Printer problem, help, printer problem, urgent

You may have ordered the wrong printer model, first power off the printer, and then there may be a small icon of the printer in the lower right corner of the computer taskbar, if there is, double-click it, and then clear the printed document, until there is no printed document displayed inside, and then turn on the printer, put in the paper, see if it can be played, it should not continue to play, and then you confirm the printer model set when printing in the computer, it must be consistent with the printer used, and it is OK to print again.

Maybe the sprinkler is plugged.

Wash down.

If you can disassemble the drum, the scraper and the charging roller will be cleaned. I won't dismantle it to buy a domestic drum, more than 200 quick money, and it must be good to install it.

You take the toner cartridge out. Lay flat. 5 screws can be seen.

Tear it down. Open it. Pour the powder inside into the newspaper (anything else is fine), see that there are three screws on each side of the drum, tear it apart, and pull it apart.

You can take out the drum core. (The blue is round.) Use a hair dryer to blow the inside of the drum box clean.

After that, I put the drum core back in and pour the powder into the newspaper drum as well. Just pack it up. Don't want to do it yourself.

It's called a technician. That is, money damn it.

Don't listen to people who can't be distinguished by laser inkjet, change drums at every turn, so rich?

First of all, you disassemble the drum (Samsung's drum is easy to disassemble), then blow the inside clean, and then put it back to see, to ensure that there is enough powder inside, if you can't operate it, you have to call a technician to help you get it, dozens of dollars.

Just to clarify:

1. If the normal ** directly click to print, the background is all black after the photo paper comes out.

2. This description has been modified in color management, not the system default;

3. As shown in the figure below, when I tested printing, (4 positions) color management - advanced modified the agfa: option, resulting in ** all black (1 position) after printing.

4. Modify back to the default system and then print, ** is normal.

Note: Color management - advanced modified to agfa This option itself is changed for some**can't be opened.,I didn't expect it to affect the actual printing**.

Dear, you are well prepared Happy to serve you, your problem: Printer troubleshooting printer problems are as follows:1

First of all, determine whether the printer is normal when it is installed, and whether the data cable connection is loose. 2.Set the printer you want to print to as the default printer; 3.

Poor printer print quality: It may be due to a clogged printhead or dry ink that needs to be cleaned or replaced. Also, check that the printer driver settings and the Print Quality Hail Destruction option are correct.

4.Printer Paper Jammed or Unable to Feed: Check that the printer feed channel is blocked by foreign objects and that the paper is placed correctly.

Query the printer's manual or search for solutions to related problems based on the error displayed by the printer. Common errors** include wrong cartridges, jammed paper, and wrong connections. The above is my full reply, do you have any other questions?

I can answer the questions for you!

Summary. Hello dear, happy to answer for you. The printer cannot print most of the time due to improper use, installation, and setting of the printer, and viruses, damaged printer drivers, and faulty printer ports will also cause the printer to fail to print.

Hello dear, happy to answer for you. The printer cannot print most of the time due to improper use, installation, and setting of the printer, and viruses, damaged printer drivers, and faulty printer ports will also cause the printer to fail to print.

1. The printer is not in the online state, so the printer cannot be printed on most printers, there is a small light indicating the online status next to the "online" button, and the online indicator should be in a solid state under normal circumstances. If the light is not lit or flashing, the connection is not normal. Please check whether the printer power is turned on, whether the printer power switch is turned on, and whether the printer cable is connected correctly.

2. Turn the printer back on If the online indicator shows that the online is normal, please turn off the printer first, then turn it on, and try to print the document again. This can clear the printed document data stored in the printer's memory and solve many problems, but sometimes this method can cause the printout to be messed up and require a system reboot before printing can work.