How to dial up with a router for e surfing broadband

The steps to set up autodialing on your router are as follows:

1. Log in to the router address with a browser.

2. Enter the username and password, usually admin.

3. In the WAN port settings, select PPOE to dial up the Internet, and enter the Internet access and password.

4. After saving, restart the router to complete the Internet settings.

A router is a device that connects various LANs and WANs on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

The main difference between routing and switching is that the switch takes place at the second layer of the OSI reference model (data link layer), while the routing takes place at the third layer, which is the network layer. This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

According to your specific routing model, it is generally the same, you look at the back of the route, there is a web address, user name, admin, password admin, go to the network configuration, pppoe connection, enter your OK.

The process of setting up dial-up connection for e-Surfing gateway is complicated, and how to do it is described next.

2.Pull the fiber from the base station to your home into the fiber G port. (This optical fiber is pulled to your home by a telecom technician when you apply for broadband and splices the head) as shown in the figure below

3.Enter the default username: useradmin and password: wibx6 to enter the home page of the management interface.

From this screen, you can see whether you are connected to the Internet or not, how many wired and wireless devices are connected, and much more.

As shown below: 5Click the settings button in the upper right corner of the management interface (as shown in Figure 1) to enter the advanced configuration interface, where there are three main configuration items: broadband configuration, wifi configuration and LAN configuration.

It should be noted here that unlike other network management systems in the past, there is no WAN port configuration here, but a broadband configuration. In the past, in the WAN port configuration, we needed to enter the broadband account and password reserved at the time of processing, but here it has become a broadband identification code, what is this thing?To put it simply, it is to replace the broadband dial-up Internet function with a broadband identification code, and activate the data service in the background through this identification code.

This identification code and password should be checked with the maintenance personnel or the telecom business office or the number 10000. As long as this is entered correctly, the network will be connected first, and the next thing is close to personalization. For example, the WiFi name, the WiFi password, and the IP address pool and network segment in the LAN, etc.

Then you can change the wifi password in the position marked 4, try to set a password that is not too simple and easy to remember. Because after a long time, it is common to forget the password.

1. First open the browser of the computer, and then enter the IP address of the router in the address bar.

2. Enter the management plane of the router and click "Login".

3. After logging in to the router, change the mode to "PPPoe" mode in the advanced settings, and enter the Internet access and online password (i.e., Mizhen QR code) at the same time.

4. After filling in, then check "Auto connection, automatically connect after boot and disconnection" to set up Telecom Tianyi wide disturbance inspection with cat self-lead road Yu Li Bi by the device automatic dial-up Internet.

Summary. 1. Insert the 3G 4G network card into the gateway first, wait for the system to test the device after booting, and after the detection is completed, the 3G 4G connection button will be displayed on the gateway panel2. Click the 3G 4G connection button, and the dialing setting dialog box will pop up, click "Dial Settings" in the dialog box;3. On the dial-up setting interface, select "China Telecom" or "China Mobile", enter the dial-up number, username and password according to the prompts, and click the "Save" button4. After saving the dialing settings, click "OK", and the gateway will automatically dial up the Internet.

During the new crown pneumonia period, do not go to the nuclear places where the amount of people gather and gather. If you must go out, wear a mask, do a good job of protection, wash your hands frequently, develop good personal habits, and protect yourself and others. Health is a blessing, and peace is happiness.

There is no need to restart in 23 years, we will move forward hand in hand!I wish you good luck with your family, friends and health and safety.

1. Insert the 3G 4G network card into the gateway first, wait for the system to test the device after booting up, and after the detection is completed, the 3G 4G connection button will be displayed on the noisy gateway panel; 2. Click the 3G 4G connection button, and the dialing setting dialog box will pop up, click "Dial Settings" in the dialog box;3. On the dial-up setting interface, select "Shengming China Telecom" or "China Mobile", enter the dial-up number, guess the account name and password according to the prompts, and click the "Save" button; 4. After saving the dialing settings, click "OK", and the gateway will automatically dial up the Internet.