router) is as follows:

1. One end of the network cable is connected to the LAN port of the router, and the other end is connected to the network port of the computer;

2. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box);

3. DHCP server - DHCP service, check not enable DHCP server, click Save;

Then the secondary router can be changed to be different from the IP of the main router);

Click Save when you're done.

3. After the setting is complete, one end of the network cable is connected to the LAN port of Router A, and the other end is connected to the LAN port of Router B.

Note: The WAN port of Router B is idle.