-
General TP-Link wireless router: Now the general price is about 110RMB -- the following is the most popular PSP using the wireless router architecture of the wireless network Internet access--- first to ensure the physical conditions: a PSP can be accessed Wireless router (has been connected to the network) or to pay the Internet fee to the relevant telecommunications department, just complete the setup operation on the computer (enter the account number and password) and change the English to Chinese operation with PSP search signal.
Tutorial) Usually the one with the strongest signal is your wireless router Figure 1 As long as the router has been networked, you don't need to set up pppoe, all the way to simple customization Press the right arrow key to go down Test the connection: After the test play, press Establish connection point Then congratulations that you can go online Remarks: The security in Figure 1 is generally set a password, and the encryption method is generally directly displayed Directly -> Enter the key, enter the key you set all the way -> down to address setting selection custom IP address c Select automatic DNS setting Select automatic proxy server Select do not use internet browser Select do not start All the way -> Go down Finally, enter Test Connection Test Success Instructions You can rely on this connection point to surf the Internet.
-
Haven't you ever seen a router that you wouldn't look for yourself?
-
Wireless routers come in a wide variety of shapes, and they all look like this.
-
To put it simply, a wireless router is a terminal, which is equivalent to the computer we commonly use, and the wireless router is nothing more than a difference in the transmission medium.
The set up wireless router will complete Internet access by obtaining an IP address (PPPoE, dynamic IP or static IP) for accessing the Internet, establish a link that can access Internet resources normally, and then use some technology (NAT) to enable the devices connected to the wireless router to access the Internet normally.
A wireless router is a router that is used for users to surf the Internet and has a wireless coverage function. A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops, Wi-Fi-enabled mobile phones, tablets, and all Wi-Fi enabled devices) through antennas.
Popular wireless routers on the market generally support four access modes: dedicated line XDSL cable, dynamic XDSL, and PPTP, and generally can only support 15 or 20 devices at the same time. It also has some other network management features, such as DHCP service, NAT firewall, MAC address filtering, dynamic domain name, etc.
The signal range of a general wireless router is 50 meters in radius, and some wireless routers have a signal range of 300 meters.
-
1. The routing mode refers to the way the router will work.
2. There are five types of routing modes, namely:
Router mode: The route mode is the most commonly used mode of wireless routers, such as the PPPoE Internet access mode (ADSL), which is commonly used in homes, requires the wireless router to work in the routing mode.
AP (Access Point) mode: A wireless router working in AP mode is actually used as a wireless switch, which has the same function as a normal Ethernet switch.
Repeater mode: The relay mode of the wireless router is mainly used to expand the wireless network, which is often referred to as the WDS function, to use the relay mode, there must be multiple wireless routers, and the wireless routers rely on the SSID number to distinguish between them (of course, multiple wireless routers can also be set to the same SSID number, so that the client can access the network without changing the SSID number anywhere).
Bridge: Similar to trunk mode, the bridge mode is used to extend the coverage of the wireless network, but the wireless router working in bridge mode can only connect to other wireless routers or wireless APs and cannot connect to clients (such as tablets, mobile phones, etc.).
Client: A wireless router working in client mode is equivalent to a wireless network card, if the user's host does not have a wireless network card, you can use a network cable to connect to a wireless router working in client mode, and then you can connect to other wireless routers.
There is no doubt that the problem should be approached in this way: >>>More
Changed the IP address of the LAN port of your wireless router to 251-253. Then turn off the DHCP of the wireless router. Directly connect the network cable pulled from the line to the LAN port to access the Internet View the original post
Hello, it must be that your router has not been set up successfully, your broadband login has not been successful, and there is your computer room desktop, and you can also use portable wifi. Receive signals from your wireless route. Recently, one of the more popular ones on the Internet Tencent National WiFi feels more suitable for you to use. >>>More
The setting method of connecting Tietong broadband wired router to wireless router is as follows: >>>More
Quite simply, because the router is also a Layer 3 device of the OSI, the IP address you receive is managed by the wireless router rather than the route in the background of the organization that can provide you with Internet access, so you cannot access the Internet. Therefore, the simple point is to turn off the DHCP function of the wireless router, and connect the LAN interface of the wireless router to the incoming wire. This is actually downgrading a wireless router to a wireless switch, but as long as it can be used.