-
Just go and apply for an ADSL. Isn't your internet speed fast? Why switch to dialing?
If you use ADSL on a stand-alone machine, you don't need a router, and you can use it directly by connecting it to a computer.
-
This requires upgrading the router.
-
How can I not enter, no response or big delay!
Ask your in-game friends if they can get in, and sometimes the area you're in may be maintained.
-
No, when you use the cat directly or connect directly to the external network, the port is only restricted by the cell switch and the firewall on your host, and the general cell switch will not block the port, as for your host firewall, just turn it off.
-
It's not better to set up a LAN in a cell, but the access speed is limited by the speed of the user's PPPOE dial-up.
-
The wireless name SSID code is in Chinese, changed to English.
-
Of course, you can't dial directly when you connect to the router, your situation should be a DNS error, it is recommended to set the DNS address of the local operator in the router.
-
The telecom network should be fine.
-
First of all, after plugging in the router, you can set it in the settings interface of the router, enter the IP address of the general router settings interface in the address bar of the browser by default, if not, you can check what the setting address of your router is in the computer, the method is to start-run-cmd, and then enter ipconfig all, the address of the local connection gateway displayed in it is the setting address of the router), After entering the router's settings interface, you can select the items you need to set and follow the prompts to save and exit after setting!
-
Connect it with a router You can get it directly without setting, and the setting is to set up the cat and it has nothing to do with the router.
-
The computer can't dial up, but with the routing settings can be a computer to access the Internet normally, then there is no problem with the network, this is a bit difficult to check, it is recommended to find the network manager.
-
The connection mode is set according to the access mode you have from the community broadband, if the community gives you the account password, that is: PPPoe connection, if you are given a fixed IP address, that is: static IP connection, if you are called to automatically obtain the IP, that is:
Dynamic IP connection, generally you need to set it correctly before you can access the Internet, that is to say, if the setting is wrong, it is not caused by a drop in the connection, but not a connection. If you can't connect to the route, it may be caused by the route "feigning death", and you can only restart the route or dial the power to turn it on again.
-
This first depends on what kind of Internet access you have, if you have a cat, that is, you have an account password, use ADSL virtual dial-up, connect the cat to the WAN port of the router, specifically refer to if it is a LAN, you can choose to automatically get IP, dynamic IP, that is, when you don't use the router, you can access the Internet by directly obtaining IP. If it is a static IP, it is a dedicated IP provided to you by the network service provider.
-
Select ADSL Virtual Dialing (PPPOE), set the wrong relationship, and reset it.
-
It is a router quality problem, which may be high temperature or heavy load.
-
The phenomenon you are talking about is that the router software itself is unstable and crashes. Go to the manufacturer's ** to see if there is a firmware update, if so, it may be possible to solve it by upgrading.
It has nothing to do with your quick setup.
-
Try it with a route first (refer to the instructions for purchasing a route for setting up the method), if you can't achieve network sharing, it may be that the network you use is disabled for routing; In this case, you need to buy a regular switch, and then set up the dial-up computer to network sharing, and the other computers connected to the switch can be set up as if they were routers.
Hope it helps!
-
You need your broadband account password With a router, you don't need to dial up the Internet.
-
Same as the normal setting, the router comes with the manual, just follow the above settings.
-
Same as the normal setting, the router comes with the manual You can see it at a glance.
Setup for both routers:
1. The router used to connect to the external network is the first router, and we will use this router as the main router. If your router is newly purchased and has been restored to factory defaults, then its IP should be... >>>More
<>1. The network cable that comes out of the cat is connected to the WAN port of the wireless router (some are called Internet), and the LAN port of the wireless router is connected to the computer. >>>More
There is no need to set up, but the incoming cable Please plug in any port of 1234, do not plug in the normal port, because your network environment is LAN!
If the laptop wants to use a wireless network, first of all, there must be a wireless router or a wireless network card to do a soft AP, if you have a wireless router at home is Tengda, you can set up the router according to the following steps, after setting, the laptop can use the wireless network. >>>More
It may be that the routing is not good, look at it differently.