If you don t do Jiangmin antivirus scanning when you boot up, Windows will delay write failure, why?

Let's do a disk check and run the chkdik f command.

Generally, the Windows delayed write failure prompt is usually due to file corruption inside the system disk (C drive).

Solution: You can try to use the disk management tool to repair, the way is to go to the computer, right-click on the C drive, select Properties, find the tool, and then select "Start to check for errors", then select the automatic repair and sector repair options, and then start to execute, and wait for it to finish to solve the problem.

If you have been infected with a virus, it is very likely that it is a Trojan horse. It is recommended to install the system from the new partition, it is estimated that you have little hope of installing antivirus now, and it is not as easy as installing the direct grid from the installation.

Uninstall and reinstall Sogou Pinyin, and there will be no problem, prompting you that there is a problem with Sogou Pinyin.

It is possible that the hard disk has bad sectors, you can boot it with a CD, and then scan the hard disk with the MHDD in the DOS toolbox to see if there are any bad sectors.

It may also be that there is a problem with the circuit board of the hard disk, and you had better back up the data in the hard disk.

Another solution to defer write failures (cache write failures)!

1.If there is no problem with your hardware, follow these steps:

Right-click"My computer"--- Advanced --- first setting--- Advanced --- change the --- point C: disk.

- After > point customization (512 memory), enter 2048 --- to set the --- point in both boxes to determine the four reboot computers!

The experiment shows that when the software is installed for a long time, it is best to set the page file to more than 4 times the memory2It is recommended to turn it on"Disk cache write function", which is also the system default!

In"My computer"Select a disk, right-click and click "Properties" - Hardware --- Properties --- checked"Enable write caching on disk"--- OK to restart your computer!

This is a file system error caused by an abnormal shutdown of the software or system, and you can fix it.

1) Enter -chkdsk in Start-Run to fix it. No follow-up action is required after this item is resolved.

2) My computer c inventory right-click,Properties-Tools-Error-Start checking-Select both items,Then start,It lets you restart,When you enter the system again, don't press the button when you check the windows,Let it scan and then enter the system to see if there will be an error。

3) If the above two methods do not work, my computer, right-click on the C drive-Properties-Hardware-Properties-click the "Policy" tab. Remove the check mark before the Enable Write Cache on Disk checkbox, and then make sure that this feature will be removed for advanced optimization systems, because it is not very effective for the current configuration machine and takes up a certain amount of hard disk space and causes fragmentation.

4) If the above still can't, find the location it prompts, and delete the error file (note that the prompted directory is often a hidden directory, first check all the files in the Tools - Folder Options - View on my computer).

Usually the first way will solve the problem, you try it.

Method 1: First, select the drive letter you need to troubleshoot, such as the D drive, and then select the right keyboard character"attributes", and then select in the tab"tools"In"Check for errors""Start checking", and both checkboxes are selected in the pop-up dialog box. Then select Start, restart the computer according to the prompts, and then when you enter the Windows system, the system will perform a disk check, and if you find a file system error, it will replace and repair the operation.

Wait for the system to complete the disk check, and then log in to the system, and the problem is solved.

Method 2: Enable Write Cache on Disk: In Windows Explorer, right-click on the hard disk and click"attributes"。

Click the Hardware tab. Click on the hard drive, and then click"attributes"。Click"Strategy"tab.

Click to clear"enable write caching on the disk"(Enable Write Cache for Disk) check box, and then click twice"OK"。

It is estimated that you have used optimization software or are poisoned resulting in the loss of system files. Method: 1Kill the virus first. 2.Fix with the Gold Mountain First Aid Kit. 3.If the above does not work, put the system disc into the optical drive for repair and installation.

It may or may not be serious, it depends.

There are a lot of things to talk about this one, so check it yourself, or find someone who understands it to help you see it on the spot.

The most serious case is that the hard disk has bad sectors, but it is said that it can be solved even under formatting.

Others may be referred to.

Is it that the partition where you installed the system is running out of space, and Windows can't allocate enough system cache for itself.

This is a typical problem of poor hard disk contact or bad hard disk sectors.

If it fails to write to disk, check the hard disk, scan it with a scanning tool or replace it.

See if the data cable is in poor contact.

This is a problem with the disks, please fix it (fix it for each disk).

Built-in disk repair method:

The specific steps are as follows: select the drive letter in My Computer, right-click, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically Repair File System Errors" and "Scan and Recover Bad Sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing the above method, a box will pop up, the point is, automatically shut down and repair at boot).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

You can take a look at the theoretical reasons for delayed write failures, but according to my experience, a delayed write failure is often caused by poor contact of disks (hard disks, USB flash drives, etc.).