Are sunshine panels flame retardant? What is the difference between flammable and flame retardant li

Updated on number 2024-05-18
9 answers
  1. Anonymous users2024-02-10

    Flame retardant class B1.

    If you want a higher level of flame retardant effect, you can use flame retardant pellets to produce HB level.

    10mm three-layer sunlight panel.

  2. Anonymous users2024-02-09

    The ordinary sunlight board sold on the market is not flame retardant, and flame retardant materials can also be used to produce flame retardant sunlight board, the cost of flame retardant sun board is much higher, mainly depending on your own needs.

  3. Anonymous users2024-02-08

    The sunlight board has strong light transmittance, impact resistance, heat insulation, weather resistance, condensation resistance, flame retardant, sound insulation and good processing performance. The impact resistance of the solar panel is 100 times that of ordinary glass and 30 times that of plexiglass. The exterior of the sun panel is UV-resistant.

    After the process, it has anti-aging properties and successfully solves other engineering plastics.

    Aging problems that cannot be solved; The fire performance of the sunlight board can reach the flame retardant B1 level;

  4. Anonymous users2024-02-07

    There are many levels of flame retardant, and ordinary sunlight panels can only reach B1 flame retardant. The PC solar panel itself has a ignition point of 580, which will not produce toxic gases when burning, will not contribute to the spread of fire, and will be extinguished after leaving the fire.

    Higher levels of flame retardant need to be customized, in line with EU RoHS directives and strict UL safety regulations, UL94 fire rating reaches V0, V2, HB. Sunshine board manufacturers -18 6 No. 75 70 in the middle of the 208 6 can be customized V0 flame retardant board, the flame retardant of the sun board is achieved by adding flame retardants, and the requirements for raw materials and production processes are very high.

  5. Anonymous users2024-02-06

    1. The sunlight board is flame retardant. The photovoltaic board is mainly made of PC PET PMMA PP material, referred to as hollow board, and the PC photovoltaic board is manufactured with polycarbonate as the main raw material. In the mid-80s, solar panels made a rapid use of architectural decoration materials.

    Second, the use of the sunshine board:

    1. Strange decoration of gardens and amusement places and corridor pavilions of rest places;

    2. The interior and exterior decoration of commercial buildings and the curtain walls of modern urban buildings;

    3. Aviation transparent containers, motorcycle front windshields, airplanes, trains, ships, automobiles, motorboats, submarines and glass military and police shields;

    4. Layout of kiosks, advertising signs, light box advertisements and exhibitions;

    5. Instruments, meters, high and low voltage switchgear panels and military industry, etc.;

    6. High-end interior decoration materials such as walls, roofs, and screens;

    7. Noise barriers on highways and urban elevated roads.

    3. Features of the sunshine board:

    1. Light transmittance: The light transmittance of the PC solar panel can reach up to 89%, which can be compared with glass. The UV coated board will not produce yellowing, atomization, and poor light transmission when exposed to sunlight, and the light transmission loss is only 10% after ten years, the PVC loss rate is as high as 15%-20%, and the glass fiber is 12%-20%.

    2. Impact resistance: the impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic plate of the same thickness, and 2-20 times that of tempered glass.

    3. Anti-ultraviolet: One side of the PC board is co-extruded with anti-ultraviolet (UV) coating, and the other side has anti-condensation treatment, which integrates the functions of anti-ultraviolet, heat insulation and anti-fog droplets. It can block the passage of ultraviolet rays and is suitable for protecting valuable artworks and exhibits from ultraviolet rays.

    4. Light weight: the specific gravity is only half of that of glass, saving the cost of transportation, handling, installation and supporting the frame.

    5. Flame retardant: The national standard GB8624-2006 confirms that the PC sunshine board is flame retardant Class B. The ignition point of the PC board itself is 580, and it will self-extinguish after leaving the fire, and will not produce toxic gases when burning, and will not contribute to the spread of fire.

    6. Bendability: It can be installed into arches, semicircular roofs and windows in the form of cold bending on the construction site according to the design drawings. The minimum bending radius is 175 times the thickness of the plate used, and hot bending is also possible.

    7. Sound insulation: The sound insulation effect of the PC sunshine board is obvious, and it has better sound insulation than the glass and acrylic board of the same thickness.

  6. Anonymous users2024-02-05

    It is non-combustible and belongs to B1 flame retardant materials. Where are you?

  7. Anonymous users2024-02-04

    According to the test of the testing center, the sunlight board can reach the B1 flame retardant level.

  8. Anonymous users2024-02-03

    The flammable lighting board is a relatively common lighting board on our market, which will burn when it encounters an open flame. Flame retardant lighting board is produced with a flame retardant resin as the material, which is relatively high.

  9. Anonymous users2024-02-02

    Class 1 flame retardant lighting panel.

    Resin composition: DIC high-quality reactive flame retardant resin.

    Fiber reinforcement: Taishan alkali-free non-twisted glass fiber.

    Surface treatment: The surface is coated with MELINEX301 film.

    Stiffener line: tensile stiffener line with a longitudinal uniform distribution spacing of 13mm on the surface Unit weight: 1800g 2400g 2750g 3050g

    Nominal thickness: Operating temperature: -60 to +140

    Light transmittance: 80% 2% (transparent) 75% 2% (transparent blue) 53% 2% (milky white).

    UV resistance: 99%.

    Oxygen index: 30

    Warranty period: 10-20 years.

    Scope of recommendation: Steel-making plants, blast furnace operations and other plants with extremely high requirements for FRP lighting panels.

Related questions
4 answers2024-05-18

1. Recognize the famous brand, which is also the most worry-free way at present, in the face of chaotic market conditions, most consumers have a feeling of dazzle, which also brings great difficulty to our purchase. Therefore, choosing a brand-name product with a higher reputation can save us a lot of time. 2. Waterproofing should be comprehensiveIn order to do everything without omission, we cannot let go of any parts that may cause water leakage, including bathrooms, floors, walls and many other parts. >>>More

4 answers2024-05-18

As of August 2019, all trucks are required to be fitted with tail reflectors. >>>More

8 answers2024-05-18

Not necessarily. But most people like it. It looks very clean because of sunlight. Relaxed. It feels good. >>>More

7 answers2024-05-18

Epiphyllum is not tolerant to frost and is also afraid of strong light exposure, and is native to the tropical deserts from Mexico to Brazil in the Americas. The climate there is dry and hot, but at night it is much cooler. Blooms at night, which can avoid strong sun exposure; Shortening the flowering time can greatly reduce the loss of water, which is conducive to its survival. >>>More

8 answers2024-05-18

If you have a big place in your home and a big garden, you can raise peacocks. >>>More