How do you recover your computer s hard drive after it is set as a wireless network drive? Hurry up

My advice is to use diskgen, but you don't want to use third-party software.

I'm also your problem, if you get it right, tell me, my QQ is 648072626

Desktop-My Computer-Right-Click-Management-Storage-Disk Management.

Reinstall the system, format the hard drive, and pay attention to data backup, good luck.

Hello lz.

The first problem may be that the hardware configuration of your machine does not match the software. Just like the theme of Win7 can't be applied to XP. If the software was available before, it was a problem with the system files of your C drive, and you could reinstall it to solve it, but the C drive could not be written, that is, there were bad sectors on your hard disk, and the solution was as follows:

1.Check whether the hardware is damaged, especially the hard disk to use bad sector detection to see, if only some bad sectors are detected, try antivirus, because the virus will cause the file data of the C drive to be messed up, because I have had a similar situation before and then formatted... Let's start with that.

2.Check the compatibility of the hardware, some hardware drivers will be incompatible after the system is reinstalled (such as realtek sound card, etc.), the solution is to update the driver. However, there are fewer cases of incompatibility of hard disks...

3Try to change the installation disk,Some D version of the installation disk is sometimes because the quality of the disk is too poor and the optical drive can not be recognized,Try other installation disks,The installation file is best in the U disk。 If you have a ghost backup on your computer before, it's a good idea.

4. If the above methods do not work, it can only be recommended that LZ go to the hardware repair store, where the important data is now backed up, and then ask a professional to repair it.

Hope that helps.

When reinstalling the system, some data is not comprehensive, there is an error, there is a problem with the system disk or the optical drive reading problem, it is recommended to try a different system disk!! Sent to your mailbox, I hope it can help you, hope praise!!

1 The C drive was not formatted when installing the system. Direct override of the installation.

2. Your software is not registered in the heart-shaped system. That is, the new system does not have your software in the registry.

Recommendation: Clean up the registry. Reinstall the software.

Are you a brand machine or install it yourself, if it is a brand machine it may be equipped with a restore card or something, open the case and take it down. It's also possible that there are hidden partitions preventing you from redoing the system. If there is a hidden partition, you can find a boot disc, go to PE, and in Disk Management, delete the hidden partition, so that you can redo the system.

The conditions you give you are too few, it is better to be more detailed, if you don't want any data on your computer's hard drive, you can repartition the entire hard drive and redo the system.

If there is an error during the installation process or there is a potential virus on the hard disk, change the system disk and install it again. If you can't do it, it's better to get rid of it.

The system loses files due to improper shutdown reasons.

Reinstall the system.

This is supposed to be a computer system that is not installed properly, and if you think you can't install it well, you can try to spend money to install it.

Try changing the hard disk in the BIOS to SATA compatibility mode.

What kind of system did you install, it wasn't installed properly! Reinstall!

A very powerful hard drive data recovery tool. It can help you recover lost data and rebuild the file system. EasyRecovery doesn't write anything to your original drive, it mainly rebuilds the file partition table in memory so that the data can be safely transferred to other drives.

You can recover data from hard drives that have been damaged by viruses or that have been formatted. The software can recover hard drives that are larger than . Long file names are supported.

Corrupted hard drive data blocks like missing boot records, BIOS parameters; partitioned tables; FAT table; The boot area can be restored by it.

finaldata

finaldata Enterprise Edition.

When you delete a file in Windows, only the directory information is deleted from FAT or MFT (NTFS). This means that the file data remains on your disk. So, from a technical point of view, this file is recoverable.

finaldata is used to recover lost data through this mechanism, and it is no exception after emptying the ** site. Also, finaldata can be easily recovered from formatted files and files corrupted by viruses. Even in extreme cases, it can be recovered if the directory structure is partially corrupted, as long as the data is still saved on the hard disk.

EasyRecovery is a powerful hard drive data recovery tool that can help you recover lost data and rebuild your file system.

No, it's recovered.

Brothers take love by the way

The partition table is broken and the drive letter is incorrectly labeled.

There is a reply software on the Internet, you go and find it.

Recovering data is more difficult, you can try easyrecovery software, if it doesn't work, then there is no way.

As for the hard disk partition, you can use the disk management tool that comes with win7, right-click on the desktop "computer" - management "- disk management", right-click on the cube you see is the same as the C disk, click "compress volume" to enter the compressed amount of space, click OK, to make it bigger, you can directly right-click on the extended volume.

If you use the XP system, right-click on "My Computer", select "Manage", you can enter the "Computer Management" interface, find "Disk Management", right-click on the various drive letters like the square you see, start from the rightmost F drive, right-click on the F drive, select "Delete Logical Drive", so that you can delete a partition, and so on, delete all the d e f drives, and then re-establish the partition, assign the drive letter, so that you can create a new partition.

The C drive cannot be deleted, because the system is on the C drive, but since the C drive is still 50G, then this has no effect on the partition).

If you are in Windows 7 system, right-click on the desktop "Computer" - Management - Disk Management", right-click on the H disk and J disk that you see as fast as the square, click "Compress Volume" to enter the compression amount space, click OK, and right-click to expand the volume directly to make it bigger.

XP system, right-click on "My Computer", select "Manage", you can enter the "Computer Management" interface, find "Disk Management", right-click on the various drive letters like the square you see, start from the rightmost H disk, create a new partition, assign a drive letter, so that you can create a new partition.

Start with a USB flash drive, enter PE, open DiskGenus, Tools, Data Recovery... Not necessarily, do your best.

Repartition and redo it, the data is gone.

There is a partition tool in PE to open a new partition, d, e, f do you understand?

You go to the society to look for it, and now there is a kind of person. It's pretty good at doing data recovery, so ask them if they have a way, and they won't, and then you'll be dizzy.

It should be that the wireless network card has no driver, and 1394 is not a wireless network card, but a high-speed transmission medium used to establish a peer-to-peer network between digital products.

It is not right to have only one 1349 connection, there should also be a local connection and a wireless connection. It's a book, right? What system did it turn out to be?

The content in the BIOS is much the same, and the brand machine will only be simpler than DIY.

It's usually just a simple onboard device setup, boot boot options, and so on.

Branded machines will only be simpler than DIY.

You write it and I'll explain it for you.

You can try to change the language type in the BIOS.