Kneel down to the master computer blue screen, you can t enter the system, and you can t enter the s

There is a way to extract. Based on years of experience, there are three approaches.

1.Use the Win PE disc system to boot, back up the data of the C drive to other disks, format the C drive, and reinstall the system. Don't move the other plates. Install the system, install antivirus, kill immediately, and do not open other disks.

2.Remove the hard drive, connect it to another computer, use it from the disk, first disinfect the virus, copy important data, and then connect it back to the original computer. Reinstall the system.

Boot and make a ghost mirror. Then format and reinstall the C drive system. Other disc compartments.

Then use the ghost mirror browser to extract the data in the ghost image file.

My Documents desktop path: C: Documents and Settings Liu My Documents

C: Documents and Settings LIU Desktop.

Replace liu with your username.

I don't know if you can use DOS, you can use the CD to start into DOS, enter the directory of Rising, there is an antivirus program for DOS system.

Memory problem, you unplug the memory Use an eraser to clean the gold finger and see if there will be a problem stop: 0x0000008e means that there is an error in the memory, causing the software to stop running.

Don't look at the above so much.

You just swap out the memory and you're good to go.

To resolve this issue, follow these steps:

1. Remove some memory modules installed on the computer. Keep at least the RAM necessary for your computer to get up and running Windows XP. The recommended RAM when running Windows XP is 128 MB.

The minimum is 64 MB and the maximum is 4 GB.

For example, if you have two 256 MB memory modules installed on your computer, remove one of them.

2. Restart your computer and run the installer.

3. If you still receive the error message described in the "Symptoms" section of this article, go to step 44, remove another memory module, or install this RAM into another memory slot.

5. Restart your computer and re-run the installer.

You may need to restart your computer a few times to determine which memory module is not working properly.